Two vessel are connected to differential manometer using tubing being filled with water. The higher pressure vessel is than the other. (a) If the mercury reading is in meters of water ? (b) If carbon tetrachloride (s = iwould be the manometer reading for the same pressure difference? mercury density = 13.6 Solution 110 mm, what is the pressure head difference 1.59 )were use instead of mercury, what Air 4 mercury, the connecting 1.38 m lower in elevation water 3 h m X 1.38 2 1 Air water gage liquid

Two vessel are connected to differential manometer using tubing being filled with water. The higher pressure vessel is than the other. (a) If the mercury reading is in meters of water ? (b) If carbon tetrachloride (s = iwould be the manometer reading for the same pressure difference? mercury density = 13.6 Solution 110 mm, what is the pressure head difference 1.59 )were use instead of mercury, what Air 4 mercury, the connecting 1.38 m lower in elevation water 3 h m X 1.38 2 1 Air water gage liquid

Name: Two vessel are connected to differential manometer usingtubing being
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Two vessel are connected to differential manometer usingtubing being filled with water. The higher pressure vessel isthan the other. (a) If the mercury reading isin meters of water? (b) If carbon tetrachloride (s =iwould be the manometer reading for

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

To what height will 68˚F ethyl alcohol rise in a 0.005 in internal diameter glass capillary tube? The density of the alcohol is 49 lbm/ft3 note ? = 0.00156 ???/ ?? and ? = 0°.
Capillary rise in the glass tube used for measuring water level isnot to exceed 0.5 mm. Determine its minimum size, given thatsurface tension for water in contact with air = 0.07112 N/m.
U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
The pressure at a point “m” in the figure shown was increased from 70 kPa to 105 kPa. This causedthe top level of mercury to move 20 cm in the sloping tube. What is the inclination, θ?
For the inverted manometer shown in the figure, all the fluid are at 20 0C. If PB - PA = 687 kPa, What must the height H be in cm. Take water density = 1000kg/m3 Mercury density = 13600kg/m3
Consider a soap bubble of diameter 3 mm. If the surfacetension coeffi cient is 0.072 N/m and external pressureis 0 Pa gage, what is the bubble’s internal gage pressure?( a ) - 24 Pa, ( b ) + 48 Pa, ( c ) + 96 Pa, ( d ) + 192 Pa,( e ) -192 Pa
he gage pressure of the air in the tank shown in the figure is measured to be 65 kPa. Determine the differential height h of the mercury column.
For the traditional equal-level manometer measurement inFig. E2.3, water at 20 ° C fl ows through the plug devicefrom a to b . The manometer fl uid is mercury. If L= 12 cmand h= 24 cm, ( a ) what is the pressure drop through thedevice? ( b ) If the water fl ows through the pipe at a velocityV =18 ft/s, what is the dimensionless loss coeffi cient ofthe device, defi ned by K = ∆ p /( ρ V 2 )?
A cylindrical disk ofwood weighing 45.0 N and having adiameter of 30.0 cm floats on a cylinderof oil of density 0.850 g /cm3(Fig.). The cylinder of oilis 75.0 cm deep and has a diameterthe same as that of the wood.(a) What is the gauge pressure at thetop of the oil column? (b) Supposenow that someone puts a weightof 83.0 N on top of the wood, butno oil seeps around the edge of thewood. What is the change in pressureat (i) the bottom of the oil and(ii) halfway down in the oil?
The gage pressure of air in a pressurized water tank is measured simultaneously by both a pressuregage and a manometer. The differential height h of the mercury column is to be determined. Assumptions The air pressure in the tank is uniform (i.e., its variation with elevation is negligible dueto its low density), and thus the pressure at the air-water interface is the same as the indicated gagepressure.
Pressure in a water container can be measured by an open vertical tube. If the expected water rise is about 20cm. What tube diameter is needed to ensure the capillary action is less than 3%?
In order to measure the pressure difference between two points in a pipeline carrying water, an inverted U tube is connected to the points, and air under atmospheric pressure is entrapped in the upper portion of the U-tube. If the manometer deflection is 0.8 m and the downstream tapping is 0.5 m below the upstream point, find the pressure difference between the two points