To determine the BOD5 of a waste water sample, 5, 10 and 50 ml aliquots of the waste water were diluted to 300 ml and incubated at 20°C in BOD bottles for 5 days. Sl. No. Waste water Initial DO, volume mg/l 5 9.2 10 9.1 50 8.4 Based on the data, the average BOD5 of the wastewater is equal to 1. 2. 3. DO after 5 days, mg/l 6.9 4.4 0.0

To determine the BOD5 of a waste water sample, 5, 10 and 50 ml aliquots of the waste water were diluted to 300 ml and incubated at 20°C in BOD bottles for 5 days. Sl. No. Waste water Initial DO, volume mg/l 5 9.2 10 9.1 50 8.4 Based on the data, the average BOD5 of the wastewater is equal to 1. 2. 3. DO after 5 days, mg/l 6.9 4.4 0.0

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Plz, solve what you have been asked in this problem by giving detail information. Environmental Engineering-2 Determine the Aeration Basin Dimensions for a town of 30,000 population. Mixed Liquor Suspended Solids is 3000 mg/L. The BOD Loading rate is 0.48 kg/ (?3 –day), Sludge Volume Index is 100 mL/g; Return sludge is 40%; the concentration of BOD is 0.091 Kg/(Capita –day). Primary sedimentation tank remove 40% of BOD.
A waste with a 5-day BOD (BOD)=200mg/L and k = 0.1 day¹ is discharged to a river at a rate of 1 m/s. The river has flow rate of 9 m/s and a background ultimate BOD (Lo) of 2 mg/L upstream of the discharge. (a) Calculate the ultimate BOD (Le) of the waste. (b) Furthermore, assuming instantaneous mixing after discharge, calculate Lo of the river water after it has received the waste. Ans.: (a) Ultimate BOD of wastewater = 508.3 mg/L, (b) Ultimate BOD of river water after discharge of waste-52.63 mg/L.
A conventional activated-sludge system treats 11,000 m3/day of wastewaterin an aeration tank with a volume of 3400 m3. The BOD after primary clarification is 180mg/l. Given the operation conditions below, calculate the sludge residence timeMLVSS in the rector = 2,100 mg/lMLSS = (1.25)*MLVSSQw = 160 m3/daySVI = 125 mL/g (Ans. SRT = 7.0 days)
Read the question carefully and give me right solution according to the question. Determine the diameter of a trickling filter for a wastewater flowing at the rate of 12900 m3/day. The influent BOD (So) concentration for the wastewater is 129000 mg/l, whereas desirable effluent BOD should be as per NEQS.
15 mL of raw wastewater wasadded into a 300-mL BOD bottle, which was then filled up with 285 mL pure water. The DO concentration in the mixed sample before incubation is 7.8 mg/L. The sample wasincubated for 5 days and the final DO wasfound to be 2.4 mg/L. What is theBOD5of the raw wastewater?
A 8.5 ml of sample of wastewater is diluted to 300 ml with distilled water in standard biochemical oxygen demand bottle dissolved oxygen were initial 9.2 mg/l 3 days 8.7 mg/l and after 5 days 6.4 mg/l at 20 c determine the biochemical oxygen demand for three and five days of the wastewater then compute the ultimate BOD assume k=0.12/d
A waste treatment lagoon having 3 cells, each 115,000 m2 in area, a minimum operating depth of 0.6 m, and a maximum operating depth of 1.5 m, receives 1,900 m3/d of wastewater having an average BOD5 of 122 mg/L. What is the BOD5 loading and detention time? The following data applies: the slope of the lagoon walls is disregarded in the calculations. a. 6.7 kg/ha-d, 54.5 daysb. 20.2 kg/ha-d, 163.4 daysc. 18.5 kg/ha-d, 177.6 daysd. 18.5 kg/ha-d, 54.5 dayse. None of these
QUESTION: An aerated lagoon wastewater treatment is to be designed for a municipal wastewater. The design population is 5000 persons, and the aerated lagoon is to provide secondary treatment. Pertinent data are: flow = 380 L/cap-d, influent BOD5 = 255 mg/L; effluent BOD5 = 20 mg/L, K = 2.18 d-1 oxygen required 1.6 kg O2/kg BOD5 applied to the lagoons, and the primary clarifier removes 33 % of the influent BOD5. Calculate the total lagoon volume (m3)
A 15-mL sample of sewage is mixed with enough dilution water to fill a 300 mL BOD bottle. The bottle has an initial DO of 8.5 mg/L. At the end of 5 days, meausured DO is 2.8 mg/L. Calculate BOD5 of the sewage.
Question 1: You have been assigned to design primary clarifiers for a wastewater treatment plant. The average flow rate of the wastewater is 256000 m3/day with a BOD5 of 120 mg/L and suspended solids concentration of 300 mg/L. The goal is to remove 35% BOD5 and 60% suspended solids in primary treatment. Determine the following: 1) The diameter of the primary clarifier for a surface overflow rate of 50 m3/m2-day.2) The detention time in the primary clarifier and the mass of solids removed in kg/day.Assume a depth of 4m.
For an activated sludge basin with a flow rate of 500 L/s if the influent BOD5 = 100 mg/L, the MLVSS = 3000 mg/L and the volume of the aeration basin = 766100 gallons Find the F/M ratio If the WAS X= 10000 mg/L, find the WAS flowrate (m3/d)
A BOD test is to be run on a sample of wastewater that has a 5 day BOD of 210 mg/L. The intial dissolved oxygen, DO of a mix of distilled water and wastewater is 7.9 mg/L. Roughly what is the maximum volume of wastewater should you put in the bottle if you want to have at least 2.0 mg/L of DO remaining at the end of 5 days?