show complete solution and computation Question 5The table below shows the observed time of walking in a number of paces. After taking five independent time studies, the analyst observed the following:Number in PacesObserved Time (sec)5034.107550.7310067.6915089.71200120.55Using regression line equations, given with a Performance Rating of 90% and Allowance of 15%a. From the data collected, compute the intercept and slope constant. (Show in 4 decimal values)a =b =b. Compute the standard time, in minutes, for walking 500 paces. (Show in 4 decimal values)

a. Paces Time 50 34.1 75 50.73 100 67.69 150 89.71 200 120.55…

The table below shows the observed time of walking in a number of paces. After taking five independent time studies, the analyst observed the following: Number in Paces Observed Time (sec) 50 34.10 75 50.73 100 67.69 150 200 Using regression line equations, given with a Performance Rating of 90% and Allowance of 15% 89.71 120.55 a. From the data collected, compute the intercept and slope constant. (Show in 4 decimal values)

The table below shows the observed time of walking in a number of paces. After taking five independent time studies, the analyst observed the following: Number in Paces Observed Time (sec) 50 34.10 75 50.73 100 67.69 150 200 Using regression line equations, given with a Performance Rating of 90% and Allowance of 15% 89.71 120.55 a. From the data collected, compute the intercept and slope constant. (Show in 4 decimal values)

EBK ELECTRICAL WIRING RESIDENTIAL

19th Edition

ISBN:9781337516549

Author:Simmons

Publisher:Simmons

Chapter29: Service-entrance Calculations

Section: Chapter Questions

Problem 3R: a. What is the ampere rating of the circuits that are provided for the small-appliance loads? _____...

See similar textbooks

Similar questions

a. What is the ampere rating of the circuits that are provided for the small-appliance loads? _____ b. What is the minimum number of small-appliance circuits permitted by the Code? _____ c. How many small-appliance circuits are included in this residence? ____
Use Routh-Hurwitz method, characterize the system defined by the polynomial equation: stable unstable
STABLE OR UNSTABLE ? Use Routh-Hurwitz method, characterize the system defined by the polynomial equation:
In an industrial application in which a conveyor belt with dimensions of 5m long by 2m wide, must transport packages of cement. The plant is known to be located on the Caribbean coast; in addition to the dimensions (d=80mm), the material (4140) and the speed at which the axis works (30 RPM). Select a motor that meets the requirements requested for the operation of the system, also includes the IP protection that the motor must have. Can it be connected directly?
What are static error coefficients? how will you calculate the steady state error using static error coefficients? (Write equations also, about kp, Kv, Ka) subject: control system
Q1a. Explain the following terminologies: Binary State Multi State Hard failure Soft failure Q1b. With the aid of a well labelled diagram, explain the stages involved in a bathtub curve #3 The life of an automotive component can be modelled by a Weibull distribution. ∝ = 6.3?105 , ? = 1.3 Calculate F(t) R(t) h(t) at the end of rotating period of 36,000 miles Q1c How should a reliability program be organized in an environment of concurrent engineering?
Which of the following is false for the system whose block diagram is given below? a) Static speed error coefficient is given by ∞. b) The speed error coefficient is given by ∞. c) A steady state error does not occur at the parabolic input. d) Acceleration error coefficient is given by 2.
Find the transfer function of the quarter car suspension system depicted above schematics as ??/? using the free body diagrams
22. Determine the standard deviation of the height of trees in meters with the data values 5, 4, 8, 9, 9, 14, 6, and 12. (Round off your answer in 2 decimal places and without unit)
Q1. Consider the following characteristic equations. Determine the values of K that corresponds to a stable system. Use the Routh-Hurwitz criterion.
Consider the design of a home-built wind turbine using a 350-W automobile dc generator. The goal is to deliver 70 kWh in a 30-day month. 1- What capacity factor would be needed for the machine? 2- If the average wind speed is 5 m/s, and Rayleigh statistics apply, what should the rotor diameter be? 3- How fast would the wind have to blow to cause the turbine to put out its full 0.35 kW if the machine is 20% efficient at that point? 4- If the tip-speed-ratio is assumed to be 4, what gear ratio would be needed to match the rotor speed to the generator if the generator needs to turn at 1000 rpm to deliver its rated 350 W? 5- If Rayleigh statistics apply, what is the energy generated in a 30-day month when wind blows between its rated wind speed of 13 m/s and its furling wind speed of 25 m/s?
A permanent magnet loudspeaker is equipped with a10 ohm voice coil wound on a tube 1 inch in diameter. Theflux density in the air gap is 10,000 lines per square inch. If the impedance of the voice coil is a pureresistance, what will be the maximum thrust delivered to the core if the impressed signal is 20 dB above 0.005watt? Ans: _____ mN