Two shunt generators operating in parallel delivering a total load current of 240 A. One of the generators is rated 50 KW and the other 100 KW. The voltage rating of both machines is 500 V and have regulations of 4% and 6% respectively. Assuming linear characteristics, determine (i)the current delivered by each machine (ii) terminal voltage.

Two shunt generators operating in parallel delivering a total load current of 240 A. One of the generators is rated 50 KW and the other 100 KW. The voltage rating of both machines is 500 V and have regulations of 4% and 6% respectively. Assuming linear characteristics, determine (i)the current delivered by each machine (ii) terminal voltage.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

1. Two shunt generators operating in parallel delivering a total load current of 240 A. One of the generators is rated 50 KW and the other 100 KW. The voltage rating of both machines is 500 V and have regulations of 4% and 6% respectively. Assuming linear characteristics, determine (I) the current delivered by each machine (ii) terminal voltage.
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
A long shunt compound DC generator delivers a load current of 150A at 230V and has armature, series field and shunt field resistances of 0.032, 0.015 and 92Ωrespectively. Calculate (i) induced emf (ii) total power generated and (iii) distribution of this power (iv) voltage regulation
111/ The armature reaction of the DC generator reduces the generated EMF. Select one: True False
(a) A short shunt cumulative compound dc generator supplies 6kW at 235V. The Shunt field resistance, Series field resistance and Armature resistances are 8012, 0.192 and 0.22 respectively. Calculate the induced emf and load resistance.
Compare and contrast a cumulative compound DC generator and a differential compound DC generator in terms of performance. Note: Explain in no more than 70 words
The armature winding resistance of a long shunt connected DC generator is 0.4ohm, the resistances of the shunt and serial field windings are 125 ohms and 0.1 ohms, respectively. While the generator supplies 8KW of power to the load it feeds, which is the voltage it produces since the output voltage is 250V?
A short shunt compound DC generator delivers a load current of 30 A at 220 V and has armature, series field and shunt field resistances of 0.05, 0.3 and 200Ω respectively. Calculate the induced emf, the armature current and the voltage regulation. Allow 1 V per brush for contact dro
A 50 kW, 220 V, dc shunt generators has an armature resistance including brushes of 0.026 ohms. If the shunt field resistance is 52 Ω. Find the induced emf at rated load.
A short shunt compound DC generator supplies a load of 10A at a voltage of 10 volts. If the resistances of Armature, shunt field and series field windings are 0.01 ohm, 1 ohm and 0.00 ohm respectively. c) Write down the factors to improve the generated voltage.