Three inductive loads, each of resistance 3Ω and reactance 7Ω are connected in delta. When connected to a 3-phase supply the loads consume 1.6 kW. Calculate (a) The phase angle (b) Power factor of the load, (c) Phase voltage (d) Line voltage(e) Phase current

Three inductive loads, each of resistance 3Ω and reactance 7Ω are connected in delta. When connected to a 3-phase supply the loads consume 1.6 kW. Calculate (a) The phase angle (b) Power factor of the load, (c) Phase voltage (d) Line voltage(e) Phase current

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.28P: Three loads are connected in parallel across a single-phase source voltage of 240V(RMS). Load 1...

See similar textbooks

Related questions

Q: Two wattmeters connected to measure the input to a balanced three-phase circuit indicate +2500 W and…

A: Given: Readings of the two wattmeter W1=2500 WW2=500 W

Q: Three inductive loads, each of resistance 4Ω and reactance 9Ω are connected in delta. When connected…

A: Resistor is passive element it oppose the flow of current. Inductor is also passive component it…

Q: QUESTION 1 A single-phase circuit is depicted in the following Figure 1. The supply voltage is 240V…

Q: In the diagram below, let The interconnector has an impedance of X-Ω/phase be X =0.33 + 0.34j…

Q: 2. What are the voltages per phase of a delta-connected source that delivers an 0.85 power factor…

Q: In an industrial facility, all loads are 3-phase and their voltage is 400 V. Main 150 kW motor, 80…

A: Total power = Sum of powers of motor, dan and oven. Reactive power =Active power ×tan(Power factor…

Q: A balanced 3 phase delta connected load draws power from a 435 V supply. The two wattmeter connected…

A: Given, VL=435 V W1=6.4 KW W2=-0.2 KW

Q: Q3:- A balanced Y-connected source with Van 110/15° Vrms is connected to a A-connected balanced load…

A: Given Data: Load impedance = 10 + j5 Phase voltage Van = 110∠15 Vrms

Q: 1. A wye connected load has a 5 < 20° ohm impedance per phase and is connected across a 120 V three…

Q: Each phase of a delta-connected load comprises a resistor of 50 ohms and a capacitor of 50…

A: In this question we have given delta connected load....We have to find out line current , phase…

Q: A three-phase overhead transmission line delivers 500kW at 33kV.The current flowing through the…

A: Cos of angle between voltage and current is power factor .

Q: A three-phase star connected balanced load consumes 75 watts of power from a 440 V supply. If the…

A: By using the power relation in delta and star Pdelta =3*Pstar P star = 75 watt then P delta =…

Q: e-phase AC parallel circuit, the voltage applied to loads is 300 /0° V. The load impedances are…

Q: The secondary is connected to a load of 502. Calculate the primary and secondary side impedances,…

Q: A 440 V three phase supply is connected to three star connected loads in parallel. The loads are as…

Q: A delta connected, balanced 3-phase load is connected to a 3-phase, 120 V power supply. If the phase…

Q: For the given circuit calculate the maximum power that can be transferred from the circuit to the…

Q: Analyze the circuit supplied by V, = 240Z5°V in Figure 2(a). (i) Compute the total impedance of…

A: In this question we will find total impedance , current flow and voltage across all elements.... As…

Q: A three-phase delta connected balanced load consumes 66 watt of power from a 415 V supply. If the…

Q: A 240 Volt 60cycle source is connected to a coil of wire that has a resistance of 75Ω and an…

Q: Three resistors 10, 15, and 20 ohms are connected in Y-configuration to a balanced 208 V 3-phase…

Q: A balanced 3 phase star connected load draws power from a 420 V supply. Two wattmeter's indicate…

A: The complex power in an AC system is defined as the product of rms value of applied voltage and…

Q: C. 70 µF n. -- r 5. A delta-connected load draws 17.28 kW from 240 V, balanced three-phase supply.…

Q: Three colls, each of resistance 6 ohms and inductive reactance 8 ohms are joined in delta across 400…

A: In this question , we will find currents in windings..

Q: Wa balanced 3 phase supply is provided to a pure resistive load, the current is in phase with the…

A: Given Wa balanced 3 phase supply is provided to a pure resistive load, the current is in phase with…

Q: 2. Using Loop Analysis by applying KVL, find the current through all the resistors in the given…

Q: Q3:- A balanced Y-connected source with Van = 110/15° Vrms is connected to a A-connected balanced…

A: Given Parameters are: The Load Impedance is: ZΔ=(10+j5)Ω Phase Voltage of Y-connected source:…

Q: A 415 V, 56 Hz 3-phase supply is connected to a 3-phase star connected balanced R-L load each of…

Q: Two balanced Y – connected loads A and B are connected across a threephase 3-wire balanced system.…

A: In this question, We need to determine the current in the load A. If two loads are connected in…

Q: A delta connected three phase load is connected to a 560 V line. The loads have an impendance of 14…

Q: 4 For the circuit shown, the total current is . and the phase difference .2 . is 42 422 L, 220 U

A: Nodal Analysis - It is used to find node voltage using Kirchhoff's current law. Kirchhoff's current…

Q: A 380 V system as shown below, obtain the line currents and phase voltages * 1j 3+2j 2-3j 1-4j 1 j 1…

Q: Given a variable resistor R of unknown resistance connected in parallel with an inductive reactance…

Q: 1. In a two-element series circuit, the applied voltage and the resulting current are respectively…

A: Given: For two-element circuit, voltage has a dc term and a sinusoidal term and current has an…

Q: What is the current in each phase of a balanced delta-connected resistive load when the line current…

A: In this question we will find phase current in delta connection....

