1. Air enters the compressor of an ideal air-standardBrayton cycle at 100 kPa, 300 K, with a volumetricflow rate of 5 m 3 /s. The compressor pressure ratiois 10. The turbine inlet temperature is 140 K.Determine (a) the thermal efficiency of the cycle,(b) the back work ratio, (c) the net powerdeveloped, in kW.Draw a detailed PV and Ts diagramNote: For AlR, useCp =1.0062 kJ/kg-K, R= 0.287KJ/kg-K

Answered: Image /qna-images/answer/854e10bd-a4a7-4d9b-8fec-2f8c6c137648.jpg

1. Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m 3 /s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Determine (a) the thermal efficiency of the cycle, (b) the back work ratio, (c) the net power developed, in kW. Draw a detailed PV and Ts diagram Note: For AIR, use c, =1.0062 kJ/kg-K, R = 0.287 KJ/kg-K

1. Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m 3 /s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Determine (a) the thermal efficiency of the cycle, (b) the back work ratio, (c) the net power developed, in kW. Draw a detailed PV and Ts diagram Note: For AIR, use c, =1.0062 kJ/kg-K, R = 0.287 KJ/kg-K

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters the compressor of an ideal air standard Brayton cycle at 100 kPa, 290 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1500 K. If a regenerator with an effectiveness of 70% is incorporated in the cycle, determine (i)turbine work, (ii) compressor work, (iii) heat supplied, and (iv) the efficiency of the cycle. Draw a suitable block diagram and T-s diagram. Take Cp=1.005 kJ/kg K and ϒ= 1.4
Air enters the compressor of a regenerative air-standard Brayton cycle at 14 lbf/in2, 520◦R. The compressor pressure ratio is 14 and the turbine inlet temperature is 2500◦R. The compressor and turbine have isentropic efficienciesof 83 and 87 %, respectively. The net power developed is 5×106Btu/h. For regenerator effectiveness values rangingfrom 0 to 100% plot a) the thermal efficiency. b) the percent decrease in heat addition to the air.
At the beginning of the cooling process of an ideal Brayton cycle, the pressure and temperature of the air are 200 kPa and 550°C. The state of the air leaving the compressor is 2.0 MPa, 400°C. Assuming constant specific heats (R=0.287 kJ/kgK, cv=0.718 kJ/kg K, cp=1.005 kJ/kg K), determine the back work ratio of the cycle.
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rateof 5 m3/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. The thermal efficiency is 45.7%, back work ratio is 39.6%, net power delivered is 2481 kW. Determine the rate of heat transfer to the air passing through the combustor, in kW.
PART D only A gas-turbine power generator operates on an ideal air-standard Brayton cycle 1 → 2 → 3 → 4 shown in Fig. 1. The gas temperatures at the compressor inlet, compressor exit, and turbine inlet are T1 = 300 K, T2 = 600 K, and T3 = 1200 K, respectively. Solve PART D below using the variable specific heat assumption PART D - Evaluate the thermal efficiency η of the cycle and the back work ratio rBW = wC/wT.
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rateof 5 m3/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Determine the rate of heat transfer to the air passing through the combustor, in kW.
Air enters the compressor of an air standard Brayton cycle with a volumetric flow rate of 60m3/s at 0.8 bar, 280K. The compressor pressure ratio is 20, and the maximum cycle temperature is 1800k. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. Determine: a) the net power developed, in kW. b) the rate of heat addition in the combustor, in kW. c) the percent thermal efficiency of the cycle
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 90 kPa, 293 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10, and the turbine inlet temperature is 1300 K. The turbine and the compressor each have isentropic efficiencies of 85% and the regenerator effectiveness is 85%. Assume constant specific heats, take k = 1.4 and CP = 1.005 kJ/kgK. 3.2.1 Represent the cycle on a T – s diagram. Calculate: 3.2.2 the thermal efficiency of the cycle, 3.2.3 the back work ratio, and 3.2.4 the net power developed, in kW.
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 27 °C, with a volumetric flow rate of 5 m3/s. The compressor pressure ratio is 5. The turbine inlet temperature is 1127 °C. Assume cold-air analysis, determine the back work ratio.
Analyzing a Regenerative Gas Turbine with Intercooling and ReheatEXAMPLE 9.11 -A regenerative gas turbine with intercooling and reheat operates at steady state. Air enters the compressor at 100 kPa, 300 K with a mass flow rate of 5.807 kg/s. The pressure ratio across the two-stage compressor is 10. Thepressure ratio across the two-stage turbine is also 10. The intercooler and reheater each operate at 300 kPa. At the inlets to the turbine stages, the temperature is 1400 K. The temperature at the inlet to the second compressor stage is 300 K. The isentropic efficiency of each compressor and turbine stage is 80%. The regenerator effectiveness is 80%. Determine: (a) the thermal efficiency (b) the back work ratio (c) the net power developed, (kW).
A gas turbine power plant working on Brayton cycle, Explain the working principle of the cycle with physical diagram as well as P-V and T-s diagrams, and with all the required details
Instead, assume variable specific heat A gas-turbine power plant operates on the simpleBrayton cycle between the pressure limits of 100 and 800 kPa.Air enters the compressor at 308C and leaves at 3308C at amass flow rate of 200 kg/s. The maximum cycle temperatureis 1400 K. During operation of the cycle, the net power outputis measured experimentally to be 60 MW. Assume constantproperties for air at 300 K with cv 5 0.718 kJ/kg·K, cp 51.005 kJ/kg·K, R 5 0.287 kJ/kg·K, k 5 l.4.(a) Sketch the T-s diagram for the cycle.(b) Determine the isentropic efficiency of the turbine forthese operating conditions.(c) Determine the cycle thermal efficiency.