1. The difference D between inputs A and B of a half-subtractor is:1. ΔΒ2. AB3. AB2. Half-subtractor is simply a half-adder with:1. INVERTER gate2. AND gate3. XOR gate4. Which method of compliment should be used so that the result of "A-B"= "A+B"1. l's compliment2. 2's compliment3. 3's compliment5. What is binary 1110 in 2's compliment?1. 00102. 00013. 11106. If a half-adder circuit is to be used as a half-subtractor circuit, A is theminuend and B is the subtrahend, which of the following statements is true?1. A must be reversed2. B must be reversed3. No modification required7. The Inputs of a full-subtractor includes:1. Borrow, minuend2. Subtrahend, borrow3. Minuend, subtrahend, borrow8. To convert a full-adder into a full-subtractor, which of these logicgates are required?1. AND gate2. OR gate3. XOR gate

Answered: Image /qna-images/answer/c1e47216-967f-45c0-a9e8-b80f08d226f2.jpg

1. The difference D between inputs A and B of a half-subtractor is: 1. AB 2. AB 3. AB 2. Half-subtractor is simply a half-adder with: 1. INVERTER gate 2. AND gate 3. XOR gate 4. Which method of compliment should be used so that the result of "A-B" = "A+B" 1. l's compliment 2. 2's compliment 3. 3's compliment

1. The difference D between inputs A and B of a half-subtractor is: 1. AB 2. AB 3. AB 2. Half-subtractor is simply a half-adder with: 1. INVERTER gate 2. AND gate 3. XOR gate 4. Which method of compliment should be used so that the result of "A-B" = "A+B" 1. l's compliment 2. 2's compliment 3. 3's compliment

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Using NAND gates AND INVERTERS only, draw the circuit for the following function Y(A,B,C,D) = C'D+A'C'+ABD+BC' ONLY USE NAND GATES AND INVERTERS DON'T USE GATES WITH INVERTED INPUTS.
Using AND gates OR gates and inverters, draw a schematic for the function F = A&B + A&C + B&C. You do not need to minimize the function.(NEED NEAT HANDWRITTEN SOLUTION ONLY OTHERWISE DOWNVOTE )
Most of the following statements are true, but one is not.Which is NOT correct? Select one: a. An inverter is implemented with one transistor b. An inverter is implemented with two different types of transistor c. An inverter connects the output directly to eitherthe high or low power supply d. An inverter is implemented with two transistors
True/False A NAND device has two inputs A, B. The output of that NAND device goes through an Inverter, and the result is called R1. In another part of the design, the same two inputs A, B are first input to Inverters, and their inverted logic is then fed into the inputs of a NAND gate, whose output is R2. Question: Will R1 = R2?
Implementa1-bitfulladdercircuitbyusing4x1MULTIPLEXERandanINVERTER. Data inputs are A, B, Cin and name the outputs as Sum, Cout. (b) Buildfour-bitripplecarryadderusing1-bitfulladderimplementedin(a).
Showing its components and drawing equivalent circuit, design your ownoriginal 1000 W stand-alone (off-grid) solar system. Imagine that a 48 Vlead-acid battery bank will be used and the panels will be placed on the roof ofa house in Antalya. Give numbers for each components, wires, chargecontroller, inverter and solar panels. You are free to connect them in series orparallel, and also you can add them more than one to the system if you desire.You should keep in mind or specify specs the following;Direction of solar panels (Latitude of Antalya: 36.89 and longitude of Antalya:30.71)C-rate, state of charge, depth of discharge for a battery usedThickness of wiresFusesBypass or blocking diodesMMPT charge controllerInvertorSolar panels (power)
1. What is the equation of half adder with inputs X, Y, Z (carry in) and outputs C carry out using a NAND gates. Use the symbol ~ for complement 2. Carry in input is a characteristic of both Half and Full-Adder. (True or False?) 3. Full-adder is simplified using XOR gate. (True or False?) 4. Write the equation of the output D of Half-subtractor using NOR gate. 5. Full subtractor takes 3 inputs in its circuit. (True or False?)
Logic Gates:* 7404LS (NOT)* 7408LS (AND)* 7432LS (OR)* 7400LS (NAND)* 7402LS (NOR)* 7486LS (EX-OR)Or you can use 74HCxx versions.Task 1: 2-to-1 LINE MULTIPLEXER DESIGNA) Write the truth table of 2-to-1 line multiplexer.B) Draw the circuit diagram by using only NAND & NOT GATES.C) Simulate the circuit that you found in part B.
With the following functions use a 4:1 multiplexer(mux) and minimum number of extra gates. Remember that to create the inverse of an input variable (i.e., A’, B’, etc.), you need to use an inverter. Hint:remember that you may need to try different variables on the select lines (i.e., A and B, or B and C, or A and C) to find the solution with the minimum number of extra gates. Implement each of the functions from from the above question using a 2:1 multiplexer(mux) and a minimumnumber of extra gates. Hint:remember that you may need to try different variables (i.e., A or B or C) on the select line to find the solutionwith the minimum number of extra gates. please explain in detail with a truth table as well as the schematics using a MUX.
A building use 3 phase inverter with SVPWM algorithm to back up power in case of electric cut out, where v=311.12 sin 2pi 50 t. Find T1, T2 and To at t=16 msec. Use Ts= 100 us
Please, can you complete the rest of the questions? Thank you very much, have a nice dayز e) Circuit diagram & IC pin numbers f) Using AND, OR, and Inverters, find the minimum network to realize the above network. (It may be more than two levels) g) Realize the above network using 2-inputs NAND gates only. h) Realize the above network as a 3-levels NOR gate network.
Those are inverters Label all gate outputs with arbitrary symbols but with meaningful names. Determine the number of initial inputs, final outputs, and arbitrary outputs of the circuit. Exclude inverters as arbitrary output for this one. (Ex. Initial inputs = 1, Final outputs = 1, Arbitrary outputs = 3). Obtain the Boolean Function for each gate outputs. (ex. T1 = A + B, T2 = ABC, Sout = T1 XOR T2, Carry = A' + T1) Obtain the truth table of the whole circuit. By examining the truth table, determine the functionality of this circuit. What does it do?