Your team is tasked to design the supports for a beam for large air conditioner units. The beam will carry only one unit initially, but the facility may expand in the future. According to the manufacturer's literature, the air conditioner unit will apply a uniformly distributed load on the beam. Determine the reactions and draw the shear and bending moment diagrams for the beam subjected to one air-conditioner unit. 20 kN/m W250x32.7 A = 4190 mm? 1 = 4.91x10" mm E = 200 GPa = 200 kN/mm? 3 m 3 m

Your team is tasked to design the supports for a beam for large air conditioner units. The beam will carry only one unit initially, but the facility may expand in the future. According to the manufacturer's literature, the air conditioner unit will apply a uniformly distributed load on the beam. Determine the reactions and draw the shear and bending moment diagrams for the beam subjected to one air-conditioner unit. 20 kN/m W250x32.7 A = 4190 mm? 1 = 4.91x10" mm E = 200 GPa = 200 kN/mm? 3 m 3 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

If the structure period is less than or equal to 0.7, what will be the concentrated force?
Step 2 1st condition Bending moment at hinge D =0 Rc*2 = (3*2)*(2/2) Rc = 3 KN Rc = 3 KN (upward) could you explain where these numbers coming? Why that divided by two? and is formula like this: 3kN/m*2m*2m/2m? 2nd condition Bending moment at hinge F =0 RB*2= (3*4)*(3+4/2)-3*7 RB = 19.5 KN RB = 19.5 KN ( upward) Same this formula If you can explain this like drawing this on paper and write where all meters and number come, that would be help me. If you could also tell the direction, where you would calculation them
1.In computing he deteminacy of the given structure , what is its classification?2.What is the vertical reaction at E in KN? 3. What is the maximum shear in KN at the position of the 18 kn concentrated load? A) 9 B) 11.25 C) 31.725 D) 35.7254. What is the shear value at point A in KN? A) 9 B) 11.25 C) 31.725 D) 35.7255. What is the shear value at point B in KN? A) 9 B) 11.25 C) 31.725 D) 35.7256. What is the degree of the curve of shear at segment BC? A) no degree B) 0 degree C) 1st degree D) 2nd degree7. What is the moment reaction at joint B in kN m?8.What is the degree of the curve of shear at AB? A) no degree B) 0 degree C) 1st degree D) 2nd degree9. What is the distance from the point of zero shear to point B in m.of member BD? A) 1.50 B) 3.525 C) 3.975 D) 910.What is the maximum negative moment for the frame in KN-m?A) 0 B) 15.19 C) 31.725 D) 55.9211. What is the maximum positive moment for the frame in KN-m?A) 0 B) 15.19 C) 31.725 D) 55.9212. What is the value of moment reaction…
A beam is loaded as shown in the given figure. 1. Which of the following gives the max. shear? a. 15 kN b. 13 kN c. 14 kN d. 12 kN 2. Which of the following gives the max. positive moment? a. 13.8 kN·m b. 13.5 kN·m c. 14.0 kN·m d. 12.8 kN·m 3. Which of the following gives the location of max. pos. moment from point B? a. 2.0 m b. 3.4 m c. 3.0 m d. 2.4 m
A simple beam AB with a total length of 2.40 meters is subjected to a trapezoidal distributed load. The intensity of the load varies from 1.00 kN/m at support A to 3.00 kN/m at support B. What is the reaction at support A and B.What is the resultant applied load?What is the degree of shear-force equation?What is the value of shear force at x = 2.00 m from support A?What is the distance of absolute maximum bending moment from support B?What is the value of bending moment at x = 2.35m?What is the value of absolute maximum bending moment? What is the value of shear force at x = 1.80 m?
A wooden beam 150 mm. wide by 300 mm. deep is loaded as shown. Allowable bending stress is 8 MPa.1. Which of the following gives the max. moment capacity of the beam. a. 16 kN•mb. 18 kN•mc. 17 kN•md. 19 kN•m2. Which of the following gives the max. value of w if x = 2 m. a. 8 kN/mb. 10 kN/mc. 9 kN/md. 11 kN/m
Determine the x and y components of F1 and F2 acting on the boomshown . Express each force as a Cartesian vector.
A billboard 3m high by 4m wide is supported as shown in the figure. The totl weight of the billboard is 30 kN. H = 1.5 m and tetha= 60 degrees. Wimd pressure, q= 1.6 kpa Wind pressure coefficient = 1.0. Determine the reactions at the support.
Two blocks are connected by a light, flexible cable that passes a frictionless pulley. Block A weighs 500N and block B weighs 200N. The coefficient of static friction between A and the ramp is 0.30. Determine: (a) If the motion is impending down the plane, what is the tension force in the cable connecting Block A and Block B. (b) Are the two block in equilibrium state? 3 dec places pls
The cantilever beam shown is subjected to a couple and 2 forces shown. Replace these couple and forces with an equivalent couple M and single force F at point A. Show solution to the answer FH = 1.64 kN, R Fv = 1.16 kN, D M = 2.22 kN-m, CCW
what is the total vertical reaction of a 6-m simply supported beam carrying a trangular load which varies from 0 at one support and 15kN/m at the other support? Answer must be in kN
An equivalent force-couple system: Three forces F1 = 100 N, F2 = 50 N, and F3 = 30 N act on a structure as shown in the figure where α = 30o, θ = 60o, L = 1 m and h = 0.5 m. Find the equivalent force-couple system about point D.