The compression ratio in an air-standard Otto cycle is (8). At the beginning of thecompression stroke, the pressure is (0.1 MPa) and the temperature is (15°C). The heat transferto the air per cycle is (1800 kJ/kg). Determine:1) The pressure and temperature at the end of each process in the cycle.2) Thermal efficiency.3) Mean effective pressure.

Givenair standard otto cycler=8P1=0.1MPaT1=15oCQadd=1800 kJ/kg

The compression ratio in an air-standard Otto cycle is (8). At the beginn mpression: stroke, the pressure is (0.1 MPa) and the temperature is (15°C). The he the air per cycle is (1800 kJ/kg). Determine 1) The pressure and temperature at the end of each process in the cycle. 2) Thermal efficiency. 3) Mean effective pressure.

The compression ratio in an air-standard Otto cycle is (8). At the beginn mpression: stroke, the pressure is (0.1 MPa) and the temperature is (15°C). The he the air per cycle is (1800 kJ/kg). Determine 1) The pressure and temperature at the end of each process in the cycle. 2) Thermal efficiency. 3) Mean effective pressure.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At the beginning of the compression process of air-standard Diesel cycle operating with a compression ratio of 18, the temperature is 300 K and the pressure is 0.1 MPa. The cut-off ratio for the cycle is 2 and the mass flow rate in the system is 1900 kg/hr. Cp=1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) calculate the thermal efficiency of the cycle in %? 2) which formula should be used to determine the thermal efficiency of the cycle ?
Consider an air-standard Otto cycle. At the beginning of the compression process, the pressure and temperature are 100 kPa and 300 K. The displacement volume is 2 liters, compression ratio is 10 and the pressure at the end of the combustion is 4 times the pressure at the end of the compression.Use cold-air standard calculations and determine:1-the pressure, temperature and volume. 2-the net work per cycle. 3- the thermal efficiency of the cycle.
The temperature at the beginning of the compression process of an air-standard Otto cycle with a compression ratio of 10 is 21 0C, the pressure is 101 kPa, and the mass flow rate of air in the engine is 580 kg/min. The maximum temperature during the cycle is 1300 0C.cp = 1.006 kJ/kg K cv = 0.717 kJ/kg K 1,calculate the power obtainable from the cycle in kW? Answer to 1 decimal place. 2. calculate the thermal efficiency of the cycle in %? Answer to 1 decimal place
The temperature at the beginning of the compression process of air-standard otto cycle with a compression ratio of 10 is 21 °C , the pressure is 101 kPa, and the mass flow rate of air in the engine is 580 kg/min. The maximum temperature during the cycle is 1300 °C. Cp= 1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) which formula should be used to determine the thermal efficiency of the cycle? 2) calculate the thermal efficiency of the cycle in %?
At the beginning of the compression process of air-standard Diesel cycle operating with a compression ratio of 18, the temperature is 300 K and the pressure is 0.1 MPa. The cut-off ratio for the cycle is 2 and the mass flow rate in the system is 1900 kg/hr. Cp=1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) which formula should be used to determine the temperature after heating 2) calculate the temperature after isentropic compression in the presentable unit? 3) calculate the temperature after isentropic expansion in the presentable unit?
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2050 K. Determine a. the compression ratio. b. the cutoff ratio. c. the thermal efficiency of the cycle. d. the mean effective pressure, in kPa.
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2050 K. Determine:(a) the compression ratio.(b) the cutoff ratio.(c) the percent thermal efficiency of the cycle.(d) the mean effective pressure, in kPa.
OTTO CYCLE The compression ratio of an ideal Otto cycle is 8. Air is 95 kPa and 27 Celsius at the start of thecompression operation, and 750 kJ/kg of heat is transferred to air during the constant-volumeheat-addition process. The variation of specific heats with temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. Show complete solution.
The compression ratio of an air-standard dual cycle is 12 and a cutoff ratio of 1.3. The pressure ratio during the constant-volume heat addition process is 1.5. This cycle is operated at 100 kPa and 20°C at the beginning of the compression. By using the constant specific heats at room temperature, evaluate; (1) the maximum gas pressure: (i) the maximum gas temperature, (n) amount of heat added; and (iv) thermal efficiency.
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 80 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2150 K. (a) Determine the compression ratio. r = (b) Cutoff Ratio (c) Thermal Efficiency (d) Mean Effective Pressure
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. The Compression Ratio is 23.24 Determine the compression ratio.
The air standard given in the figure is the pressure ratio 7 of the regenerative Brayton cycle and the cycle of the air the inlet pressure is 100 kPa. The minimum temperature of the cycle is 37 C and the maximum temperature is 877 C. measured as. The isentropic efficiency of the compressor is 70%, the isentropic efficiency of the turbine is 85% and regenerator efficiency is known to be 65%. a) Calculate the air temperature at the turbine outlet.b) Calculate the net power of the cycle.c) Calculate the efficiency of the cycle.