The open-circuit characteristic of a shunt-excited d.c. machine, runat 1200 rev/min, is:Terminal voltage (V)Field current (A)47 85 103 114 122 127 135 1410-2 0:4 0-6 0-8 1-0 1.2 1-6 2:0The field coil resistance is 55 2. Determine: (i) the value of thefield-regulating resistance to enable the machine to generate 120 V onopen circuit when run at 1200 rev/min; (ii) the value of the open-circuitvoltage when the regulator is set to 20 2 and the speed is reduced to800 rev/min.

Answered: Image /qna-images/answer/9f57c58c-dacd-488d-a645-e53a4bde4d28.jpg

The open-circuit characteristic of a shunt-excited d.c. machine, run at 1200 rev/min, is: 85 103 114 122 127 135 141 Terminal voltage (V) Field current (A) 47 0-2 0:4 0-6 0-8 1-0 1-2 1-6 2:0 The field coil resistance is 55 N. Determine: (i) the value of the field-regulating resistance to enable the machine to generate 120 V on open circuit when run at 1200 rev/min; (ii) the value of the open-circuit voltage when the regulator is set to 20 2 and the speed is reduced to 800 rev/min.

The open-circuit characteristic of a shunt-excited d.c. machine, run at 1200 rev/min, is: 85 103 114 122 127 135 141 Terminal voltage (V) Field current (A) 47 0-2 0:4 0-6 0-8 1-0 1-2 1-6 2:0 The field coil resistance is 55 N. Determine: (i) the value of the field-regulating resistance to enable the machine to generate 120 V on open circuit when run at 1200 rev/min; (ii) the value of the open-circuit voltage when the regulator is set to 20 2 and the speed is reduced to 800 rev/min.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Q20) A 1000rpm DC shunt generator is supplying 100 lamps of 60W at 230V, the armature and field resistance are respectively 0.1Ω and 115Ω.Calculate the generated emf. a. 232.809 V b. 222.809 V c. 212.809 V d. 242.809 V
The input current of a 16 hp, 400V, 25 Hz, 2-pole single-phase series motor at full-load is 60A. Motor equivalent resistance and reactionance are 0.3 Q and 0.525 Q, respectively. Knowing that at this full load current the equivalent current to iron losses is 20 A. Use phasor diagram to calculate: a. Find motor speed, torque and power factor. b. If the motor is connected to 267 V, 16.667 Hz source, find motor speed, torque, the output horsepower and power factor at the rated current.
A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction driveis used in an electric car. The drive has the following parameter values in Ω/phasereferred to the stator:R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 ΩX1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 ΩThe total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: b ) Compute the speed, output torque, power and stator current d) Calculate the efficiency when the motor is operated at rated voltage andfrequency. answer：b) n= 985 rpm; Torque T= 1.18 x104 Nm; Power= 1.22 x106 W; Stator current I = 175.72 /32.79° (d) Efficiency = 86.4%
The following test data are taken from 60kW, eight pole, 400 V, 50 Hz, class C, junction IM.DC Test: RDC = 0.152Ω Idle test:VNL = 400 , V f = 50 Hz , INL = 30 A ,PNL = 3400 W Locked-rotor TestVBR = 80 , Vf = 12.5 Hz IBR = 120 A ,PBR = 6500 W a) Find the velocities of the stator and rotor magnetic field? b) Find the value of smax and Tmax? c) Input current I1 and Input power Pin? d) Air gap power PAG and Rotor copper losses PRCL? e) Ind. Mek. Power Pconv and Output power Pout? f) Tconv the generated moment, Tout the spindle moment, and the efficiency of the motor ɳ? g) Find the value of smax and Tmax? h) Find the circuit parameters? i) Draw the per phase equivalent circuit of this motor?
A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction drive is used in an electric car. The drive has the following parameter values in Ω/phase referred to the stator: R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 Ω X1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 Ω The total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: a) Draw the equivalent circuitb) Compute the speed, output torque, power and stator currentc)Determine the power factor and whether leading or lagging d)Calculate the efficiency when the motor is operated at rated voltage and frequency.
4. Two shunt generators operating in parallel have each an armature resistance of 0.02 . The combined external load current is 2500 A. If the generated e.m.fs. of the machines are 560 V and 550 V respectively, calculate the bus-bar voltage and output in kW of each machine. Subject: Electrical Machine 1
Determine the diameter and length of stator core, for a 11 kW, 400 V, 3 phase, 4-pole, 1425 rpm delta connected induction motor. B,, = 0.45 Wh/m², ac = 23000 amp. cond./m, full load efficiency = 0.85, pf= 0.88, L/t = 1.
10.a. A certain pump is capable of delivering 625 gpm, efficiency is rated at 75%, and the sum of the staticand friction heads is 2 ft. What is the horsepower of this pump?A. 0.417B. 4.17C. 0.589D. 5.8910.b. The power factor of a plant may be improved by installingA. synchronous motorsB. squirrel-cage motors.C. d-c motors.D. wound-rotor motors
A small DC motor has resistance R = 4.5 Ω and torque constant = 0.6 [Nm/A] which can also be called the voltage constant and is measured in [V/(rad/s)]. The motor has a nominal voltage of 44 V. In the calculations below, the motor is connected to 44 V. a) Calculate the idle speed or idle angular velocity b) Calculate the torque if the motor is loaded so that the current is 0.8 A c) Calculate the speed or angular velocity if the motor is loaded as in b) d) Calculate the electrical power supplied to the motor under load according to b)
Two dc shunt generators, each with armature resistance of 0.02 ohm and field resistance of 50 ohms run in parallel and supply a total current of 1000 A to the load circuit. If their emf's are 270 V and 265 V, solve the bus bar voltage. Subject:Electrical Machine 1
A 1,000-kVA, 3,000-V, 50-Hz, 3-(, star-connected alternator has an armature effective resistance of 0.2Ω. A field current of 40A produces a short-circuit current of 200A and an open-circuit emf of 1040V (line value). Calculate the full load percentage regulation at a pf of 0.8 lagging. -21.43%b. 21.43%c. -24.31%d. 24.31%
The following data were obtained from the tests performed upon a 10Hp 230V 6-pole induction motor. No Load Test: VNL = 230V Pt = 410W I = 8.5A Load Test: VL = 230V Pt = 8350W I = 23A N = 1140 rpm Effective resistance of stator per phase = 0.14 ohm Friction + windage loss = 210W Calculate a. horsepower output b. load torque c. load efficiency d power factor