An incompressible homogenous fluid is flowing steadily in a variable diameter pipe having the large and small diameters at 15 cm and 5 cm, respectively. If the velocity at a section at the 15 cm diameter portion of the pipe is 2.5 m/s, the velocity of the fluid (in m/s) at a section falling in 5 cm portion of the pipe is

An incompressible homogenous fluid is flowing steadily in a variable diameter pipe having the large and small diameters at 15 cm and 5 cm, respectively. If the velocity at a section at the 15 cm diameter portion of the pipe is 2.5 m/s, the velocity of the fluid (in m/s) at a section falling in 5 cm portion of the pipe is

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Laminar flow of a liquid through a smooth 25 mm diameter pipe has a head loss of 1 m per meter length of the pipe with mean velocity of flow at 1.5 m/s. If the flow velocity is doubled, yet remaining in laminar flow, the resulting head loss per meter length of pipe will, nearly be ReplyForward
With laminar flow in a circular pipe, at what distance from the centerline (in terms of the pipe radius) does the average velocity occur?
The cylindrical storage tank is being filled using a pipe having a diameter of 3 in. Determine the rate at which the level in the tank is rising if the flow into the tank at A is 40 gal/min. Note 1 ft3 = 7.48 gal.*
Calculate the flow rate and average velocity for a 10-inch deep flow in the 12-inch diameter corrugated metal pipe with a roughness of n = 0.028, if the pipe slope is 0.0085. CALCUATE IN FEET
A 100-mm diameter pipe is connected to a 75-mm diameter pipe. If the velocity of flow in the 100-mm pipe is 2 m/s, what is the velocity of flow in the 75-mm pipe? Determine thevolume flow rate in the 75-mm pipe.
Water discharges through an orifice on the side of a large tank. The orifice is circular in cross section and 2 inches in diameter. The jet has the same diameter. Water surface elevation is maintained at a height "h" of 12.6 ft above the center of the jet. Compute the discharge first neglecting the loss of head then considering a loss of head equal to 10 percent that of h.
Quick. A tube has a diameter of 30 inches and a roughness modulus of e equal to 1.5 * 103 feet. Find the minimum velocity that makes the flow completely turbulent
The diameter of a pipeline at point 1 is 75 mm and at point 2 is 25 mm. Points 1 and 2 are at the same elevation. The liquid (sp.gr. = 1.4) on the pipeline discharges at point 2 into the atmosphere. Compute the velocity head of the jet if the pressure head at point 1 is 50 meters of the liquid flowing, and the lost head between points 1 and 2 is 15 per cent of the velocity head at point 2.
d) discuss the differences between a full pipe flow and a partially full pipe flow.
If the velocity head at one point of a pipeline is 5 m, determine the velocity head at another point of the pipeline when the velocity is increased three times. a. 15m b. 20m c. 30m d. 45m civil engineering- hydraulics
Calculate the flow rate and average velocity for a 10-inch deep flow in the 12-inch diameter corrugated metal pipe with a roughness of n = 0.028, if the pipe slope is 0.0085.
Water from a Reservoir through a main canal is connected to a branch canal over anembankment by means of tube of 90 mm diameter. The length of pipeline up to the summit is 25 m and the total length is 65 m. Entry loss may be assumed as one-half of the velocity head in the pipe. Assume friction factor, f = 0·03. Water surface elevation in the branch canal is 10 m below that of the main canal. i) If the total quantity of water required to be conveyed is 0·06m3 /s, how many pipelines are needed for effective delivery of water ? ii) What is the maximum permissible height of the summit above the water level in the main canal so that the water pressure at summit may not fall below 20 kN/m2? iii) Explain the losses that were encounted when the water was flowing through the tube. ( absolute, the barometric reading being 10 m of water).