A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM

A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM

Name: A 3 m diameter , 7 m long cylindrical tank is completely filled with w
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2. (With Free Body Diagram)
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2.
two vertical parallel glass plates 0.1 mm apart are partially immersed in water. Considering that the water does not reach the upper edges of the sheets and that the liquid completely wets the glass, determine: a) the height that rises in the flat capillary, b) the attractive force between the plates. Consider the width of the sheet l=12cm and density y=72.8*10^-3 N/m
A 30-cm-diameter, 10-cm-high vertical cylindrical vessel equipped with a vertical tube at the edge is rotated about its vertical axis at a constant angular velocity of 15 rad/s. If the water rise in the tube is 30 cm, determine the net vertical pressure force acting on the vessel.
A 3-m-diameter, 7-m-long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with the 7-m-long axis being horizontal. Determine the pressure difference between the front and back ends of the tank along a horizontal line when the truck (a) accelerates at 3 m/s2 and (b) decelerates at 4 m/s2.
A 15-ft-long, 6-ft-high rectangular tank open to the atmosphere is towed by a truck on a level road. The tank is filled with water to a depth of 5 ft. Determine the maximum acceleration or deceleration allowed if no water is to spill during towing.
An open tank 5m long, 2m deep and 3 m wide contains oil of relative density 0.9 to a depth of 0.9 m. If the tank is accelerated along its length on a horizontal track at a constant value of 3 m/s2 , determine: (i) The new positon of the oil surface. (ii) The pressures at the bottom of the tank at the front and rear edges. (iii) The amount of spill if the tank is given a horizontal acceleration of 4.5 m/s2 instead of 3 m/s2 .
An open cylindrical vessel 60cm in diameter and 1.20m high contains water to a depth of 1m. If it is rotated about its vertical axis, determine the angular velocity w if: a)The water surface just touches the edge of the open top without spillage.
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.
A tube with diameter of 0.3cm is inserted into water (Surface tension= 0.061N/m). The water in the tube rises to a height of 0.45cm from the surface. Calculate the contact angle between the water and the tube.
An open tank containing water is accelerated vertically at 5.8 If the motion is downward with positive acceleration, determine the pressure (kPa) 1.85 m below the surface.
A 30-ton, 4-m-diameter hemispherical dome on a level surface is filled with water. Someone claims that he can lift this dome by making use of Pascal’s law by attaching a long tube to the top and filling it with water. Determine the required height of water in the tube to lift the dome. Disregard the weight of the tube and the water in it