What are the main forces for fluid displacement in matrix of fractured reservoirs? a) For single-phase condition, compressibility is the main mechanism for fluid displacement matrix b) For multi-phase condition, capillary and gravity forces help fluid displacement in matrix c) For multi-phase condition, fluid displacement is occurred only when the matrix block is totally or partially surrounded by another phase and capillary and gravity forces help fluid displacement in matrix d) For multi-phase condition, the difference between oil-water contact in fracture and matrix the fluid displacement in matrix

What are the main forces for fluid displacement in matrix of fractured reservoirs? a) For single-phase condition, compressibility is the main mechanism for fluid displacement matrix b) For multi-phase condition, capillary and gravity forces help fluid displacement in matrix c) For multi-phase condition, fluid displacement is occurred only when the matrix block is totally or partially surrounded by another phase and capillary and gravity forces help fluid displacement in matrix d) For multi-phase condition, the difference between oil-water contact in fracture and matrix the fluid displacement in matrix

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter13: Slope Stability

Section: Chapter Questions

Problem 13.1P

See similar textbooks

Similar questions

Explain mobile boundary channel and rigid boundary channel. Also explain the formation of river bed based on shear stress? ------------Hydraulics-------------
Regarding geotextiles used in separation, what is the required burst pressure of a geotextile supporting 75-mm maximum-size stone and heavy trucks with a tire inflation pressure of 1000-kPa? Use (where p’ = the pressure at the geotextile interface and p = the inflation pressure); a cumulative reduction factor = 2.0; and a factor of safety = 2.0.
A cylindrical sample of saturated clay 4 cm in diameter and 8 cm high was tested in an unconfined compression apparatus. Find the unconfined compression strength, if the specimen failed at an axial load of 360 N, when the axial deformation was 8 mm. Find the cohesion in kPa if the angle made by the failure plane with the horizontal plane was recorded as 50°. Include free body diagram. a.312 b.106 c.258 d.210
Describe Assumed and actual failure surfaces for active pressure condition in Coulomb analysis.
help asap huhu A cylindrical specimen of a saturated soil fails under a stress of 150 kPa in an unconfined compression test . The failure plane makes an angle of 52° with horizontal a.) Compute the angle of internal friction of soil b.) Compute the cohesion of the soil c.) compute the shearing stress at failure Plane.
A cylindrical sample of saturated clay 4 cm in diameter and 8 cm high was tested in an unconfined compression apparatus. Find the unconfined compression strength, if the specimen failed at an axial load of 360 N, when the axial deformation was 8 mm. Find the major stress in kPa if the angle made by the failure plane with the horizontal plane was recorded as 50°. a. 258 b. 210 c. 312 d. 106
Explain clearly, four main application of HEC-RAS in Hydraulic Engineering
(a) Calculate the area of the joint and the weight of the wedge (W) in MN assuming a unit length along the out of plane direction (normal to the plane of the figure). (b) Calculate the normal force (N) on the joint plane before and after excavation. (C) Calculate the shear force (T) on the joint plane before and after excavation. d) Calculate the frictional shear strength force (S¢) on the joint plane before and after excavation. (e) Calculate the cohesive shear strength force (Sc) on the joint plane before and after excavation. (f)Calculate the total shear strength force (S = Sc + So) on the joint plane before and after excavation. (g) Calculate the partial factor of safety before and after excavation () due to friction only (FoS¢), (i) due to cohesion only (FoSc), (iii) total factor of safety due to both friction and cohesion ((FoS= FoSc+ FoS). (h) Determine dip, dip direction, strike and pole of both planes (slope and joint planes). Discuss the stability of the wedge against…
Why is the failure envelope flat in a UU triaxial test or an unconfined compression test?
A cylindrical specimen of saturated clay, 4.5 cm in diameter, and 9 cm long, is tested in an unconfined compression apparatus. Find the cohesion in kPa if the specimen fails at an axial load of 450 N. The change in length of the specimen at failure is 9 mm. a.130 b.128 c.126 d.132
In a laboratory compression test, the void ratio changes from 1.55 to 1.36 as loading increases through the range from 2,000 to 4,000 psf.(a) What is the value of the coefficient of compressibility for these conditions?(b) What is the compression index for this loading range?
An 18-kg slab slides down a 15° inclined plane on a 3-mm-thick film of SAE 10 oil at 20 °C; the contact area is 0.3 m. Find the terminal velocity of the slab.