The total real power absorbed by a balanced three-phase delta-connected load is 34 kW. The power factor of the load is 0.87, and the magnitude of the applied line voltage is 365 V. What is the magnitude of the phase current in the delta-connected load (in A)? O a. 21.41 Ob. 7.14 O c. 28.55 O d. 35.69 Oe. 14.28

The total real power absorbed by a balanced three-phase delta-connected load is 34 kW. The power factor of the load is 0.87, and the magnitude of the applied line voltage is 365 V. What is the magnitude of the phase current in the delta-connected load (in A)? O a. 21.41 Ob. 7.14 O c. 28.55 O d. 35.69 Oe. 14.28

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter5: Transmission Lines: Steady-state Operation

Section: Chapter Questions

Problem 5.7P

See similar textbooks

Similar questions

Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of (0.4j2.7) per phase. One of the loads absorbs 560 kVA at 0.707 power factor lagging, and the other 132 kW at unity power factor. The line-to-line voltage at the load end of the line is 2203V. Compute (a) the line-to-line voltage at the source end of the line. (b) the total real and reactive power losses in the three-phase line, and (c) the total three-phase real and reactive power supplied at the sending end of the line. Check that the total three-phase complex power delivered by the source equals the total three-phase comp lex power absorbed by the line and loads.
Convert the wye-connected load to its delta equivalent. What is the per phase impedance of the delta equivalent load? What is the total real and total reactive power consumed by the three-phase load regardless if wye or delta?
A balanced three-phase source furnishes power to the following three loads:Load 1: 6 kVA at 0.83 power factor laggingLoad 2: unknownLoad 3: 8 kW at 0.7071 power factor leadingIf the line current is 84.6 A rms, the line voltage at the load is 208 V rms, and the combined loadhas a 0.8 power factor lagging, determine the unknown load.
A balanced three-phase source with grounded neutral has line-to-line voltages of 230 volts with ab-bc-ca sequence. It supplies power to an unbalanced three-phase delta load with impedances: Zab = 80+j60; Zbc = 60-j25; Zca = 45+j60 ohms. What is the magnitude of the line current in line a in amperes?
1. a) Find the average power dissipated in the line shown.2. b) Find the capacitive reactance that when connected in parallelwith the load will make the load look purely resistive.3. c) What is the equivalent impedance of the load in (b)?4. d) Find the average power dissipated in the line when the capacitivereactance is connected across the load.5. e) Express the power loss in (d) as a percentage of the power lossfound in (a).
vs(t) = 100sin(4t + 120°) V y=3 a)Convert the circuit to phasor medium? b)Calculate the value of equivalent impedance (Zyük) of the load.? c)Load current, active and reactive powers of the load, apparent power and power factor calculate.? d)Express the load current based on time.?
The terminal voltage of a 3-φ generator is 19053 V, line-to-line. The load draws a current of 1515 A, leading, with a phase angle of 30o. The total real power, drawn by the load would be:
A 1-phase transmission line has an impedance (4 + 3j ) Ω. Find the power factor of the load for zero voltage regulation?
16. Three star-connected impedances, Z1 = (20+ j37.7)ohm per phase are in parallel with three delta-connected impedances, Z2, (30-j159.3)ohm per phase. The line voltage is 398 V. Find the line current,power factor, power and feactive volt-amperes taken by the combination [3.37 ∠10.4; 0.984 lag: 2295 lag: 2295 W; 420 VAR.] Answer
A balanced three-phase source furnishes power to the following three loads:Load 1: 6 kVA at 0.83 pf laggingLoad 2: unknownLoad 3: 8 kW at 0.7071 pf leadingIf the line current is 84.6 A rms, the line voltage at the load is 208 V rms, and the combined load has a0.8 pf lagging, determine the unknown load.
a.) Solve for the current flowing through the load (magnitude). b.) What is the phase angle of the current flowing through the load? c.) Solve for the voltage across the load.
Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best choice for compensation, the…