Q3: The air enters the compressor of an open cycle gas turbine at I bar and 20'C. The overallpressure ratio of the cycle is 4/1. The isentropic efficiencies of the compressor and turbineare 80% and 85% respectively. The air/fuel ratio used is 80/1 with a heating value of41800 kJAkg. The pressure drop in the combustion chumber is 0,1l bar and thecombustion efficiency is 96%. The air flow rate is estimated to be 5 kg's. Determine:• Power output in kW.• Cycle thermal efficiency.Assume that the working fluid around the cycle has the properties C, = 1.10 kJ/kg K andy= 14

Answered: Image /qna-images/answer/c9e6d02a-85f5-4305-be95-502eb18b56ba.jpg

The air enters the compressor of an open cycle gas turbine at I bar and 20°C. The overall pressure ratio of the cycle is 4/1, The isentropic efficiencies of the compressor and turbine are S0% and 85%N respectively. The air fuel ratio used is 801 with a heating value of 41800 JAg The pressure drop in the combustion clumber is 0.11 har and the combustion efficiency is 96%. The air flow rate is estimated to be 5 kg's. Determine: • Power output in kW. • Cycle thermal efficiency. Assume that the working fluid around the cycle has the properties C, 1.10 kukg K and y=14

The air enters the compressor of an open cycle gas turbine at I bar and 20°C. The overall pressure ratio of the cycle is 4/1, The isentropic efficiencies of the compressor and turbine are S0% and 85%N respectively. The air fuel ratio used is 801 with a heating value of 41800 JAg The pressure drop in the combustion clumber is 0.11 har and the combustion efficiency is 96%. The air flow rate is estimated to be 5 kg's. Determine: • Power output in kW. • Cycle thermal efficiency. Assume that the working fluid around the cycle has the properties C, 1.10 kukg K and y=14

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Sketch the Brayton cycle . Air enters the compressor of the cycle at 1 bar and 25 °C. Pressure after compression is 3 bar. Temperature at turbine inlet is 650 °C. Determine per kg of air a. Cycle efficiency, b. Heat supplied to air c) Work available,
Air enters the compressor of an air standard Brayton cycle with a volumetric flow rate of 60m3/s at 0.8 bar, 280K. The compressor pressure ratio is 20, and the maximum cycle temperature is 1800k. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. Determine: a) the net power developed, in kW. b) the rate of heat addition in the combustor, in kW. c) the percent thermal efficiency of the cycle
Air enters the compressor of an ideal air standard Brayton cycle at 100 kPa, 290 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1500 K. If a regenerator with an effectiveness of 70% is incorporated in the cycle, determine (i)turbine work, (ii) compressor work, (iii) heat supplied, and (iv) the efficiency of the cycle. Draw a suitable block diagram and T-s diagram. Take Cp=1.005 kJ/kg K and ϒ= 1.4
2-Air enters the compressor of a cold-air-standard Brayton cycle with regeneration, intercooling and reheating at 100kPa, 300K, with a mass flow rate of 6kg/s. The compressor pressure ratio are the same across each compressor stage. Overall compression ratio of the system is 10. The intercooler and reheater both operate at the same pressure. The temperature at the inlet to the second compressor stage is 300K. The temperature at the inlet of both turbine is 1400K. The compressor and turbine stages each have isentropic efficiencies of 80% and the regenerator effectiveness is 80%. For k=1.4, calculate: A) the thermal efficiency of the cycle, the back work ratioand the net power developed, in kW.
A gas turbine power plant working on Brayton cycle as per the following specifications Pressure and temperature of air at inlet to compressor = 1 bar and 10oC Power output of the plant = 8 MW Temperature at inlet to the turbine = 780 oC Pressure ratio = 12 Isentropic efficiency of compressor = 100% Isentropic efficiency of turbine = t(%)= 91 Perform the following: 1) Pressure, specific volume and temperatures at all the points of the cycle? 2) Mass flow rate required?
1. In an ideal air-standard Otto cycle, the initial conditions are 1 bar and 300 K. The compression ratio is 12:1, and the maximum cycle temperature is 2500 K. Assuming cp = 1.004 kJ/kg-K & k = 1.4, find: (a) show the cycle in both P-v and T-s diagrams. Clearly label all states and energy transfers. (b) temperature at the end of compression, T₂ in K. (c) heat added during the combustion process in kJ/kg. (d) thermal efficiency of the cycle. (e) net work output from the cycle in kJ/kg.
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 90 kPa, 293 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10, and the turbine inlet temperature is 1300 K. The turbine and the compressor each have isentropic efficiencies of 85% and the regenerator effectiveness is 85%. Assume constant specific heats, take k = 1.4 and CP = 1.005 kJ/kgK. 3.2.1 Represent the cycle on a T – s diagram. Calculate: 3.2.2 the thermal efficiency of the cycle, 3.2.3 the back work ratio, and 3.2.4 the net power developed, in kW.
Analyzing a Regenerative Gas Turbine with Intercooling and ReheatEXAMPLE 9.11 -A regenerative gas turbine with intercooling and reheat operates at steady state. Air enters the compressor at 100 kPa, 300 K with a mass flow rate of 5.807 kg/s. The pressure ratio across the two-stage compressor is 10. Thepressure ratio across the two-stage turbine is also 10. The intercooler and reheater each operate at 300 kPa. At the inlets to the turbine stages, the temperature is 1400 K. The temperature at the inlet to the second compressor stage is 300 K. The isentropic efficiency of each compressor and turbine stage is 80%. The regenerator effectiveness is 80%. Determine: (a) the thermal efficiency (b) the back work ratio (c) the net power developed, (kW).
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. Determine: (a) the compression ratio, r. (b) the cutoff ratio, rc. (c) the thermal efficiency of the cycle, ?th (%). (d) the mean effective pressure, mep (kPa).
Air enters the compressor of a regenerative air-standard Brayton cycle at 14 lbf/in2, 520◦R. The compressor pressure ratio is 14 and the turbine inlet temperature is 2500◦R. The compressor and turbine have isentropic efficienciesof 83 and 87 %, respectively. The net power developed is 5×106Btu/h. For regenerator effectiveness values rangingfrom 0 to 100% plot a) the thermal efficiency. b) the percent decrease in heat addition to the air.
Air enters in an open bryton power plant at 1 bar and 27°C and compresses to a pressure of 5 bar. The isentropic efficiencies of the turbine and compressor are 80 and 85 % respectively. And the maximum temperature in the cycle is limited to 1100 K. Find out the efficiency of the cycle when 10 % pressure loss while flowing through combustion chamber.
The pressure and temperature at the beginning of compression of a cold air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and the temperature is 2050 K. Assume constant specific heats evaluated at 300 K.Determine:(a) the compression ratio.(b) the cutoff ratio.(c) the percent thermal efficiency of the cycle.(d) the mean effective pressure, in kPa.