Water is pumped at a rate of 21.4 m/s from tank (A) and out through a 300.5 m pipe to tank (B). The surface roughness of the pipe is 0.046 mm. When the water levels are as shown in the given figure, the head provided by the pumpis 70 m. Calculate the pipe diameter (mm) if the water temperature is 10°C (do not assume the water mass density and the VIScosity), Usef% 0.02 for the first iteration and try only one more iterations (two in total) by using Swamee and Jaln formula. Elevation Elevation 135 a 140 m Tank (B) Tevation 100m duind ElevitionS is Tank LA) Write the answer for any numbers after the declemal

Water is pumped at a rate of 21.4 m/s from tank (A) and out through a 300.5 m pipe to tank (B). The surface roughness of the pipe is 0.046 mm. When the water levels are as shown in the given figure, the head provided by the pumpis 70 m. Calculate the pipe diameter (mm) if the water temperature is 10°C (do not assume the water mass density and the VIScosity), Usef% 0.02 for the first iteration and try only one more iterations (two in total) by using Swamee and Jaln formula. Elevation Elevation 135 a 140 m Tank (B) Tevation 100m duind ElevitionS is Tank LA) Write the answer for any numbers after the declemal

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A venturi meter is introduced in a 300 mm diameter horizontal pipeline carrying a liquid under a pressure of 150 kPa. The throat diameter of the me- ter is 100 mm and the pressure at the throat is 400 mm of mercury below atmosphere. If 3% of the differential pressure is lost between inlet and the throat, determine the flow rate of the pipeline. PLEASE USE BERNOULLI'S ENERGY EQUATION. INCLUDE COMPLETE SOLUTION
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW?The Reynolds number of this flow is what? Take the viscosity of the water to be 0.001 Pa*s
Water tower used to supply potable water to a small area which includes 15 houses (Figure 1).Determine water velocity (m/s), diameter size (m), and head losses (m) in BE pipe if you know that thepressure at point B is 200 Kpa, the pipe length is 100 m, and the flowrate is 0.05 m3/s.
What are the flow Q and the velocity V when total head loss is H = 25 m?
For the configuration shown in the figure given below, the fluid is ethyl alcohol at 20°C, and the tanks are very wide. The diameter d of the tube is 2.5 mm. For ethanol, take ρ = 789 kg/m3 and μ = 0.0012 kg/m⋅s. Find the flow rate that occurs in m3/h. Take π = 22/7. Determine the Reynolds number of this flow. Take π = 22/7. Yes or No --> Is the flow laminar?
1A venturi meter is introduced in a 300 mm diameter horizontal pipeline carrying a liquid under a pressure of 150 kPa. The throat diameter of the meter is 100 mm and the pressure at the throat is 400 mm of mercury below the atmosphere. If 3% of the differential pressure is lost between the inlet and the throat, determine the flow rate of the pipeline. Can you draw the figure and complete solution:
From a very large tank with an absolute pressure of 3 bar, the water is discharged to the atmosphere by means of 2 smooth pipes of 100 m length, 1 m and 50 m long, connected in series. The height difference between the water level in the tank and the outlet is 50m, and the diameters of the pipes are 50mm and 100mm, respectively. In addition, a 500kPa turbine is placed on the 2nd Pipe. a) Draw the system roughly, show the dimensions on it.b) Calculate the exit velocity of the water from the 2nd pipe, ignoring the local losses.
Water at 20°C is pumped through a smooth 12-cm-diameter pipe 10 kmlong, at a flow rate of 75 m3/h. The inlet is fed by a pump at an absolute pressure of 4 MPa.The exit is at standard atmospheric pressure (101 kPa) and is 200 m higher. Calculate the frictional head loss Hf and compare it to the velocity head of the flow.
A 6 in. pipe, as shown in the figure, takes water from a reservoir and terminates in a nozzle having a jet diameter of 2 in. Assuming a nozzle loss of 8 percent of the velocity head in the jet, compute the discharge (in S.I. units). Also, make a table showing the elevation head, velocity head, pressure head, and total head at each of the six stations. Lastly, draw the hydraulic gradient line (H.G.L.) & the energy gradient line (E.G.L.).
Water flows from a large tank through an orifice of 75 mm diameter and against a block as shown in the figure. The water jet strikes the block at the vena contrata. The block weighs 223 N and the coefficient of friction between the block and the floor is 0.57. The coefficient of discharge C = 0.60 and its coefficient of contraction Cc = 0.62. What is the minimum height to which water must rise in the tank in order to start the block moving to the right?
In a turbulent flow in a 0.3 m pipe the centerline velocity is 6 m/s, and that 50 mm fromthe pipe wall 5.2 m/s. Calculate the friction factor and flowrate.
A 230-m-long pipeline delivers 20◦C water to a storage reservoir located downstream. The pipeline is galva-nized with an average roughness height of 0.2 mm. An axial pump is used to pressurize upstream water. Thewater surface in the reservoir is located 18 m above the centerline of the pump. The pump discharges waterat an absolute pressure of 400 kPa and a volume flow rate of 50 L/s. Calculate a diameter of pipe requiredto achieve such an operating condition. If needed, use the Moody diagram on the last page, or one can solvethe Colebrook equation using, for example, Matlab.