Two shunt generators are operating in parallel and taking equal shares of a 2400 A, 230-V load. The ratings of the generators are as follows: Machine Parameters Regulation (%) Rated Power (kW) Rated Voltage (V) Generator 1 3 500 250 Generator 2 4 600 250 If an additional load of 600-A is connected to the bus, determine the current delivered by each generator at this condition

Two shunt generators are operating in parallel and taking equal shares of a 2400 A, 230-V load. The ratings of the generators are as follows: Machine Parameters Regulation (%) Rated Power (kW) Rated Voltage (V) Generator 1 3 500 250 Generator 2 4 600 250 If an additional load of 600-A is connected to the bus, determine the current delivered by each generator at this condition

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter6: Power Flows

Section: Chapter Questions

Problem 6.48P

See similar textbooks

Similar questions

1. Two shunt generators operating in parallel delivering a total load current of 240 A. One of the generators is rated 50 KW and the other 100 KW. The voltage rating of both machines is 500 V and have regulations of 4% and 6% respectively. Assuming linear characteristics, determine (I) the current delivered by each machine (ii) terminal voltage.
Two shunt generators operating in parallel delivering a total load current of 240 A. One of the generators is rated 50 KW and the other 100 KW. The voltage rating of both machines is 500 V and have regulations of 4% and 6% respectively. Assuming linear characteristics, determine (i)the current delivered by each machine (ii) terminal voltage.
Two shunt generators are operating in parallel and taking equal shares of a 2400 A, 230 V bus load. The ratings of the generator are as follows: Generator 1: %VR is 3%, rated power is 500 kW, rated voltage 250 V. Generator 2: %VRis 4%, rated power 600 kW and rated voltage 250 V. If an additional 600 A load is connected to the bus, determine the current delivered by each generator at this condition
Energy Question-1) Three identical synchronous generators were connected in parallel and the idle frequency values of each generator were set to 54 Hz. The frequency - power characteristic slopes of the first and second generators are 5.3 MW/Hz and the slope of the third generator is 3.9 MW/Hz. When these three identical synchronous generators feed a load together, the system frequency becomes f=51.7 Hz. According to this;a-) Calculate the active power value that the first generator will provide to the load.b-) Find the active power that the second generator will provide to the load.c-) Find the active power that the third generator will provide to the load.d-) Calculate the power of the load.(All values in options a, b, c, and d in this Question will be entered as two digits after the comma.) NOTE: If the information in the text and the photo is different, please solve the question using the information given in the photo. Help me please... Thank you so much.
2.) A 60-MVA, 69.3 kV, 3-phase synchronous generator has a synchronous reactance of 15 ohms per phase and negligible resistance. The generator is delivering rated power at 0.8 pf leading at rated terminal voltage to an infinite bus bar. Determine the magnitude of the power angle. Subject Electrical machine 2
A 50 MVA, 3-phase, 31.2-KV, 0.85- PF-lagging, 50-Hz, 4-pole, Y- connected steam-turbine generator has a synchronous reactance of 10 per-phase, and a negligible armature resistance. This generator is connected to operate in parallel with a large power system (infinite bus). The generator is operating at constant field current with EA = 24.5 KV and 8 = %3D 35°. Find the armature current, and the corresponding power factor. Select one: O a. lA = 1420.2 A , PF = 0.99 %3D lagging O b. IA = 1420.2 A , PF = 0.99 %3D leading O c. IA = 902.1 A , PF = 0.14 leading d. None O e. lA = 902.1 A , PF = 0.85 lagging %3D
A 20 kW COMPOUND GENERATOR WORKS ON FULL LOAD WITH TERMINAL VOLTAGE OF 250V. THE ARMATURE, SERIES AND SHUNT WINDINGS HAVE RESISTANCES OF 0.05 OHM, 0.025 OHM, AND 100 OHMS, RESPECTIVELY. IF THE MACHINE IS CONNECTED SHORT SHUNT, FIND THE EMF GENERATED.
A three phase, 50 Hz, 4800V, 6 pole Y-connected synchronous generator connected to an infinite bus (constant voltage at 4800V) and has synchronous reactance of 20Ω per phase and negligible armature resistance. The generator is delivering 1 MW at a power angle of 30 degrees.. Calculate the following:1. Output torque of the generator2. Excitation voltage Ea3. Armature current4. Power factor5. Reactive power delivered
A 25 MVA, 24.25 kV, 50 Hz, 4 poles, Y- connected synchronous generator has a synchronous reactance of 9 Ω and armature resistance of 0.5 Ω. At 60 Hz, the total mechanical losses are 2 MW. The no-load saturation curve giving the relationship between output phase voltage, Eo and excitation current Ix is shown in the picture. If the excitation is adjusted so that the terminal line voltage remains fixed at 24.25 kV, calculate the following: (i) Exciting field current required at no-load. (ii) Required exciting field current for 20 MW of connected load with 0.8 power factor lagging (iii) Efficiency of the generator at condition (ii) (iv) Input torque of generator (v) Explain why this kind of electrical machine commonly used in power generation?
3-phase 9kVA power 60 Hz 208 Volt 8-pole synchronous generator winding resistance is negligible, synchronous reactance is j8 ohms per phase. The generator was first connected in parallel with a 3-phase 60 Hz, 208 V generator. If the excitation current increases by 25% without changing the drive power, find the stator winding current per phase, the power coefficient (cosφ) and the reactive power provided by the generator.
Two shunt generators are connected in parallel to supply a common load. Generator A has a power rating of 150KW and a voltage of 230 volt. Generator B has a rating of 250KW, 230 volts. Both generators has a no-load voltage 250 volts. Determine 1.) the power deliverd by each generator if the terminal value is 240V 2.) the total power received by the load
A 40 MVA, 24-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3- phase, steam-turbine generator has a synchronous reactance of 10 per- phase, and a negligible armature resistance. The field current is adjusted for 26-KV generator output line voltage at no load. This generator is connected to operate in parallel with a large power system (infinite bus). If the field current is unchanged, determine the absolute maximum output power of this generator. Select one: a. Pout, max = 187.2 MW b. Pout, max = 108 MW O c. Pout, max = 62.4 MW %3D O d. None