1. A total of 5,000 person-trips are made between a commercial district and a residential area duringthe PM peak hour. Commuters have two modes available, including private automobile and a light-rail transit system. The following utility function was calibrated using data from the study area fromusers of these two modes:U 3D -0. 50T1 — 0. 50T, — 2. 00СData summarizing the operational characteristics and costs associated with each mode are provided inthe following table.PrivateLight-RailParameterAutomobileTransit= in-vehicle travel time (min.)10T1T2 = excess time (min.)C = out-of-pocket cost (dollars)155105.002.00Determine how many trips will be made by each travel mode based on these characteristics.

Uk = -0.5 T1 - 0.5 T2 - 2.00 C For Private Automobile ; T1 = 10 , T2 = 5 and C = 5.00 Uk = -0.5 (10)…

1. A total of 5,000 person-trips are made between a commercial district and a residential area during the PM peak hour. Commuters have two modes available, including private automobile and a light- rail transit system. The following utility function was calibrated using data from the study area from users of these two modes: Uk = -0. 50T1 – 0. 50T2 – 2. 00C Data summarizing the operational characteristics and costs associated with each mode are provided in the following table. Private Light-Rail Parameter Automobile Transit T1 = in-vehicle travel time (min.) T = excess time (min.) 10 15 10 C = out-of-pocket cost (dollars) 5.00 2.00 Determine how many trips will be made by each travel mode based on these characteristics.

1. A total of 5,000 person-trips are made between a commercial district and a residential area during the PM peak hour. Commuters have two modes available, including private automobile and a light- rail transit system. The following utility function was calibrated using data from the study area from users of these two modes: Uk = -0. 50T1 – 0. 50T2 – 2. 00C Data summarizing the operational characteristics and costs associated with each mode are provided in the following table. Private Light-Rail Parameter Automobile Transit T1 = in-vehicle travel time (min.) T = excess time (min.) 10 15 10 C = out-of-pocket cost (dollars) 5.00 2.00 Determine how many trips will be made by each travel mode based on these characteristics.

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter2: Transportation Systems And Organizations

Section: Chapter Questions

Problem 4P

See similar textbooks

Similar questions

A calibration study resulted in the following utility equation for different modes in a particular city;??=??−(0.25)(?1)−(0.032)(?2)−(0.015)(?3)−(0.002)(?4)where ??= mode specific constant?1= access plus egrees time in minutes?2= waiting time in minutes?3= line-haul time in minutes?4= out-of-pocket cost in centsFor a particular origin-destination pair, the forecasted number of trips is 5,000. For this particular trip, there are two modes available, bus and auto.a) If the characteristics of these two modes are as follows, how many trips will be taken by bus? And by car? Assume that the mode specific constant is equal to -0.12 for the automobile and -0.22 for bus.b) Assume that a new mode, rapid transit, is to be introduced into the market between these two zones. The characteristics of this new service are as follows:?1=10 ?2=5 ?3=30 ?4=75 Assume from experience in other cities that the mode specific constant for rapid transit is -0.41. What willbe the modal shares of the 5,000 trips…
plz, solve this question, it is not graded question. Transportation Engineering-1 Space Requirements for a Parking Garage The owner of a parking garage located in a CBD has observed that 22 percent of those wishing to park are turned back every day during the open hours 8 a.m. to 6 p.m. because of a lack of parking spaces. An analysis of data collected at the garage indicates that 65 percent of those who park are commuters, with an average parking duration of 9 hours, and the remaining percentage are shoppers, whose average parking duration is 2 hours. If 25 percent of those who cannot park are commuters and the rest are shoppers, and a total of 220 vehicles currently park daily in the garage (i.e. parking spaces are 220), determine the number of additional spaces required to meet the excess demand. Assume parking efficiency is 0.90.
Design Hourly Volume (DHV) is the projected hourly volume that is used for design. This volume is taken as a percentage of choose one of the following the average annual traffic the average weekley traffic the average daily traffic none of the given choices
Using the data on the table, determine the following using transit rule.
Question. 2Propagation speed of 45 km/hr and that each toll booth takes 6 seconds to service a car.Suppose the caravan of 10 cars begins immediately in front of the first toll booth, travels 20 km to a second toll booth, then another 40 km to a third toll booth, and finally stops immediately after the third tool booth. Thus, they travel a total of 60 km. What is the total end to-end delay?
2. Explain the following terms: a) AADTb) ADTc) Volume flow diagramd) Thirtieth highest hourly volume This is the question of Transport Infrastructure.
A toll bridge carries 10,000 veh/day. The current toll is ₱150/vehicle. Studies shown that for eachincrease in toll of ₱25, the traffic volume will decrease by 1000 veh/day. It is desired to increasethe toll to a point where revenue will be maximized.a. Write the expression for travel demand on the bridge related to toll increase and currentvolume. b. Determine the toll charge to maximize revenues. c. Determine traffic in veh/day after toll increase. d. Determine the total revenue increase with new toll.
Two routes are available to carry 1200 vehicles in peak-hour traffic. Route 1 has a posted speed limit of 45 mph and is 5 miles long. The travel time increases by 2x2, where x is vehicles in thousands. Route 2 has a limit of 55 mph and is 6.7 miles long, and the travel time increases by 1.5x. Find the user-equilibrium travel flow and travel time.
28 pedestrians per cycle (both directions combined) use a crosswalk to cross a 72-ft wide street. The width of the crosswalk is 11 ft. If the walking speed is 3.5 ft/s, how much τi,ps should be allocated so that the pedestrians can safely cross? Group of answer choices 31.0 sec 21.2 sec 56 sec 52.8 sec
Calculate the annual monetary benefit ($ from travel time/delay savings) for an intersection improvement project that reduces average delay by 3.7 sec/veh given the following information:· Average hourly wage in the city is $24.80· Assume 60% of salary for value of travel time savings· Assume 1.65 persons per vehicle· Average Daily Traffic for this intersection is 21,500 vehicles per day
For this exercise, you are to design a roadway that is to carry 100,000 people a day (excluding truck occupants) – 50,000 in design direction. The vehicles that carry these people include; (1) personal vehicles (average occupancy of 1.2 people per car) 2-2 kip single axles, and (2) buses with 2-22 kip single axles (assume they are filled with an average of 40 passengers). There are also trucks on the roadway and all trucks have 1-40 kip triple axle, 1-32 kip tandem axle, and 1-8 kip single axle. You know that the soil CBR is 6, the initial PSI is 4.5 and the TSI is 2.5. Other values to be used:  All drainage coefficients = 1.0  Reliability = 90%  Overall standard deviation of traffic = 0.50  Concrete Modulus of Elasticity = 5.5 million lb/in2  Concrete Modulus of Rupture = 750 lb/in2  PCC load transfer coefficient = 3.0 Design a rigid and flexible pavement, to last 15 years, for a four-lane road (four lanes in design direction) with 400 trucks per day in the design direction, and…
The average of 24-hour traffic counts collected over a number of days greater than one but less than a year.