None The system illustrated in the following figure is critically damped. Consider the length of the beam as L, flexural rigidity of the beam as EI and assume K1 = 242 N/m,500L3K2% 580 N/m, K3 = 2K2, M = 0.02 kg and EI =3calculate the damping constant c.Massless beamK1K3参KO 42.06 kg/s7.55 kg/s21.03 kg/s5.61 kg/s3.51 kg/s

Answered: Image /qna-images/answer/9aad618b-42c4-4e0f-a043-df03b294741b.jpg

The system illustrated in the following figure is critically damped. Consider the length of the beam as L, flexural rigidity of the beam as EI and assume K1 = 242 N/m, 500L K2 = 580 N/m, K3 = 2K2, M = 0.02 kg and EI = calculate the damping constant c.

The system illustrated in the following figure is critically damped. Consider the length of the beam as L, flexural rigidity of the beam as EI and assume K1 = 242 N/m, 500L K2 = 580 N/m, K3 = 2K2, M = 0.02 kg and EI = calculate the damping constant c.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Figure 2 shows an electrical motor with mass M=13 kg located at the middle of pinned-pinned beam. A damper with damping coefficient of c=59 N.s/m is also attached to the beam at point A . Considering Young’s modulus of the beam E=98 GPa, moment of inertia of the beam I=18 mm4, length of the beam L=1 m, unbalance mass of m0 =1.9 kg, eccentricity e=2.8 mm, and zero initial conditions, find the steady state amplitude of point A at resonance in millimetre (mm).
Mechanical Vibration Lesson A 65 kg industrial sewing machine has an imbalance value of 0.15 kgm in rotation. The machine operates at 125 Hz and is located on the ground with a spring coefficient of 2 x 106 N / m and a dimensionless damping coefficient of 0.12. Find the uniform regime amplitude of the machine.
Between a solid mass of 10 kg and floor, two slab of isolator, natural rubber and feltare kept in series as shown in Figure Q1(b). The natural rubber slab has a stiffnessof 3000 N/m and an equivalent viscous damping coefficient of 110 Ns/m. The feltslab has a stiffness of 12,200 N/m and an equivalent viscous damping coefficient of170 Ns/m. (i) Sketch the single degree of freedom spring-mass-damper system(ii) Determine the undamped and damped natural frequencies of the system inthe vertical direction. Neglect the mass of the isolator
Figure 1 shows a system comprising a bar with mass m-12 kg and the length of the bar L=2 m, two springs with stiffness kt=1000 N-m/rad and k = 2000 N/m, one damper with damping coefficient c=50 N-s/m and two additive masses at the end of the bar, where each mass (M) is equal to 50 kg. The rotation about the hinge A, measured with respect to the static equilibrium position of the system is 0 (t). The system is excited by force (F) so find the state space representation of the system if the output y=ġ(t).
*An air compressor of 450 kg operates at a constant speed of 1750 rpm. Rotating parts are well balanced, except for the reciprocating part (mass is 10kg and crank radius is 100mm). The mounting introduces a viscous damping of damping factor 0.15. a) What would be the frequency ratio only 20% of the unbalanced force is transmitted to the foundation? b) Find the natural frequency of the system. c) Find the stiffness of the spring for the mounting. d) Find the amplitude of the Unbalance force. e) Find the amplitude of force transmitted to the foundation
An industrial sewing machine of 65 kg has an unbalance value of 0.15 kgm per rotation. The machine operates at 125 Hz and is located on the ground with a spring coefficient of 2 x 106N / m and a dimensionless damping coefficient of 0.12. Find the uniform regime amplitude of the machine.
Write and compare the equation of mechanical and electrical SHO? And a mass stand in floor which execute SHM vertically at 5hz frequency .show that mass losses contact with floor if displacement exceed 1 cm.?
A washing machine with a mass of 60 kg and a drum radius of 15 cm, rotates at 1000 rpm and washes 3 kg of unbalanced laundry. a) How much dynamic force would be transmitted to the ground if no vibration isolation was taken from the machine?b) What would be the stiffness (k) of the visco-elastic floor if an insulation measure with a damping ratio of 0.1 was taken, which would reduce the force transmitted to the floor by 90%?
A 0.20 m long shaf with negligible inertia has a flywheel suspended from the end and a damper to damp the vibrations. The shaft has a torsional stiffness of 5,000 N-m/rad and a modulus of rigidity of 152 Mpa. The flywheel has a moment of inertia of 30 kg-m2 and the damping ratio is 0.4. Calculate the following: a) The damped frequency (in Hz) b) The damping coefficient (in N-m-s) c) The actual angular frequency (in Hz) d) The amplitude reduction factor e) The diameter of the shaft (in mm)
For the system shown in Figure let m=0.5 kg, a=0.2 m, l=0.4 m, k=1000N∕m. Determine the damping coefficient c if the system is to be critically damped, underdamped with zeta=0.09 and overdamped with zeta=1.2. Note that there is gravitational field.
Plz give right answer. Calculate critical frequency of a helical spring of wire diameter 10 mm, mean coil diameter 50 mm and number of active coils 12. Take tau = 550MPa , G = 80kN / m * m ^ 2
A cantilever beam of length 700 mm, width 55 mm and thickness 15 mm is made of steel with Young’s modulus 200 GPa and mass density 7800 kg/m3. The displacement model is assumed to be w(x,t)=q1(t)x2L2w ( x , t ) = q 1 x 2 L 2 where L is the beam length. The damping in the beam is negligible. The beam is excited at location 300 mm from the clamped end with a translational force (in the more flexible direction) of magnitude 10 N at a frequency of 21 Hz (the end of the lecture on adding discrete elements to beam problems gives more detail about including external forces). The maximum steady state response of the end of the beam (in mm)