1. A W-shaped glass tube is partly filled with water. The tube is open to the atmosphere on the left side only. There is air enclosed in the space above W. Points V, X and Y are at the same height above the bottom of the container. Point Z is at the same height as the surface of the water in the left tube. Air Rank the pressures at the points V, W, X, Y, and Z. Explain the reasoning you used to rank the А. W pressures. Is the pressure of the pocket of air enclosed in the space above point W greater than, less than, or equal to atmospheric pressure? Explain your reasoning. В. С. If you were to poke a hole in the top of the tube, directly above point Z, would water squirt out of the tube, or would air get sucked in? Explain your reasoning. The world's record for the deepest scuba dive is held by Ahmed Gabr, who dove to a depth of 332 m in September 2014. Assume Ahmed's face mask had a rectangular shape, 0.1m by 0.2m, and determine the magnitude of the force that the water exerted against the face mask at that depth. D.

1. A W-shaped glass tube is partly filled with water. The tube is open to the atmosphere on the left side only. There is air enclosed in the space above W. Points V, X and Y are at the same height above the bottom of the container. Point Z is at the same height as the surface of the water in the left tube. Air Rank the pressures at the points V, W, X, Y, and Z. Explain the reasoning you used to rank the А. W pressures. Is the pressure of the pocket of air enclosed in the space above point W greater than, less than, or equal to atmospheric pressure? Explain your reasoning. В. С. If you were to poke a hole in the top of the tube, directly above point Z, would water squirt out of the tube, or would air get sucked in? Explain your reasoning. The world's record for the deepest scuba dive is held by Ahmed Gabr, who dove to a depth of 332 m in September 2014. Assume Ahmed's face mask had a rectangular shape, 0.1m by 0.2m, and determine the magnitude of the force that the water exerted against the face mask at that depth. D.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The gauge pressure of the air-water interface in the tank shown in the figure to the right is 65 kPa. (a) Determine the absolute pressure at the interface between water and mercury. (b) What is the gauge pressure at the oil-mercury interface? (c) Determine the differential height h of the mercury column.
The L-shaped tank shown in the figure is filled with water and is open at the top. What is the force due to the water (a) on face A and (b) on face B? Express your answer in terms of d, g, the density of water ρ, and atmospheric pressure P0.
A vertical U-shaped tube is filled with a liquid of density ρ and the right end of the tube is sealed with a stopper, as shown in the left figure. Some of the liquid is removed from the left column with a syringe and the left column descends a distance d, while the right column remains as it was. Refer to the right figure. a) Calculate the pressure difference, in pascals, between levels C and A, ΔP = PC - PA, for ρ = 1.06×103 kg/m3 and d = 7 cm.
Write an equation for the pressure difference ΔP between the inside and outside of the ball when it is submerged a distance y below the surface of the water.
A fluid filled container is shown below. Oil fills the left side of the “U” to a depth of 33.0 cm while water fills the rest. The oil has a density of 753 kg/m3. The radius of the tube on the left side is 27.0 cm and the radius of the tube on the right side is 38.0 cm. a. If the mass on the left is removed, what is the difference in heights between the two sides?
Q1.Why should the tail water level remain below the vertex of the notch? Q2.Why the water head measurement is made at some distance upstream from the notch? WHAT is this minimum distance In case of Vnotch
A cylindrical tank at SeaWorld is full of seawater. The tank is 20m in diameter and 5m in height. a) what is the wight density of seawater? b) what is the total force on the bottom of the tank due to the seawater? c) what is the total force on the sides of the tank of seawater? use pie = 3.14159 in your calculations for this problem
Two clean parallel glass plates, separated by a distance d = 1.5 mm, are dipped in a bath of water. How far does the water in mm rise due to capillary action, if begin mathsize 14px style text σ end text end style = 0.0730 N/m?
A circular pan of liquid with density ρ is centered on a horizontal turntable rotating with angular speed ω, as shown in the figure to the right. Atmospheric pressure is P0. Find expressions for(a) the pressure at the bottom of the pan and(b) the height of the liquid surface as functions of the distance r from the axis, given that the height at the center is h0.
A non-viscous fluid with density ρ = 0.810 g/cm3 is flowing in a horizontal direction as shown in the image below. At point 1, the speed of the fluid is v1 = 1.2 m/s. The cross-sectional areas at point 1 and 2 are A1 = 21 cm2 and A2 = 18 cm2, respectively. What is the gauge pressure at point 2 if the gauge pressure at point 1 is 413 Pa?
Looking at the figure below, a small parallelepiped of fluid centered on the point, explain why the pressure will be independent of x and z? And what will you need to know to determine the pressure in y?
Air at 20°C flows through the tube as shown. Assume that air is an ideal fluid.a. What are the air speeds v1 and v2 at points 1 and 2?b. What is the volume flow rate?