The working fluid in a machine operating in a cycle experiences the following steps: A to B: Heat added at constant volume, V1 producing a pressure rise from P1 to P2 B to C: Heat added at constant pressure and the volume rises from to V2 C to D: Heat removed at constant volume and the pressure returns to P1 D to A: Heat removed at constant pressure and volume returns to V1 Sketch and label this cycle on a graph of pressure as a function of volume. What type of device would the machine be when it operates clockwise around the cycle described 3. above? And, when it operates anti-clockwise around the same cycle?

The working fluid in a machine operating in a cycle experiences the following steps: A to B: Heat added at constant volume, V1 producing a pressure rise from P1 to P2 B to C: Heat added at constant pressure and the volume rises from to V2 C to D: Heat removed at constant volume and the pressure returns to P1 D to A: Heat removed at constant pressure and volume returns to V1 Sketch and label this cycle on a graph of pressure as a function of volume. What type of device would the machine be when it operates clockwise around the cycle described 3. above? And, when it operates anti-clockwise around the same cycle?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.22P: 1.22 In order to prevent frostbite to skiers on chair lifts, the weather report at most ski areas...

See similar textbooks

Similar questions

Suppose we got the following data during a test of a 2- stroke engine in which gas is usedas a fuel:Diameter of the piston = 149 mmStroke length = 179 mmClearance volume = 0.88 literrpm of the engine = 302Indicated mean effective pressure = 6.0 barGas consumption = 6.0 m3/hCalorific value of the gas (fuel) = 16990 kJ/m3Make a clear sketch the geometry of this engine using the data and determine thefollowing:i. Indicated power developed by the engine in watt.ii. Air Standard Efficiencyiii. Indicated thermal efficiency of the engine.
1. Energy consumption in a country from 2001 to 2011 increased from 1041.3 million to 1526.1 million BOE (barrels of oil equivalent). If the high calorific value (HHV) of the oil is 141,000 kJ/gallon what is the increase in energy consumption over 10 years in Joule units. What is the rate of energy consumption per year? 2. Based on data on the rate of energy consumption per year from question no. 1, if the growth rate energy 2.5% per year, calculate the doubling time (td) and what is the approximate rate of energy growth in 2021.
The ideal gas law relates the pressure P, volume V, absolute temperature T (Kelvin), and amount of gas n. The law is P = mAT where R is the gas constant. An engineer must design a large natural gas storage tank to be expandable to maintain the pressure constant at 2.2 atmospheres. In December when the temperature is -15°C, the volume of gas in the tank is 28,500 ft°. What will the volume of the same quantity of gas be in July when the temperature is 31°C? (Hint: Use the fact that n, R, and P are constant in this problem. Note also that Kelvin = °C+273.2)
Completely solve and box the final answers. Write legibly 4. A single stage air compressor handles 30 cubic meter per minute of atmospheric pressure, 30°C air and delivers it to a receiver at 3.0 mpa. Its volumetric efficiency is 83.0%, compression efficiency of 83.0% and mechanical efficiency of 80.30%. If it rotates at 300 rpm, what power in kW is required to drive it?
THERMODYNAMICS: Mollier Diagram: Steam Table Using the Steam Table below, find Δhf and Δhg in BTU/lbm and Δsf and Δsg in kJ/kgm-K and for the following parameters: P1 = 9.5 kgf/cm2 P2 = 15 kgf/cm2 With step by step explanation pls NOTE: This table uses SI unit as stated below: Pressure: MPa Temperature: °C Internal Energy and Enthalpy: kJ/kgm Entropy: kJ/kgm-K
Given that a particular gas has the following data:• pressure is 101.325 kPa,• temperature is 16°C, and• volume is 2.83 m³and these are compressed into a storage vessel of 0.31 m³ capacity.Before admittance, the storage vessel contained the gas has the following data:• pressure is 137.8 kPa, and• temperature is at 24°C.After admittance, the pressure has risen to 1171.8 kPa.Determine the final temperature of the gas in the vessel (in Kelvin)
5. (a) Describe a platinum resistance thermometer. How would you calibrate and use it formeasuring temperature of an object. Mention its advantages over a thermoelectricthermometer. (Please include all the necessary and clear diagrams). (b) Discuss the second law of thermodynamics, entropy, and the principle of increase ofentropy. Show that the entropy of a reversible process remains invariant and it gets increasedin an irreversible process. (Please include all the necessary and clear diagrams).
The differential change in pressure p close to the surface of a static fluid is given by the following expression:dp/dy = -3Ap2,where A is a constant, with units of 1/(atm•m), and p is the pressure in atm. The pressure at the surface of the fluid is p(0) = 1 atm, and the coordinate y here is positive upwards with origin at the surface. An absulute pressure gauge is placed at a depth 0.19m in the fluid. What would be the reading of the pressure gauge in units in atm? you can take the constant A=1(atm.m)^-1
The Ideal gas law shows the relationship between some common properties of ideal gases and is written as PV = nRT. P = pressure, V = volume, n = number of moles of ideal Gas, R = General gas constant = 8.314 kJ/(kmol.K) and T = absolute temperature. 5 mol ideal gas at 22°C is placed in a cube with edge lengths of 0.750 meters. Calculate the pressure of the Ideal gas as [Pa].
Latent heat of fusion is the heat given up as a substance freezes. The latentheat of fusion for water is 144 British thermal units per pound (Btu/lb). Thismeans that 144 Btu are given up for each pound of water that freezes. Howmany British thermal units of heat are given up when 4,000 pounds of waterfreeze?
Nitrogen gas is confined in a cylinder and the pressure of the gas is maintained by a weight placed on the piston. The mass of the piston and the weight together is 200 lb. The acceleration due to gravity is 9.81 m/s?, the atmospheric pressure is one standard atmosphere and the friction diameter is 4 in. Assuming the piston is frictionless, determine the pressure of the gas in inches Hg. a. 46.10 c. 78.54 7. The molar composition of a gas is 10% H2, 10% O2, 30% CO2 and balance H2O. If 50% H20 condenses, the final mole percent of H2 in b. 22.65 d. 38.59
Krypton in a closed system is compressed adiabatically from 94 K and 1 bar to a final pressure of 24 bar. Compute the required work. Assume krypton is an ideal gas. From Appendix B in the text, we can assume the heat capacity of krypton is independent of temperature and CP=2.5R , where R is the molar gas constant R=8.314 J/(mol K). For an ideal gas, recall CV=CP−R=1.5R. Report your answer in units of kJ/mol using three decimal places.