131.6 The floor system of a gymnasium consists of a 130-mm-thick concrete slab resting onfour steel beams (A = 9100 mm2) that, in turn, are supported by two steel girders (A25600 mm2), as shown in Fig. 2.3. Determine the dead loads acting on beam BF and girder%3DAD.Steel floor beam(A = 9,100 mm²)Steel girder (A 25,600 mm2)SteelcolumnB130 mm10 mconcreteslabG3 at 5 m 15 m

From the table of Unit weight of materials, we get Unit weight of concrete Unit weight of structural…

1.6 The floor system of a gymnasium consists of a 130-mm-thick concrete slab resting on four steel beams (A = 9100 mm²) that, in turn, are supported by two steel girders (A 25600 rmm), as shown in Fig. 2.3. Determine the dead loads acting on beam BF and girder AD. Steel floor beam (A = 9,100 mm2). Steel girder (A = 25,600 mm2) A D. Steel column 130 mm 10 m concrete slab E 3 at 5 m 15 m

1.6 The floor system of a gymnasium consists of a 130-mm-thick concrete slab resting on four steel beams (A = 9100 mm²) that, in turn, are supported by two steel girders (A 25600 rmm), as shown in Fig. 2.3. Determine the dead loads acting on beam BF and girder AD. Steel floor beam (A = 9,100 mm2). Steel girder (A = 25,600 mm2) A D. Steel column 130 mm 10 m concrete slab E 3 at 5 m 15 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 10P

See similar textbooks

Similar questions

The floor system of a gymnasium consists of a 130-mm-thick concrete slab resting on four steel beams (A = 9,100 mm^2)that, in turn, are supported by two steel girders (A = 25,600 mm^2), as shown in the figure. Determine the dead loads acting on beam BF and girder AD.
The floor system of an apartment building consists of a 100-mm-thick reinforced concrete slab resting on three steel floor beams, which in turn are supported by two steel girders, as shown in the Figure. The areas of cross section of the floor beams and the girders are 11,800 mm^2 and 21,100 mm^2, respectively. Determine the dead loads acting on the beam CD and the girder AE.
The floor system of a building consists of a 5 in. thick reinforced concrete slab resting on four steel floor beams, which in turn are supported by two steel girders, as shown in Fig. 2.7(a). The cross-sectional areas of the floor beams and the girders are 14.7 in and 52.3 in , respectively. Determine the dead loads acting on the beams CG and DH and the girder AD.
The floor system of an apartment building consists of a 4-inch-thick reinforced concrete slab resting on three steel floor beams, which are in turn supported by two steel girders, as shown below. The areas of cross section of the floor beams and the girders are 18.3 in.2 and 32.7 in.2, respectively. