Answered: 1. A brass rod of diameter 25 mm and…

1. A brass rod of diameter 25 mm and length 250 mm is subjected to a tensile load of 50 kN and the extension of the rod is equal to 0.3 mm. Find the Young's Modulus or Modulus of Elasticity.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

PROBLEMFor the plane truss given below, using the Matrix Stiffness Analysis method, determine;• Determine displacements of the joints• Determine the forces in the truss members• Determine the support reactionsNote that the whole system has 4 nodes and hence 8 degrees of freedom. These degrees of freedomsare shown (in their positive directions) on the right hand side of the problem picture (1 to 8). So, thesystem stiffness matrix, K, will be 8x8 in size.Force and displacement units should be consistent (mm’s and N’s for example)
Calculate the maximum force P that can be applied in a phosphor bronze spring having mean diameter of 150 mm and consisting of 24 turns of 10-mm diameter wire when the spring is stretched 180mm. Use G = 42 GPa. Group of answer choices 233.11 N 113.33 N 116.667 N 225.56 N
01: A 105cm Rod is suspended on a wall with a 5N force pulling upwards, 110 degrees away from the horizontal axis and 5cm from a 50kgm hanging object. Find the location of the C.G. away from the wall. Neglect the Mass of the rod and consider it a rigid body. Assume SSLC. 02: Considering a CCW movement is Positive, what is the total value of the Negative Moments at the point with the 50kgm object? Please answer in four decimal places, in Nm. 03: What is the value of C.G. away from the wall? (in meters, two decimal places)
Three parallel springs have stiffness constant of 100 N/m each. Determine the spring stiffness equivalent of the springs. 300 N/m 0.01 N/m 100 N/m 33.3 N/m
An 18 coils helical spring having a load of 100kg. The modulus of elasticity in shear of spring is 96.62 GPa, OD of 9.256 cm and with wire diameter of 9.525 mm. The spring is squared and ground ends. Compute for the following respectively: 1) number of effective coils2) spring index3) axial load (N) 4) deflection (mm) Answers must be at least in 4 decimal places.
At a temperature of 60°F, a 0.03-in. gap exists between the ends of the two bars shown. Bar (1) is an aluminum alloy [E = 10,000 ksi; v = 0.32; α=α=12.5 x 10-6/°F] bar with a width of 3.0 in. and a thickness of 0.70 in. Bar (2) is a stainless steel [E = 28,000 ksi; v = 0.12; α=α=9.6 x 10-6/°F] bar with a width of 1.9 in. and a thickness of 0.70 in. The supports at A and C are rigid. Assume h1=3.0 in., h2=1.9 in., L1=27 in., L2=47 in., and Δ=Δ= 0.03 in. Determine(a) the lowest temperature at which the two bars contact each other.(b) the normal stress in the two bars at a temperature of 260°F.(c) the normal strain in the two bars at 260°F.(d) the change in width of the aluminum bar at a temperature of 260°F.
At a temperature of 60°F, a 0.03-in. gap exists between the ends of the two bars shown. Bar (1) is an aluminum alloy [E = 10,000 ksi; v = 0.32; α=α=12.5 x 10-6/°F] bar with a width of 3.0 in. and a thickness of 0.70 in. Bar (2) is a stainless steel [E = 28,000 ksi; v = 0.12; α=α=9.6 x 10-6/°F] bar with a width of 1.9 in. and a thickness of 0.70 in. The supports at A and C are rigid. Assume h1=3.0 in., h2=1.9 in., L1=27 in., L2=47 in., and Δ=Δ= 0.03 in. Determine:
A sectional steel cable of 3.00 cm2 has a mass of 2.40 kg per meter. If the cable is 500 m long hanging on a vertical cliff, how far the cable is stretched due to weighs itself? Known young steel modulus 2.00 x 10¹¹ N/m2 . (b). If there are two climbers hanging on the cable, determine how far cable is stretched. The mass of climbers is 60 kg and 70 kg, respectively.
At a temperature of 60°F, a 0.05-in. gap exists between the ends of the two bars shown. Bar (1) is an aluminum alloy [E = 10,000 ksi; v = 0.32; α=α=12.5 x 10-6/°F] bar with a width of 2.9 in. and a thickness of 0.80 in. Bar (2) is a stainless steel [E = 28,000 ksi; v = 0.12; α=α=9.6 x 10-6/°F] bar with a width of 1.9 in. and a thickness of 0.80 in. The supports at A and C are rigid. Assume h1=2.9 in., h2=1.9 in., L1=28 in., L2=42 in., and Δ=Δ= 0.05 in. Determine(a) the lowest temperature at which the two bars contact each other.(b) the normal stress in the two bars at a temperature of 255°F.(c) the normal strain in the two bars at 255°F.(d) the change in width of the aluminum bar at a temperature of 255°F. Determine the lowest temperature, Tcontact, at which the two bars contact each other.
A bar of dimension 120 mm x 50 mm x 40 mm, is subjected to an axial pull of 50 kN. The measured extension is 0.25 mm and change in depth is 0.0036 mm. Calculate: (i) Young’s Modulus, (ii) Poisson’s ratio (iii) Shear Modulus. and (iv) Bulk Modulus (i) The Young's modulus is (N/mm2) = _________________ (ii) Poisson's ratio = ___________________ (iii) The shear modulus is (unit in N/mm2) = ________________ (iv) The Bulk modulus is (unit in N/mm2) =
A 5.0m long steel wire has a cross-sectional area of 0.55cm^2. Its proportional limit has a value of 0.0018 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at its upper end and hangs vertically. a. How great a weight can be hung from the wire without exceeding the proportional limit? b. How much will the wire stretch under this load? c. What is the maximum weight that the wire can support?
A load weighing P kN aswith AB, AC and AD cables such asare carried. Points A and B are x-axis, Cand D points are on the y-z plane.Specific to your name in the data tableAB, AC and AD cable using ratingsCalculate the forces. P (kn) = 440 L1 (m) = 11 L2 (m) = 10 L3 (m) = 16 L4 (m) = 18 L5 (m) = 16 L6 (m) = 5