The solid 30-mm-diameter shaft is used to transmit the torques applied to the gears. Figure 300 Nm 500 Nm 300 mm 400 mm 200 Nm 500 mm 400 Nm. 1 of 1 Part A Determine the absolute maximum shear stress on the shaft. (Figure 1) Express your answer with the appropriate units. Tmax= Submit Provide Feedback HA Value Request Answer Units ?

The solid 30-mm-diameter shaft is used to transmit the torques applied to the gears. Figure 300 Nm 500 Nm 300 mm 400 mm 200 Nm 500 mm 400 Nm. 1 of 1 Part A Determine the absolute maximum shear stress on the shaft. (Figure 1) Express your answer with the appropriate units. Tmax= Submit Provide Feedback HA Value Request Answer Units ?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

There are two pairs of closed soft tooth surface spur gears A and B,Parameters of A: modulus m = 2mm, number of teeth Z1 = 40, Z2 = 90 , width of teeth b = 60mm.Parameters of B : modulus m = 4mm, number of teeth Z1 = 20, Z2 = 45 , width of teeth b = 60mm.The accuracy of the two pairs of gears is grade8, and other conditions are the same. Try to compare the contact fatigue strength and bending fatigue strength of the two pairs of gears? And explain the reason.
An electric motor develops 6 HP at 3000 rpm. An 18 tooth gear is fitted to its shaft to drive a gear on an output shaft. How many teeth would be needed on this output gear if an output torque of 100 Nm is required? Answer: Ti vious page Next page https://learnonline.gmit.ie/mod/quiz/attempt.php?attempt-126637&cmid-1429658page-3# CHao Search for anything FI1 F10 F8 F9
Two mating gears of 20 and 50 teeth of 20° pressure angle has path of contact equal to 35 mm What will be the arc of contact, (cos20 = 0.9397, tan 20°= 0.36397)
The gears shown in the figure form an ideal transmission mechanism. Shaft a applies 8.7 Nm of torque to the pinion (gear 2), which rotates clockwise at 2,312 revolutions per minute. All of the gears have a 20 degree pressure angle. Gears 2 and 3 have a module of 2.5 mm, while gears 4 and 5 have a module of 4 mm. What is the speed of shaft c? Express your answer in units of revolutions per minute. McGraw-Hill Companies, Inc for y 12T NO # + C 3 36T- to 스 3/2 X 18T 30T 5
You have been asked by your engineering company to design a complete gear and shaft system shaft that is made of steel. The solid shaft is linked with gear A, B. C and D with gear A., B and C produces torque of 15 kNm (clockwise), 30 kNm (clockwise) and 75kNm (anticlockwise). respectively each. If AB = 0.70m, BC= 0.80 m and CD=0.90 m with the shafts consist of solid circular shafts with a diameter of 150 mm having the shear modulus of G = 80 GPa, b) The shafts are now to be redesigned by drilling only through shaft BC with a diameter hole, cz to produce a hollow shaft BC. It is also known that the allowable shear stress, Tall in the shaft must not exceed 85 MPa. i) Determine the minimum wall thickness of the shaft BC, tBc
You have been asked by your engineering company to design a complete gear and shaft system shaft that is made of steel. The solid shaft is linked with gear A, B, C and D with gear A, B and C produces torque of 15 kNm (clockwise), 30 kNm (clockwise) and 75kNm (anticlockwise). respectively each. If AB = 0.70m, BC=0.80 m and CD=0.90 m with the shafts consist of solid circular shafts with a diameter of 150 mm having the shear modulus of G= 80 GPa. a) Design and detemine the portion of the shaft which has the largest magnitude of shear stress, (7)max. Include free body diagram (FBD) in your analysis.
5.A pair of gears has these parameters: teeth of two gears are Z1=26, Z2=52, modulus m=1.25mm. Please calculate (1)the radius of reference circle of two gears, r1 and r2 (2) The pitch of this pair of gears, p (3) The standard center distance, a (4) Now two gears are mounted with a'=49mm, calculate the radius of two pitch circle for two gears, r1' and r2' . (5)The ratio of angular velocity of two gears, i.
For a pair of standard gears, the module is m=2.5mm，pressure angle is α=20 0. ha*=1. c*=0.25. The teeth number on gear 1 is z1=22. The standard center distance is a=68.75mm. Find the following parameters of gear 2: the teeth number, z2 = ( ) the diameter of reference circle, d2=( )mm the diameter of addendum circle da2 =( )mm the diameter of dedendum circle df2 =( )mm
The input shaft for the gear train shown rotates at 4500 rpm. Compute the train value and the rotational speed of the output shaft ,knowing that the Number of teeth: NA = 17 , NB = 50 , Nc = 20 , Np = 48 , Ne = 14 , NF = 62 B Input shaft D Output shaft E 3 ! F 4. а. TV = 22.0451 O b. n output = 143.95 rpm O c. noutput = 155.45 rpm O d. TV=31.2605 Ое. TV = 31.2605 f. TV = 36.149 g. n output = 241.88 rpm O h. n output = 123.65 rpm
A machine shaft test shown in the figure is running at speed of 200r.p.m requires a torque which varies uniformly from 1200 Nm to 3600 Nm during the first half revolution, remains constant for the next one revolution, decreases uniformly to1200Nm during the next one revolution and the remains constant for the next two revolution, thus completing a cycle of operations. If the flyweel radius of gyeration is 0.6m and fluctuation of speed is +2% of mean speed; find the mass of flywheel required. 3600 1466-7 Tmean 2133-3 1200 Rel 1Rev. tRev. 2 Revolution Crank angle Turning Moment (Nm)
400 mm Fr= 800 150mm C 600 N -Fa = 400 150mm Ft = Draw bending torsional moments, shear forces and normal force diagrams for the given gear shaft system.
An electric motor develops 8 HP at 2652 rpm. An 19 tooth gear is fitted to its output shaft to drive a gear on an output shaft. How many teeth would be needed on this output gear if an output torque of 92 Nm is required? Answer: Next page page Finis Time 9Type here to search