Q: 4 = 80 X 10 sin wi ir = 120 x 10 sin (wt + 60°)|

Q: In Figure 2, arrangement is shown for a voltage supply of 410V. For xyz sequence assume that Vw = V,…

A: The phase sequence is xyz, considering Vxy as reference voltage, Vxy=410∠0° VVyz=410∠-120°…

Q: An impedance of (10 +j15) Nis connected in parallel with an impedance of (6 -j8)N The total current…

Q: 2 mH A 16 Ω ww o ell 100/0° V 10 2 mH B 133 µF 100/120° V b N 100/–120° V с 27 mH ww o 1Ω 2 mH A…

A: In the 3 phase unbalanced load supplied by The balance load. Find the current Iab And IbB

Q: A balanced load connected to a three-phase supply comprises three identical coils in star. The line…

A: Balance load connected to balance supply The line current IL = 25A KVA input = 20KVA KW input =…

Q: 400/200 v.i phase transforer is supplying a load of 25 a at p.f of 0.866 lagging .on no load the…

A: 400/200 V single phase transformer is supplying a load of 25A at Pf of 0.866 lagging . I2=25A;…

Q: A 415 V, 58 Hz 3-phase supply is connected to a 3-phase star connecter load each of resistance 17…

Q: Three identical loads having an impedance of (8.66 + j5) are connected in wye across a balanced…

A: Given: Impedance, Z=(8.66 + j5)Ω Line voltage, VL=330V

Q: A three phase system has a supply voltage of 440v, current supplied 120A and a power factor angle of…

A: Given data: Vs=440 V Is=120 V θ=5o Solution: Reactive power is obtained by the below formula,…

Q: Two wattmeters are connected to measure power input to a thrce phase balanced circuit indicate 7 kW…

Q: 1. In a two-element series circuit, the applied voltage and the resulting current are respectively…

A: According to the policy attempting only the first question, As it is two element series circuit so…

Q: Three non-inductive resistances, each of 100 Q, are connected in star to a three- phase, 440-V…

Q: Three impedances of 3 + j 4 Ω are connected in delta with a three phase, 500 volt, a.c. supply. Then…

Concept explainers

Single Phase AC Circuit

Alternating Current (AC) is a type of electric power in which the electric current changes, both in magnitude and direction, at regular intervals. This AC Circuits can deliver power in either a Single Phase system or a Three Phase system.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Analysis of Single Phase and Three Phase System

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Each phase of delta connected load comprises a resistor of 50 ohm and a series capacitor of 50 µF. Calculate the line and phase currents when the load is connected to a 440 V, 3 phase, 50 Hz supply
A 3 phase 600 V balanced system supplies energy to an unbalanced delta connected load. The three line currents Ia, Ib and Ic are 141.4 A, 100 A and 100A respectively. A wattmeter with its current coil in line a and potential coil across a and b indicates 84.84 kW. Solve for the total power drawn by the load. Assume a sequence of a-b-c.
A 3-phase load consists of three similar inductive coils, each of resistance 50Ω and inductance 0.3 H. The supply is 415 V, 50 Hz, Calculate (a) the line current (b) the power factor and (c) the total power when the load is (i) star-connected and (ii) delta-connected.
In a balanced delta connected 3-phase circuit , has resistance 25 ohm and inductive reaction 40 ohm , connected to a 400V , 50Hz 3 phase supply voltage , then total power delivered to load is Select one : a. 1635.34KW b. 7593.26W C. NONE OF THESE d . 5397.76W
Three resistors 10, 15, and 20 ohms are connected in Y-configuration to a balanced 208 V 3-phase supply. Calculate the total power of the system.
Three impedances of 3 + j 4 Ω are connected in delta with a three phase, 500 volt, a.c. supply. Then find (1) phase current (2) line current (3) power factor (4) total active power consumed and (5) power consumed by each phase.
Refer to Figure 1. A Y-connected source supplies 3 balanced 3-phase loads. The source has voltage Vab=380∠0 V. Frequency = 60Hz Type of load, Delta
Three inductive loads each of resistance 75Ω and inductance 318.4mH are connected in delta to a 415V, 50 Hz, 3-phase supply. Determine (a) the phase voltage, (b) the phase current, and (c) the line current. [(a) 415V (b) 3.32A (c) 5.75A]
In a specially designed three-phase water heater there are three resistances of 150.0 each. Water heater is connected to mains voltage 850 V. a) Determine the phase voltage b) Determine the effect developed in the whole water heater in case of Y-connection. c) Determine the power developed in the entire water heater at D connection.
Three inductive loads, each of resistance 4Ω and reactance 9Ω are connected in delta. When connected to a 3-phase supply the loadsconsume 1.2kW. Calculate (a) the power factor of the load, (b) thephase current, (c) the line current and (d) the supply voltage.
In the diagram below, let The interconnector has an impedance of X-Ω/phase be X =0.33 + 0.34j Correct every question to two decimal places : (b) Open circuit bc and determine the following parameters by applying Thevenin’s theorem:32.Ian (A) and it's angle 33 Vac (V) and it's angle 34.Vab (V) and it's angle
Two parallel connected loads A and B are supplied by a 440 V line to line, 3-phase, 60 Hz generator. Load A draws an apparent power of 100 kVA at 0.80 pf lagging and load B draws an apparent power of 70 kVA at unity pf. Determine the line current supplied by the source.