1. For the system shown below, if the mass is 10kg and the stiffness of the spring is 1000N/m, drive the general oscillation equation of the system with a, = 0.1 mm for the following initial conditions: • Case l: y(0) 0.1 mm & y(0) = 0 • Case2: y(0) = 0.1 mm & y(0) = 10 m/s • Case3: y(0) = 0.1 mm & y(0) = -10 m/s Unstretched spring System at rest System in motion b)

1. For the system shown below, if the mass is 10kg and the stiffness of the spring is 1000N/m, drive the general oscillation equation of the system with a, = 0.1 mm for the following initial conditions: • Case l: y(0) 0.1 mm & y(0) = 0 • Case2: y(0) = 0.1 mm & y(0) = 10 m/s • Case3: y(0) = 0.1 mm & y(0) = -10 m/s Unstretched spring System at rest System in motion b)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The following mass-and-spring system has stiffness matrix K. For the mks values, find the two natural frequencies of the system and describe its two natural modes of oscillation. m1 m2 k1 k2 k3 x1 x2 K= −k1+k2 k2 k2 −k2+k3 m1=1, m2=5; k1=3, k2=10, k3=15 Let ω1<ω2be the two natural frequencies. ω1= ω2= (Type exact answers, using radicals as needed.)
question 2 A mass ! hangs on the end of a cord around a pulley of radius 5 and moment of inertia 6, rotating with an angular velocity ,, as shown in the figure below. The rim of the pulley is attached to a spring (with constant 7). Assume small oscillations so that the spring remains essentially horizontal and neglect friction so that the conservation of energy of the system yields: 1 2 !91 + 1 2 6,1 + 1 2 7;1 − !); = =, ?ℎABA , = 9 5 , = = CDE&/, ; = FG&H'5CA!AE/ IBD! AJ(G'GKBG(! Find the natural circular frequency of the system in terms of !, 5, 7,6, and ).
4.12. Figure 4.20 plots the magnitude of the steady-state oscillation of a mass sub- jected to a vibrating base. For some applications, such as an automotive suspension, the magnitude of the response is not the critical factor, but rather the net force to which the mass is subjected. 1. Determine an expression for the force to which the mass illustrated in Figure 4.18 is subjected. 2. Manipulate the expression for the force so that it is in the form of f =−khMfcos(ωt+φ). Explain the interpretation of the term Mf , which is called the force transmissi- bility. Plot Mf as a function of ω/ωn for various damping ratios to make a plot similar to Figure 4.20.
The spring constant of the spring-mass-damper system is k = 5 kN/m, the damping constantcritical value ckr = 200 Ns/m and logarithmic decrement δ = 2. System initial conditionsare x0 = 0 m and v0 = 1 m/s. Determine the damping due to the initial conditionsthe maximum value xmax of the displacement of the characteristic vibration and its moment of occurrence tmax. Specifyresponse, i.e. in this case the values of the variables needed by the station x(t).
A spring-mass-damper system has mass of 80 kg, stiffness of 2500 N/m, and damping coefficient of 250 kg/s Calculate the undamped natural frequency, the damping ratio, and the damped natural frequency Does the solution osciliate?
An object of mass 2 kg is attached to a spring of stiffness 200 N / m on a horizontal frictionless surface . Then it is extend by 10 cm and then let free to oscillate . 1- How long will it take to make one complete oscillation ? 2- Determine the amplitude and give an expression for the displacement as a function of time . 3- Calculate its displacement , velocity , acceleration and force acting on it after sec . 4- Calculate its velocity by the time it is extended by 0.5 cm
How is constant amplitude sustained in forced oscillations?
A 0.600kg mass oscillates at the end of spring that has a spring constant of 300N/m. the initial amplitude is 0.500m . the damping force is proportional to the velocity, -av. If the amplitude decreases from .50m to 350m in 2.50s . What is the damping constant ?Is the system underdamped, critically damped or overdamped?
Consider two springs that are hung in series from a horizontal support. The top-most spring has a spring constant k1 and equilibrium length L1 and the bottom spring has a spring constant k2 and equilibrium length L2. There is a mass M1 connected to both springs where they meet and a mass M2 connected to the bottom of the lower spring. (a) Find the equilibrium positions of M1 and M2.(b) Find the normal mode frequencies of vertical oscillations of M1 and M2 around this equilibrium point.
A washing machine has 60 kg mass, and 15 cm tub radius. Machine dries the unbalanced3 kg laundry by rotating with 1000 rpm.a) What would be the dynamic force transmitted to the foundation if there is no vibrationisolation for the machine?b) An isolation with damping ratio 0.1 is applied to the machine. In this case, if thetransmitted force is decreased by 90 % what would be the natural frequency of the machine?c) In this case, what would be the vibration amplitude of the machine?
A mass of 1.42 Kg is connected to a spring of spring constant 8.71 N/m. An oscillation is started by pulling the mass to the right to amplitude 0.522 m before release and the oscillator moves in air. The oscillation decays to 18.2% of the original amplitude in 58.2 seconds. A=0.241m at 26.38 seconds. a. What would the position of the oscillation be 26.38 seconds after release?
Given an oscillator of mass 2.0kg and spring constant of 180N/m, what is the period without damping? Use numerical methods to model this oscillator with an additional friction force equal to where c is a positive damping constant. Using c=5.0, what is the new period of oscillation. What about for c=10? Assume initial position is 0.2m and initial velocity is zero. Please find the period using the position versus time plot and use the first full cycle of the motion.