the torque exerted by the prime D.C. shunt generator which delivers 185A at a terminal p.d. of 240 V if you know the shunt field resistance is 55 ohm ,and the armature resistance is 0.019 ohm , then find E.M.F commercial , mechanical , electrical efficiencies, output of prime and cupper losses , let dynamo Find mover of generated , motor running at 950 r.p.m

the torque exerted by the prime D.C. shunt generator which delivers 185A at a terminal p.d. of 240 V if you know the shunt field resistance is 55 ohm ,and the armature resistance is 0.019 ohm , then find E.M.F commercial , mechanical , electrical efficiencies, output of prime and cupper losses , let dynamo Find mover of generated , motor running at 950 r.p.m

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A 50 kW, 220 V, dc shunt generators has an armature resistance including brushes of 0.026 ohms. If the shunt field resistance is 52 Ω. Find the induced emf at rated load.
Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
A 220 V , 60 Hz , supply is connected to 200 – turn armature winding of reluctance 1.7x105 At / Wb . Find the magnetizing reactance , the rms values of the ( magneto – motive force , exciting and armature currents , magnetic flux ) , and the inductance Draw the phasor diagram of the circuit .
Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt 1-Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * 2-The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * 3-Output of the prime motor…….kwatt * 4-Mechanical , electrical and overall efficiency …….. * 5-Flux per pole is......... wb *
A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.
A DC shunt generator supplies a load of 27 kW at 210 V through the cables of resistance, R = 126 mΩ. If the field winding resistance, Rf = 62 Ω and the armature resistance, Ra = 35 mΩ, Determine (a) the terminal voltage, and (b) the E.m.f. generated in the armature. The terminal voltage is = The E.m.f generated in armature is =
The armature winding resistance of a long shunt connected DC generator is 0.4ohm, the resistances of the shunt and serial field windings are 125 ohms and 0.1 ohms, respectively. While the generator supplies 8KW of power to the load it feeds, which is the voltage it produces since the output voltage is 250V?
111/ The armature reaction of the DC generator reduces the generated EMF. Select one: True False
A series generator having a combined armature and field resistance of 0.4 ohm usrunning at 1000 rpm and delivering 5.5 kW at a terminal voltage of 110 V. If thespeed is raised to 1500 rpm and load adjusted to 10 kW, find the new terminalvoltage. Assume the machine is working on straight line portion of magnetizationcharacteristics.
Dc machines A separately excited D.C. generator has an armature circuit resistance of 0.1 ohms. And the total brush-drop is 2 V. When running at 1000 r.p.m., it delivers a current of 100 A at 250 V to a load of constant resistance. If the generator speed drop to 700 r.p.m., with field-current unaltered, find the current delivered to load.
A 230 V dc machine has an emf constantand . The field is separatelyexcited and produces 0.01 Wb per pole. for all parts ofthe problem. (a) At what speed does the machine operate as adc generator with rated terminal voltage? (b) At what speeddoes the machine operate as a dc motor with rated terminalvoltage? (c) If an external resistance is added in serieswith the armature circuit, at what speed does the machineoperate as a dc motor with rated terminal voltage? (d) If themotor of part (b) is known to be supplying 10 HP to a coupledmechanical load, determine the rotational losses at the point ofoperation ***Any two branches please do not be late