1. In a series RC circuit, ET = 460 volts and ∠θ = 44°. Find EC. 2. In a series RC circuit, ET = 240 volts at 60 Hz. An ammeter indicates a total current of 0.75 amperes. The resistor has a value of 140 Ω. What is the capacitance of the capacitor? 3. In a series RC circuit, the apparent power is 4,250 VA and the reactive power is 2125 VARs. What is the true power?

1. In a series RC circuit, ET = 460 volts and ∠θ = 44°. Find EC. 2. In a series RC circuit, ET = 240 volts at 60 Hz. An ammeter indicates a total current of 0.75 amperes. The resistor has a value of 140 Ω. What is the capacitance of the capacitor? 3. In a series RC circuit, the apparent power is 4,250 VA and the reactive power is 2125 VARs. What is the true power?

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter23: Resistive-inductive-capacitive Series Circuits

Section: Chapter Questions

Problem 3PP: The circuit is connected to a 60-Hz line. The apparent power in the circuit is 29.985 VA, and the...

See similar textbooks

Similar questions

Assume that the voltage drop across the resistor, ER, is 78 V; the voltage drop across the capacitor, EC, is 104 V; and the circuit has a total impedance, Z, of 20 . The frequency of the AC voltage is 60 Hz. Find the missing values. ET ER78V EC104V IT IR IC Z20 R XC VA P VARSC PF C
If a capacitor produces 15 ampere on a 240-volt supply, which of the following is its microfarad rating? 166 microfarad 15 microfarad 200 microfarad 3450 microfarad
A series circuit composed of a resistance of 24 ohms, an inductance of 0.09 henry and a capacitance of 8 microfarad, is connected to a 120-volt 50-Hz supply. Calculate the (a) power factor of the circuit, (b) total reactive power, (c) voltage drop accross the inductor.
The following three impedances are connected in series across a 40 V, 20 kHz supply: (i) a resistance of 8W, (ii) a coil of inductance 130 µH and 5 W resistance, and (iii) a 10W resistor in series with a 0.25 µF capacitor. Calculate the circuit current, the circuit phase angle and the voltage drop across each impedance. A capacitor C is connected in parallel with a resistor R across a 120 V, 200 Hz supply. The supply current is 2 A at a power factor of 0.6 leading. Determine the values of C and R. A coil of 300 turns is wound uniformly on a ring of non-magnetic material. The ring has a mean circumference of 40 cm and a uniform cross sectional area of 4 cm2. If the current in the coil is 5 A, calculate the magnetic field strength, the flux density and the total magnetic flux in the ring.
A 3-phase, 50 Hz, 400 V motor input power is 84000W the power factor being 0.72 lagging. A bank of capacitors is connected in delta across the supply terminals and the power factor raised to 0.89 lagging. Each of the capacitance units is built of 4 similar 100 V capacitors. Determine the capacitance of each capacitor. Capacitance = _________________ Farad
A series RIC circuit consisting of a 25 ohms resistor, 0.8 henry inductor, and a 8.8F capacitor is connected to a 220Vols 60Hz source. Calculate the following: a. Equivalent impedance of the circuit b. Total current c. Voltage across R, L, and C d. Power of the circuit e. Power factor. Please answer all subpart either dislike is ready to you please all subpart...
L:57) A coil having an inductance of 0.01 H and resistance of 5 ohm is connected in parallel with a capacitance of 100 microfarad. If the supply voltage is 220 V and its frequency is 60 Hz, calculate: The reactive power absorbed by the coil The reactive power generated by the capacitor The active power absorbed by the coil.
A series circuit consisting a 9 ohm resistance and 69.747 microfarad capacitance is connected across a 220 Voltas 60Hz supply. Calculate the magnitude of the total impedance of the circuit.
A choking coil having a resistance of 20 Ω and an inductance of 0.07 henry is connected with a capacitor of 60 μF capacitance which is in series with a resistor of 50 Ω. Calculate the total current and the phase angle when this arrangement is connected to 200-V, 50 Hz mains.
A coil has a resistance of 35-Ω and an inductance of 0.14H the coil is connected to 60cps, 117V power source. Calculate a)the circuit current b)phase angle c)power used in the external circuit.
Three impedances are connected in series across a 100 V, 50 Hz supply. The impedances are: Z1 is a coil of inductance 0.018 H and 2 Ω resistance, Z2 is a coil of inductance 0.0228 H and 5 Ω resistance, and Z3 consists of a capacitor of capacitance 400 μF and resistance 3 Ω. Calculate (a) the circuit impedance, (b) the circuit current, (c) the circuit phase angle, and (d) the voltage drop across each impedance.
Three impedances are connected in series across a 100 V, 2 kHzsupply. The impedances comprise:(i) an inductance of 0.45 mH and 2 resistance,(ii) an inductance of 570 µH and 5 resistance, and(iii) a capacitor of capacitance 10 µF and resistance 3 .Assuming no mutual inductive effects between the two inductancescalculate (a) the circuit impedance, (b) the circuit current, (c) thecircuit phase angle and (d) the voltage across each impedance. Drawthe phasor diagram.[(a) 11.12 (b) 8.99 A (c) 25°550 lagging(d) 53.92 V, 78.53 V, 76.46 V]