You can find the temperature inside your refrigerator without putting a thermometer inside. Take a can of soda from the refrigerator. Let T be the temperature reading of the soda after t hours. If T(0.5) = 45 °F , T(1) = 55 °F, and the room temperature is 70 °F, what is the temperature inside the refrigerator? (A) 28.3 B 23.8 (c) 12.25 D) 11.1

You can find the temperature inside your refrigerator without putting a thermometer inside. Take a can of soda from the refrigerator. Let T be the temperature reading of the soda after t hours. If T(0.5) = 45 °F , T(1) = 55 °F, and the room temperature is 70 °F, what is the temperature inside the refrigerator? (A) 28.3 B 23.8 (c) 12.25 D) 11.1

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter11: Temperature And Temperature- Related Variables In Engineering

Section: Chapter Questions

Problem 42P

See similar textbooks

Similar questions

d) Calculate the change in temperature. Indicate increase or decrease in temperature.
2- The density of a liquid is to be determined by an old 1-cm-diameter cylindrical hydrometer whose division marks are completely wiped out. The hydrometer is first dropped in water, and the water level is marked. The hydrometer is then dropped into the other liquid, and it is observed that the mark for water has risen S cm above the liquid-air interface. If the height of the original water mark is 12.7 cm, determine the density of the liquid. S(cm)=0.95 Unknown liquid Mark for water Scm
2- The density of a liquid is to be determined by an old 1-cm-diameter cylindrical hydrometer whose division marks are completely wiped out. The hydrometer is first dropped in water, and the water level is marked. The hydrometer is then dropped into the other liquid, and it is observed that the mark for water has risen S cm above the liquid-air interface. If the height of the original water mark is 12.7 cm, determine the density of the liquid S (cm) Last names starting 0.95 with A to L Unknown liquid Mark for water S cm
(5) As shown in the image, an air space above a long tube is pressurized to 50 kPa vacuum. Water (15°C) from a reservoir fills the tube to a height h. If the pressure in the air space is changed to 25 kPa vacuum, will h increase or decrease, and by how much? Assume atmospheric pressure is 100 kPa. acuum, will h increase or descrease and by how much? ime atmospheric pressure is 100 kPa. PROBLEM h Air space Water
Calculate the kinematic viscosity of air at 105°F and 29 psig with units of [ft²/s]. The dynamic viscosity of air at 105°F is 4x10-7 slug/(fts) • The density of air is 0.002684 slug ft³ when T = 0°F and P = 14.7 psia.
b. If the temperature inside a class room is given by the function T = x? cos(9y) - z? °C, determine the rate of change of temperature inside the class room at a point (1, 0, -2) m in °C/m.
1.) Derive a formula that can be used to convert a temperature reading from Kelvin to Rankinescales.
A mercury Manometer is attached to a pipe having suction pressure. The right limb is open to the atmosphere while the contact between mercury and water is in left limb at a distance of 30 cm from the center of the pipe. a. If the difference in the Level of mercury in the two limbs is 20 cm, What will be the pressure in the pipe. b. If the pressure in the pipe is increase to Pascal, What will be the new difference in mercury level?
A mercury Manometer is attached to a pipe having suction pressure. The right limb is open to the atmosphere while the contact between mercury and water is in left limb at a distance of 40 cm from the center of the pipe. Solve for a. Pressure in the pipe if the difference in the Level of mercury in the two limbs is 20 cm. b. New mercury level difference if the pressure is increased by +30607 Pascal
A steel tape, with a coefficient of linear expansion of 0.0000116/C, is known to be 50 meters long at 30°C. The tape was used to measure a line was found to be 15532.28 meters long when the temperature was 27°C. Determine the following: a. Temperature correction per tape length b. Temperature correction for the measured line c. Correct length of the line
6. A clean tube of internal diameter 3 mm is immersed in a liquid with a coefficient of surface tension 0.48 N/m. The angle of contact of the liquid with the glass can be assumed to be 130° The density of the liquid is 13,600 kg/m^3? What would be the level of the liquid in the tube (in mm) relative to the free surface of the liquid outside the tube. (2 decimal places)
A Fahrenheit and a Celsius thermometer are both immersed in a fluid. What is the fluid temperature in Kelvin if the Fahrenheit reading is numerically thrice that of the Celsius reading? 251.18 486.67 299.67 O 26.67