1.20 m wide is mounted on the vertical wall of an open rectangular tank filled with oil. The top of the gate is 1.2 m below the surface of oil. What is the minimum force F applied at the top edge of the gate required to keep it close assuming the gate

1.20 m wide is mounted on the vertical wall of an open rectangular tank filled with oil. The top of the gate is 1.2 m below the surface of oil. What is the minimum force F applied at the top edge of the gate required to keep it close assuming the gate

Name: A rectangular gate 1.8 m high by 1.20 m wide is mounted on the vertica
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A rectangular gate 1.8 m high by 1.20 m wide is mounted on the vertical wall of an open rectangular tank filled with oil. The top of the gate is 1.2 m below the surface of oil. What is the minimum force F applied at the top edge of the gate required

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
A cylindrical tank of 1.5 m diameter and height 0,75 m has a hemispherical dome. The tank contains oil of relative density 0.84. The dame is joined to cylinder position by four equally spaced bolts. If pressure gauge at point M, 0.3 m above base of tank read 50 kPa. Determine force each bolt.
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM)
A 15-ft-long, 6-ft-high rectangular tank open to the atmosphere is towed by a truck on a level road. The tank is filled with water to a depth of 5 ft. Determine the maximum acceleration or deceleration allowed if no water is to spill during towing.
A block with specific gravity of SG= 1.45 and volume V= 0.75m3, is attached to a spring scale. The block is hung vertically such that it is fully submerged in oil ρoil= 0.85kg/m3 . a) Draw a free body diagram for the block. b) What is the apparent weight of the block?
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure.
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2. (With Free Body Diagram)
A gate which is hinged at O with a constant width of 5m and water depth of 4m to the right of the gate.determine the magnitude of hydrostatic force required to maintain the gate in equilibrium
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure and detailed solution.
A tiny steel cube is suspended in water by a string. If the lengths of the sides of the cube are very small, how would you compare the magnitudes of the pressures on the top, bottom, and side surfaces of the cube?
A semicircular gate with a diameter of 6 ft is installed at 50º as shown below. The top of the gate is 5 ft below the water surface. Determine the resulting hydrostatic force and the location of the center of pressure on the gate.