y is 0.75. Based on this information, select all the correct statements below. If the powerplant is operated isentropically, the turbine output will be wet steam with 0.78 quality. If the powerplant is operated following the Carnot cycle, the thermal efficiency will increase by 118% If the condenser pressure is decreased, the overall thermal efficiency will also decrease. If the powerplant is operated isentropically, the energy output of the turbine will be 1179 kJ/kg The efficiency of the turbine is 0.75 The overall thermal efficiency of the power plant is 0.255

y is 0.75. Based on this information, select all the correct statements below. If the powerplant is operated isentropically, the turbine output will be wet steam with 0.78 quality. If the powerplant is operated following the Carnot cycle, the thermal efficiency will increase by 118% If the condenser pressure is decreased, the overall thermal efficiency will also decrease. If the powerplant is operated isentropically, the energy output of the turbine will be 1179 kJ/kg The efficiency of the turbine is 0.75 The overall thermal efficiency of the power plant is 0.255

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam enters the high-pressure turbine of an ideal reheat Rankine cycle at 10 MPa and 500°C. The low-pressure turbine inlet admits steam at 1 Mpa. Assume that the pump inlet is a saturated liquid at 10 kPa and that 80 MW of power is produced overall. 1. Using the property tables for both the inlet and outlet of the pump, determine the enthalpy in kJ/kg of the pump outlet. 2. Report the amount of heat added, in kJ/kg, in the boiler before the high-pressure turbine to one decimal place using rounding. 3. Report the amount of work produced in the high-pressure turbine, in kJ/kg, to one decimal place using rounding. 4. Report the amount of heat added in the reheat process, in kJ/kg, to one decimal place using rounding. 5. Report the amount of work produced in the low-pressure turbine, in kJ/kg, to one decimal place using rounding.
A 150 MW gas turbine power plant running on Ideal Brayton cycle has the following initial conditions; air at 22°C & 95 kPa. The compression ratio is 7 and the temperature at the turbine is 910°C. Draw the P-V and T-S diagrams and determine the following: d. Thermal Efficiency e. Mass flow rate, kg/min
A gas turbine power plant working on Brayton cycle, Explain the working principle of the cycle with physical diagram as well as P-V and T-s diagrams, and with all the required details
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40°C at a rate of 850 m3 /min and leaves the turbine at 650°C. Assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine the net power output.
Please use property tables. Thank you Steam enters the high-pressure turbine of an ideal reheat Rankine cycle at 10 MPa and 500°C. The low-pressure turbine inlet admits steam at 1 Mpa. Assume that the pump inlet is a saturated liquid at 10 kPa and that 80 MW of power is produced overall. 1. Using the property tables for both the inlet and outlet of the pump, determine the enthalpy in kJ/kg of the pump outlet. Report your answer to two decimal places using rounding. 2. Report the amount of heat added, in kJ/kg, in the boiler before the high-pressure turbine to one decimal place using rounding. 3. Report the amount of work produced in the high-pressure turbine, in kJ/kg, to one decimal place using rounding.
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40°C at a rate of 850 m3 /min and leaves the turbine at 650°C. Assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine the back work ratio.
A gas-turbine power plant operating on an ideal Brayton cycle has a pressure ratio of 8. The gas temperature is 300 K at the compressor inlet and 1300 K at the turbine inlet. Utilizing the air-standard assumptions, determine (a) the gas temperature at the exits of the compressor and the turbine, (b) the back-work ratio, and (c) the thermal efficiency.
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1200 kPa. The working fluid is air, which enters the compressor at 30°C at a rate of 150 m3/min and leaves the turbine at 500°C. Using constant specific heats for air and assuming a compressor isentropic efficiency of 82 percent and a turbine isentropic efficiency of 88 percent, determine (a) the net power output, (b) the work ratio, and (c) the thermal efficiency.
Steam enters the turbine of a simple vapor power plant with a pressure of 10 MPa and temperature T, and expands adiabatically to 6 kPa. The isentropic turbine efficiency is 85%. The saturated liquid exits the condenser at 6 kPa and the isentropic pump efficiency is 82%. (a) For T = 580°C, determine the turbine exit quality and the cycle thermal efficiency. (b) Plot the quantities of part (a) versus T ranging from 580 to 700°C.Note: Please produce a concise, workable solution that includes all of the necessary details and explanations. Thank you so much; if the wish is fulfilled, I'll hit "like" right away.
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40°C at a rate of 850 m3 /min and leaves the turbine at 650°C. Assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine the thermal efficiency. Use constant specific heats with cv = 0.821 kJ/ kg·K, cp = 1.108 kJ/kg·K, and k = 1.35.
An ideal Rankine cycle operates between the pressure limits of 15,000 kPa in the boiler and 15 kPa in the condenser. If the turbine inlet temperature is 500 deg C and the cycle produces 2500 kW of net work, determine the mass flow rate of the steam in kg/s. Refer to the tables below. a. 1.993 b. 2.122 c. 1.856 d. 2.016
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40C at a rate of 850 m3/min and leaves the turbine at 650C. Using variable specific heats for air and assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine (a) the net power output, (b) the back work ratio, and (c) the thermal efficiency.