The walls of a furnace are made of 1.2-ft-thick concrete (k = 0.64 Btu/h·ft·°F and a = 0.023 ft2/h). Initially, the furnace and the surrounding air are in thermal equilibrium at 70°F. The furnace is then fired, and the inner surfaces of the furnace are subjected to hot gases at 1800°F with a very large heat transfer coefficient. Determine how long it will take for the temperature of the outer surface of the furnace walls to rise to 70.1°F.

The walls of a furnace are made of 1.2-ft-thick concrete (k = 0.64 Btu/h·ft·°F and a = 0.023 ft2/h). Initially, the furnace and the surrounding air are in thermal equilibrium at 70°F. The furnace is then fired, and the inner surfaces of the furnace are subjected to hot gases at 1800°F with a very large heat transfer coefficient. Determine how long it will take for the temperature of the outer surface of the furnace walls to rise to 70.1°F.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter21: Heat And The First Law Of Thermodynamics

Section: Chapter Questions

Problem 71PQ

See similar textbooks

Similar questions

During heavy exercise, the body pumps 2.00 L of blood per minute to the surface, where it is cooled by 2.00C. What is the rate of heat transfer from this forced convection alone, assuming blood has the same specific heat as water and its density is 1050kg/m3 ?
the surface area of a picnic cooler is 2.10 m^2 and it has walls constructed of a material 1.50 cm thick that has a thermal conductivity of 2.00 X 10^-2 W/(m x degrees celsius). If the temperatures inside and outside are 0.0 degress celsius and 28.5 degrees celsius, determine the rate of heat flow into the freezer and the time required to melt 2.50 kg of ice inside the cooler at 0.0 degrees celsius
A rectangular window in a home has a length of 1.5 m and a height of 0.80 m. If the window allows heat to escape from the home at a rate of 2,000 watts, how thick must the window be if the inside temperature of the home is 220 C and the outside temperature is 3.00C? (Assume that the coefficient of thermal conduction of glass is 0.80 W/mK.) a. 7.1 mm b. 124 mm c. 9.1 mm d. 8.1 mm e. 11 mm
The tube in a heat exchanger has a 2-in inner diameter and a 3-in outer diameter. The thermal conductivity of the tube material is 0.5 Btu/h·ft·°F, while the inner surface heat transfer coefficient is 50 Btu/h·ft2·°F and the outer surface heat transfer coefficient is 10 Btu/h·ft2·°F. Determine the overall heat transfer coefficients based on the outer and inner surfaces.
Consider a 20 cm thick granite wall with a thermal conductivity of 2.79 W/m·K. The temperature of the left surface is held constant at 50°C, whereas the right face is exposed to a flow of 22°C air with a convection heat transfer coefficient of 15 W/m2·K. Neglecting heat transfer by radiation, find the right wall surface temperature and the heat flux through the wall.
The north wall of an electrically heated home is 20 ft long, 10 ft high, and 1 ft thick, and is made of brick whose thermal conductivity is k = 0.42 Btu/h·ft·°F. On a certain winter night, the temperatures of the inner and the outer surfaces of the wall are measured to be at about 62°F and 25°F, respectively, for a period of 8 h. Determine (a) the rate of heat loss through the wall that night and (b) the cost of that heat loss to the home owner if the cost of electricity is $0.07/kWh.
The roof of a house consists of a 15-cm-thick concrete slab (k = 2 W/m·K) that is 15 m wide and 20 m long. The convection heat transfer coefficients on the inner and outer surfaces of the roof are 5 and 12 W/m2·K, respectively. On a clear winter night, the ambient air is reported to be at 10°C, while the night sky temperature is 100 K. The house and the interior surfaces of the wall are maintained at a constant temperature of 20°C. The emissivity of both surfaces of the concrete roof is 0.9. Considering both radiation and convection heat transfers, determine the rate of heat transfer through the roof, and the inner surface temperature of the roof. If the house is heated by a furnace burning natural gas with an efficiency of 80 percent, and the price of natural gas is $1.20/ therm (1 therm = 105,500 kJ of energy content), determine the money lost through the roof that night during a 14-h period.
A metal rod is 10 cm long and has a diameter of 2 cm one end is in contact with steam at 100 deg C while the other end contacts a block of ice at 0 deg C. The cylindrical surface of the rod is carefully insulated so heat flows only from one end to end. In a time of 20 minutes, 320 grams of ice melts. What is the thermal conductivity of the metal?
A glass window in a home is 0.62cm thick and has dimensions of 1 m x 2 m. On a certain day, the temperature of the interior surface of the glass is 25ºC and the exterior surface temperature is 0ºC. The rate at which energy is transferred by heat through the glass is __ W (hint: k for glass is 0.8 J/msºC, answer in watts ) The energy transferred through the window in one day, assuming the temperatures on the surfaces remain constant, is __ J.
A series of composite wall of a furnace consists of 20cm of firebrick, 15cm of a high temperature insulating material, 12cm of ordinary brick, and lastly, 8mm of asbestos cement board. The inside of the furnace wall is 100C. Determine the heat transfer through the wall per m². Firebrick k=1.4W/m-K High temperature insulation k = 0.22 W/m-K Ordinary brick k = 0.90 W/m-K Asbestos k = 0.39 W/m-K
Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially that of the surrounding air, i.e., 20°C. Its width is 5.0 cm; thickness is 1.0 mm; thermal conductivity is 200 W/m·K; and base temperature is 40°C. The heat transfer coefficient is 20 W/m2·K. Estimate the fin temperature at a distance of 5.0 cm from the base and the rate of heat loss from the entire fin.
Consider a flat-plate solar collector placed on the roof of a house. The temperatures at the inner and outer surfaces of the glass cover are measured to be 33°C and 31°C, respectively. The glass cover has a surface area of 2.5 m2, a thickness of 0.6 cm, and a thermal conductivity of 0.7 W/m·K. Heat is lost from the outer surface of the cover by convection and radiation with a convection heat transfer coefficient of 10 W/m2·K and an ambient temperature of 15°C. Determine the fraction of heat lost from the glass cover by radiation.