I ReviewPart AThe shaft is supported at its ends by two bearings A and B andis subjected to the forces applied to the pulleys fixed to the shaft.(Figure 1) The T = 585-N forces act in the -z direction and the200-N and 80-N forces act in the +y direction. The journalbearings at A and B exert only y and z components of force onDetermine the resultant normal force on the cross section at C.Express your answer to three significant figures and include appropriate units.the shaft.HAFigure1 of 1Nc =ValueUnitsSubmitRequest Answer400 mm150 mm150 mmВPart B200 mm200 mmDetermine the resultant shear force in the y direction on the cross section at CD300 mm80 NExpress your answer to three significant figures and include appropriate units.80 N200 NHA?A200 N(Vc), =ValueUnitsSubmitRequest AnswerP Pearson

Moment about point A about z-axis:∑ MAz=022000.7+2801+By0.4=0BY=-314.286 NEquilibrium about…

The shaft is supported at its ends by two bearings A and B and is subjected to the forces applied to the pulleys fixed to the shaft. (Eigure 1) The T = 585-N forces act in the -z direction and the 200-N and 80-N forces act in the +y direction. The journal bearings at A and B exert only y and z components of force on the shaft.

The shaft is supported at its ends by two bearings A and B and is subjected to the forces applied to the pulleys fixed to the shaft. (Eigure 1) The T = 585-N forces act in the -z direction and the 200-N and 80-N forces act in the +y direction. The journal bearings at A and B exert only y and z components of force on the shaft.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The three forces act on the pipe assembly. If F1 = 80N and F2= 50 N replace this force system by an equivalent resultant force and couple moment acting at O. Express the results in Cartesian vector form.
The compound shaft shown consists of a solid shaft AB made ofbronze [G = 40 GPa], and a solid shaft BC made of steel [G = 85 GPa].The compound shaft is subjected to torques TB = 700 N.m at point B,and TC = 200 N.m at point C, acting in opposite directions.[LAB = 900 mm, LBC = 1200 mm, dAB = 35 mm, dBC = 25 mm]Determine (a) the internal torques in shafts AB and BC, (b) the shearstresses in shafts AB and BC, and (c) the angle of twist at point C.
the mobile crane (weight =48 kN) moves across the brige of length, l =14m. the front wheels of the mobile carry the three-quarter of its weight while the rear wheels carry a quarter of its weight. iif the distance between front and rear wheel is b = 0.7m. Determine themaximum value of bending moment as it moves across
Help ASAP P= 541kN determine vertical reaction at A(in kN) 3 decimals
reply asap!! An 8-meter long horizontal beam is supported to the left end by a fixed support and supported to the right end by a roller support. A uniformly varying load from O at the left end to 50 kN/m at the right end is applied onto the beam. Assume that the vertical reaction at the roller support is 165% of the vertical reaction at the fixed support. Calculate for the value of the maximum bending moment in the beam (in kN-m). Input to the nearest two decimal places. Add a negative sign before the numerical value of your answer if needed.
The 600mm diameter steel shaft is subjected to the torques shown. Determine torsion at each section. Assume G = 75 GPa. P=74 1.5P= 1.5(74) = 111 kNm 3P= 3(74)= 222kNm
The sector gate UE is submerged in water as shown in the figure. The sector gate is one-twelfth pf a circle of radius 4.98m. It has a length of 10.4m. Determine the horizontal components (kN) of the resultant force acting on gate.
Using a ring collar, the 75-N force can act in thevertical plane at various angles θ. Determine the magnitudeof the moment it produces about point A, plot the result of M(ordinate) versus θ (abscissa) for 0° ≤ θ ≤ 180°, and specifythe angles that give the maximum and minimum moment.
The 0.67-lb slider moves freely along the fixed curved rod from A to B in the vertical plane under the action of the constant 1.1-lb tension in the cord. If the slider is released from rest at A, calculate its speed v as it reaches B.
1) a Compressor with a diameter of 0,65 metres and a thickness (t)= 4mm Sigmax= 42 MPA and Sigmay=84MPA Calculate: The pressure P and Maximum In-Plane Shear Stress Tmaxvlak in MPA 2) an element has undergoing a rotation of Theta= 30 degrees Sigmax= 75 MPA and sigma y= 55 MPA. Calculate X', Y' and Txy" in MPA 3) A uniform Beam with a lenght of 2 metres to a-a and forces N=12kn and V=4kn. Calculate the main stresses sigma1 and sigma 2 [in MPA] 4) an element with the given stresses: Sigmax=75 MPA and Sigmay= 55 MPA Calculate the Absolute maximum shear stress in MPA )Tabsmax)
Three cables pull on the pipe such that they create a resultant force R. Two of the cables are subjected to known forces as shown. Assuming all forces are coplanar, determine: (a) the partial resultant P of the two known forces and (b) the minimum R if ?? = 23°. What is the corresponding magnitude of F? Also, (c) resolve the minimum R in its components in f and m axes which coincide with the lines of action of the 600 and 400-lb forces, respectively. Note that the sense of F in the figure is just assumed.
a) Compute R1 in Newton. b) Compute R2 in Newton. c) Compute the value of EIy at the midspan of the beam in kN-m^3.