The results of a constant-head permeability test for a fine sand sample having a diameter of 70 mm and a length of 140 mm are as follows (refer to Figure 7.5):• Constant-head difference = 550 mm• Water collected in 7 min = 450 cm3• Void ratio of sand = 0.8Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity

The results of a constant-head permeability test for a fine sand sample having a diameter of 70 mm and a length of 140 mm are as follows (refer to Figure 7.5):• Constant-head difference = 550 mm• Water collected in 7 min = 450 cm3• Void ratio of sand = 0.8Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.17P

See similar textbooks

Similar questions

The results of a constant-head permeability test for a fine sand sample having a diameter of 150 mm and a length of 300 mm are as follows: constant head difference = 500 mm, water collected in 5 min = 350 cm3, void ratio of sand = 0.61. Determine the hydraulic conductivity.
The results of a constant-head permeability test for a fine sand sample having a diameter of 150 mm and a length of 300 mm are as follows • Constant-head difference = 500 mm • Water collected in 5 min = 350 cm3 • Void ratio of sand = 0.61 Determine: a. Hydraulic conductivity, k (cm/sec) b. Seepage velocity
During a constant head permeability test on a sand sample, 260 x 10^3 mm^3 of water were collected in 2 minutes. If the sample had a length of 100 mm, a diameter of 40 mm and a maintained head of 200 mm. What is the coefficient of permeability in mm/s?
For a constant head permeability test in a sand, the following values are given:• L 350 mm• A 125 cm2• h 420 mm• Water collected in 3 min 580 cm3• Void ratio of sand 0.61Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity
2. Situation 2 - For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen = 16 cm Diameter of specimen = 96 mm Constant Head Difference = 50 cm Volume of water collected in 4 min = 420 cc Void ratio of the soil specimen = 0.55 a. Determine the hydraulic conductivity of the soil in m/min. Round off to four decimal places. b. Determine the discharge velocity in m/min. Round off to four decimal places. c. Determine the seepage velocity in m/min. Round off to four decimal places.
For a constant-head permeability test in a sand, the following are given: (L = 300 mm, Water collected in 3 min = 620 cm^3, A = 175 cm^2, Void ratio of sand = 0.58, h = 500 mm). Determine the seepage velocity.
For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen: 16 cm. Diameter of specimen: 96 mm. Constant head difference: 50 cm. Volume of water collected in 4 min.: 420 cc Void ratio of the soil specimen: 0.55 Determine the hydraulic conductivity of soil in m/min.
For a decreasing load permeability test, the following are given values: - Sample length: 200 mm - Soil sample area: 1000 mm² - Piezometer area: 40 mm² - Load difference at instant t = 0: 500 mm - Load difference at instant t = 180 s: 300 mm Determine the hydraulic conductivity of the soil in cm/s.
For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen: 18 cm. Diameter of specimen: 95 mm. Constant head difference: 54 cm. Volume of water collected in 4.10 min.: 423 cc Void ratio of the soil specimen: 0.54 Determine the seepage velocity in m/min.
Situation 2 - For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen = 16 cm Diameter of specimen = 96 mm Constant Head Difference = 50 cm Volume of water collected in 4 min = 420 cc Void ratio of the soil specimen = 0.55 a. Determine the seepage velocity in m/min. Round off to four decimal places. b. determine the discharge velocity in m/min. Round off to four decimal places.
The data from a falling-head test on a silty clay are: Cross sectional area of soil = 1000 mm^2 Length of soil sample = 200 mm Area of stand pipe = 40 mm^2 Head difference at time t = 0 is 500 mm Head difference at time t = 3 min is 300 mm a) Determine the hydraulic conductivity of the soil in cm/sec. b) What is the head difference at time t = 100 sec in mm
A constant head permeability test was carried out on a cylindrical sample of sand 10 cm diameter and 15 cm height. 160 cm³ of water was collected in 31.75 sec under a head of 30 cm. 1. Compute the coefficient of permeability in cm/s. 2. Compute the velocity of flow in m/s.