thermodynamics Describe the operation of thermodynamics systems and their properties and explain the application of the first law of thermodynamics to appropriate systems given in the figure 1.2. At the end explain the relationships between system constants R, Cv, and Cp for a perfect gas where a perfect gas has a molar mass of 26kg/k mole and value of gamma is 1.26.

thermodynamics Describe the operation of thermodynamics systems and their properties and explain the application of the first law of thermodynamics to appropriate systems given in the figure 1.2. At the end explain the relationships between system constants R, Cv, and Cp for a perfect gas where a perfect gas has a molar mass of 26kg/k mole and value of gamma is 1.26.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.8P

See similar textbooks

Similar questions

There are two double-acting pneumatic actuators, the extension of each one is executed in 5 seconds at 80 psi and recoil in 4 seconds at 30 psi, the travel of both is 12 inches, the diameter of the piston is dp = 4 "and of the rod dv = 1"a) Determine the compression ratios. The local atmospheric pressure is 79kpa = (11.5 psi)b) Determine the air consumption in cubic feet per minute of free air PCMc) Determine the average air consumption for each.d) Propose the regulation values of the pressure switch, system pressure and safety valve
3. A 6 in x 20 ft uninsulated B.I pipe conveys steam at 385 °F with an average ambient temperature of 85°F. if the cost of the fuel is PhP 250.00 per 106 BTU with the net energy conversion efficiency of 75%, what is the annual cost of the heat lost? For 6 in. pipe schedule 80:Do = 6.625 inDi = 5.761 in For iron:k = 30 BTU/ hr ft °F for the surface coefficients:hi = 1000BTU/ hr ft2°F ho = 2 BTU/hr ft2 °F
SUMMARIZED IN YOUR OWN WORDS THE RELEVANCE OF IST AND SECOND LAW OF THERMODYNAMICS IN YOUR CAREER AS A CIVIL ENGINEER
The diameter of an air compressor cylinder is 140 mm, the stroke of the piston is 180 mm, and the clearance volume is 77 cm². The pressure and temperature of the air in the cylinder at the end of the suction stroke and beginning of compression is 0.97 bar and 13°C. The delivery pressure is constant at 4.2 bar. Taking the law of compression as PV1.3 = C, calculate the volume of air delivered per stroke in liters.
An engine cylinder is 127mm in diameter, and the piston stroke is 508mm long, the clearance volume is 0.001m3, and the pressure constant is 735kPa. What is the work done in the cylinder during a single stroke? A) 3.995 kJ B) 2.530 kJ C) 8.576 kJ D) 5.287 kJ
A certain gas with Cp= 0.529 BTU/lbmole-Rankine and Cv= 0.4053 BTU/lbmole-Rankine expands from 20ft3 and 500 Rankine to 30 ft3 and 1620 Rankine its pressure remains constant at 40lbf/ in2 . R(gas constant)=97.24 ft3 -lbf/lbmole-Rankine Compute: a) Change of internal energy (BTU) b) Change of enthalpy (BTU) c) Heat Transferred (BTU)
Question 1 0.2804 kg of nitrogen, originally in a cylinder at 200 kPa and 32 oC, is to be compressed polytropically (PVn = C) to a final pressure of 1380 kPa. The volume compression ratio is 5:1. For nitrogen, R = 297 J/kg.K and  = 1.41. Calculate:(a) The value of the index n(b) The work done during compression(c) The change in internal energy(d) The change in entrop
Schmedrick takes his dune buggy to the gas station and fills it up to the very brim. His tank is a steel cylinder of radius 23 cm and height 45 cm (big enough to hold about 20 gallons). He burns a liter of gas getting to the beach, where both the tank and the gas heat up by 20 ºC. Both the tank and the gas expand. For steel α = 1.1 · 10-5 / ºC. For gasoline β = 9.6 · 10-4 / ºC. Does the tank overflow? Calculate the volume of gasoline at the beach before expansion. (1 cm 3 = 1 mL): Use the volume expansion formula to calculate the increase in volume of the gasoline: Conclusion:
solve only the last part. the part E solutions of part A to D are: part A is solved in figure. b - Thermal efficiency. Cv for pump P1 ; Wp2 = h2 - h1 = V1 (P2 - P1) = 0.00101 (800-10) = 0.798 KJ/KG h2 = h1 + Wp1 = 191.81 + 0.798 = 192.61 KJ/KG Cv for feedwater heater ; x = m6 / mtotal ( extraction factor ) (1-x)h2 + xh6 = 1 h3 x = h3 - h2 / h6 - h2 = (721.1 - 192.61)/(2891.6 - 192.61) = 0.1958 ; Cv for pump P2 ; Wp2 = h4 - h3 = V3 (P4 - P3) ; = 0.001115 (3000 - 800) = 2.45 KJ/KG h4 = h3 + Wp2 = 721.1 + 2.45 = 723.55 KJ/KG Cv for Boiler ; qH = h5 - h4 = 3230.82 - 723.55 = 2507.3 KJ/KG CV for turbine ; 2nd law, S7 = S6 = S5 = 6.9211 KJ/KG P6, S6 = h6 = 2891.6 KJ/KG (super heated steam) S7 = S6 = S5 = 6.9211 x7 = (6.9211 - 0.6492)/7.501 = 0.83614 h7 = 191.81 + x7 (2392.82) = 2192.55 KJ/KG Turbine has full flow in HP section and fraction 1-x in LP section; Wt / m5 = h5 - h6 + (1-x)(h6-h7) Wt = 899.3 KJ/KG P2 has the full flow and P1 has the 1-x fraction of the flow; Wnet = Wt -…
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: 5. The total draft, feet of air. 6. The height of the Chimney, feet
( See I have Attached Solution Too ,That I have recieved Earlier but It seems to be Wrong , I think W =P(Vs+Vc) Can anybody Clarify it.) An engine cylinder is 127mm in diameter, and the piston stroke is 508mm long, the clearance volume is 0.001m3, and the pressure constant is 735kPa. What is the work done in the cylinder during a single stroke? A) 3.995 kJ B) 2.530 kJ C) 8.576 kJ D) 5.287 kJ
Please prove this problem, the answers Tb,Wt,Wr are already given, writtem in BOLD