Water flows through an 8-inch steel pipe at an average velocity of 6 ft/s. Downstream the pipe divides into an 8 inch main and 2 inch bypass. The equivalent length of the bypass is 22 ft; length of the 8-inch pipe in the bypassed section is 16 ft. Neglecting entrance and -rit losses What fraction of the total water flow passes through the bypass?

Water flows through an 8-inch steel pipe at an average velocity of 6 ft/s. Downstream the pipe divides into an 8 inch main and 2 inch bypass. The equivalent length of the bypass is 22 ft; length of the 8-inch pipe in the bypassed section is 16 ft. Neglecting entrance and -rit losses What fraction of the total water flow passes through the bypass?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What diameter of new cast-iron pipe, 1 mile long is required to discharge 4.5 cu. ft. per second under a head of 50 ft.?
A vessel is being filled with water through an inlet at section 1 having a diameter of 40 mm and a faucet at section 3. The velocity at section 1 is given as 5 m/s, while the discharge at section 3 is given as 0.012 m^3/ s. Assume constant water level. Use 60 mm for the diameter of the outlet at section 2. A. What is the discharge at section 2? B. What is exit velocity at section 2? C. If the water level varies and the velocity at section 2 is 8m/s find the rate of change when d is equal to 1000mm?
Use the Manning equation to find the Flow Rate.
A pump is delivering 160 liters per second of water using an impeller diameter of 254mm and operating at a speed of 1800 rpm. If the speed is held constant and the impeller diameter is changed to 203.2 mm, what is the new discharged of the pump in liters per second?(128 L/s)
Two pipes with C1= 120, connected in series, discharge 4.75 cfs with a loss of head of 27 ft. Each pipe has a length of 1000 ft.If one pipe has a diameter of 18 inches, determine the diameter of the other pipe. Neglect minor losses.
Volume flow rate ?? Solve in 10min please
HYDRAULICS Benzene flows through a 100 mm diameter pipe at a mean velocity of 3 m/s. Find discharge in liter per second.
Water flows at a rate of 500 gal/min through a 400-ft-long line. The first and last 100 ft of the line are 6-in-diameter cast iron pipes, while the middle 200 ft consists of two 4.24-in-diameter cast iron pipes. Find: a. Provide a diagram b. the average velocity in each section of pipe, c. the pressure drop in each length of pipe, and d. the total pressure drop.
PROBLEM 4: In Lake Geneva (Switzerland), there is a water jet (called the Jet d’Eau) that is discharged 425 feet straight upward (measured from the surface of the lake). The exit of the discharge pipe is 8 inches in diameter. Calculate the volume flow rate of the water in ft^3/s
Topics: Fundamental of fluid flow A pipe transports 1962 N/s of water. The pipe tees into a 2"-diameterpipe and a 3"-diameter pipe. If the average velocity in the smaller-diameter pipeis 82 ft/s, calculate the flowrate (in ft^3/s) in the larger pipe.
Water at 60°F is pumped from a reservoir to the top of a mountain through a 6-in. Schedule 120 pipe at an average velocity of 12 ft/s. The pipe discharges into the atmosphere at a level 3,000 ft above the level in the reservoir. The pipeline itself is 4,500 ft long. If the overall efficiency of the pump and the motor driving it is 70 percent and the cost of electric energy to the motor is 4 cents per kilowatt hour, what is the hourly energy cost for pumping this water?
4) A pump operates at 2000 rpm and delivers 200 gal/min at 90 ft head. The water distribution operator is requested to increase the head and flow in the network due to a leak. He increased the pump speed to 2160 rpm. What are the corresponding head and discharge?