The resistance and inductance of a coil can be obtained by connecting the coil in series with a known resistance R and measuring the coil voltage Vcoil, the resistor voltage VR and the total voltage V. The frequency must also be known, but the phase angles of the voltages are not known. Given that f = 60Hz , R = 10 ohm Vcoil

The resistance and inductance of a coil can be obtained by connecting the coil in series with a known resistance R and measuring the coil voltage Vcoil, the resistor voltage VR and the total voltage V. The frequency must also be known, but the phase angles of the voltages are not known. Given that f = 60Hz , R = 10 ohm Vcoil

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.27P: An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8...

See similar textbooks

Similar questions

Assume that the voltage drop across the resistor, ER, is 78 V, that the voltage drop across the inductor, EL, is 104 V, and the circuit has a total impedance, Z, of 20 . The frequency of the AC voltage is 60 Hz. ETITZ20VAPFER78VIRRPEL104VILXLVARsLL
Three capacitors having capacitance values of 20F,40F, and 50F are connected in parallel to a 60 - Hz power line. An ammeter indicates a circuit current of 8.6 amperes. How much current is flowing through the 40F capacitor?
The resistance and inductance of a coil can be obtained by connecting the coil in series with a known resistance R and measuring the coil voltage Vcoil, the resistor voltage V and the total voltage V. The frequency must also be known, but the phase angles of the voltages are not known. Given that f = 60 Hz, R = 10 R. Vcoil = 22.4 V, VR= 20 V and V = 36 V. find the resistance and inductance of the coil. please use reference photo
The resistance and inductance of a coil can be obtained by connecting the coil in series with a known resistance R and measuring the coil voltage Vcoil, the resistor voltage Vr and the total voltage V. The frequency must also be known, but the phase angles of the voltages are not known. Given that f = 60 Hz, R = 10 ohms, Vcoil = 22.4 V, Vr = 20 V and V = 36V. Calculate Xl and Xc
A coil has an inductance of 478µH.What is its reactance in 1000Hz ac circuit? 3.00ohms if connected in series with a resistor of 4.00ohms. What is the reactance of a 3.00microfaradcapacitor? What is the impedance of thecapacitor in series of 300ohms? What would be the current if the capacitorand resistor are connected in series with1200V line?
11. Consider a network shown in the figure consisting of a resistance, a capacitor, an inductor and three alternating voltage sources 1, 2 and 3. Terminal voltages of the sources 1, 2 and 3 are v₁ = Vo sin(t), V₂ = Vo sin(cot +120°) and v3 = Vo sin(ot+240°) respectively and moduli of the reactance of the capacitor and the inductor are equal to the resistance. Then 10 3 P (A) Peak value of voltage at point P is vo (√3+1) (B) Peak value of voltage at point P is vo (√3-1) (C) Vp = Vo (√3+ 1) sin(oot +90) (D) vp = Vo (√3-1) sin(oot + 180)
A sinusoidal 50 Hz voltage of 200 V (rms) supplies the following three circuits which are in parallel: (a) a coil of inductance 0.03 H and resistance of 3 ohms, (b) a capacitor of 400 microFarad in series witha resistance of 100 ohms and (c) a coil of inductance 0.02 H and resistance 7 ohms in series with a 300 microFarad capacitor. Find the total current supplied?
How come you have not taken into consideration the impedance of the inductor in the first part of the solution when calculating the current?
1. For the following sinusoids, determine which one leads and by how much a. ?(?) = 10cos (4? − 60°) and ?(?) = 6sin (4? + 50°)b. ?ଵ(?) = 4cos (377? + 10°) and ?ଶ(?) = −20cos(377?)c. ?(?) = 13 cos(2?) + 5 sin(2?) and ?(?) = 15cos (2? − 11.8°)
Electrical Engineering --question 1-- Calculate the theoretical voltages across the resistor and inductor for 10 kHz and 60 kHz using the 680Ω theoretical resistance, 3.3 mH inductance, and 5-V source. Demonstrate the step-by-step process. Answer must be in Polar form. --question 2-- Calculate the theoretical voltages across the resistor and capacitor for 500 Hz and 1750 Hz using the 680Ω theoretical resistance, the observed capacitance, and the 5V source. Demonstrate the step-by-step process. Answer must be in Polar form.
Q.) Two coils with inductances L1 = 10H and L2 = 12H are connected in series and spaced apart so that they do not influence each other. • What is their equivalent inductance? • We place the coils together in such a way that their mutual inductance is LM = 7H. What is their equivalent capacitance if they are wound in the same direction, and what is it if they are wound in opposite directions?
An air-cored choking coil is subjected to an alternating voltage of 100 V. The current taken is 0.1 A and the power factor 0.2 when the frequency is 50 Hz. Find the capacitance which, if placed in parallel with the coil, will cause the main current to be a minimum. What will be the impedance of this parallel combination (a) for currents of frequency 50 (b) for currents of frequency 40?