How to Do an Oil Change (Process Essay Example)

While the oil is draining, locate the oil filter it is white and oval. The oil filter is usually located on the side near the back. After, you locate the oil filter take it off with the oil filter wrench. Once the oil filter is off dispose of it in the trash, then get the new filter, and fill it up with oil before attaching it back to the motor. This step is called priming the car. Priming is when you basically jump starting the motor with whatever you took out. Now the car should be finished draining oil. You can tell its finish from when you look under the car near the motor and see no oil coming out. Once, that is noticed get the oil bolt and put it back in tight, but not too tight because that could strip the bolt out.

The first thing my aunt and I checked first was the oil. Before checking the oil she gave me a few tips. She told me to always get a clean white rag in order for you to see the oil’s cleanliness or dirtiness. She also gave me another helpful hint. When checking the oil she also told me to smell it for any burnt smell. If it was to smell burnt then that would indicate that the oil needed to be replaced. So proceeding onto the checking of my fluids my aunt said that my oil appeared to be

That is how you change your oil a simple process that saves you money and keeps your car running for as long as you need

Central Idea: Changing ones oil in a vehicle is a skill that could save you a lot of time and money

First, you need to remove the oil fill cap under the hood so the oil will flow out freely. Be sure that you have a container for the used oil later; take it to recycle centers which are usually located around town. Remember that it is now illegal to dump oil anywhere. Next find the drain plug, which will be located on the bottom of the engine block. It is the only plug located usually in the middle of a black pan in the front of the vehicle. Be careful that you have the right plug because some transmissions are also equipped with a drain plug. Once the plug has been located, find the right size socket or wrench to fit it, and be careful not to round of the head of the drain plug when you are removing it. Then let the oil drain in to your container. When the pan has drained replace the plug, but do not over-tighten it because you can strip the treads out of pan. Next, you need to find the oil filter, which should be located on either side of the engine block. Then take the oil filter wrench and put it around the filter and remove the old filter. Then take your new filter and take a little

I've been doing my own oil changes since I've owned my first vehicle. As well as every other vehicle that the own would allow me to do it on.

Owning a car is usually a significant investment for an individual. Changing the oil on your car plays an important part to help keep it functioning at peak performance and to ensure that your vehicle last for many miles. You might wonder how often does the oil need changing. Well, manufactures advise that the oil is changed every 3,000 miles or every three months, whichever occurs first. Changing the oil is not an extremely difficult task, but it is always good to have someone else there, who has done this before, to help if needed. I would also suggest finding an outfit you wouldn’t mind getting dirty and a pair of rubber gloves to keep your hands clean.

once all the water is out is to replace the spark plug and the air filter. Pull

After letting the car sit for a minute or two, the oil should be fully drained. Reinstall the oil drain plug. Use a torque wrench set to 30 ft./lbs. if you have one. Otherwise, tighten it until snug. Then install the new oil filter. First, lubricate the inner threads, then lubricate the rubber seal around the edge of the filter. Next, fill the filter with fresh oil. Then tighten the filter by hand until snug.

The reconstructing of the car is important because it will let you know if the oil change was done successfully. Checking the new oil level is crucial to determining if the oil change was done right or not. Start the car and let it run for five minutes, but make sure the engine oil cap is back on so oil does not spew everywhere. When the car is turned off, use the oil dipstick, which is in the engine bay, to check the oil level. If the stick reads that the level is good, the oil

6.     Check in after 10 minutes, if you don?t see anymore oil dripping out, screw the nut back in tightly and also screw on the new oil filter. Using a little bit of motor oil on the rubber gasket will ensure a tight fit.

There are a few basic elements of an oil change, starting with draining the old oil from your engine and replacing it with new oil. Automotive technicians will also replace both the oil filter and the air filter in your vehicle. Each of these steps prevents damaging build-up of debris and helps keep your engine running with the least amount of wear and tear possible.

Prior to you make use of, ensure that the item is devoid of grease, dust and oil. So clean the surface area prior to you make use of Wipe New item. Dirt and dust on the surface area can make the car appearance dull.

It is important that you clean the primary fuel filter, in addition to changing the secondary filter, according to the manufacturers

Changing the oil in a vehicle is simple for the car owner to learn how to change car oil. It does not require many tools and supplies to complete the task. There are five easy steps changing the oil in a car: go to buy the supplies, Jack the car up, remove the oil drains plug, remove the oil filters, and remove the oil cap.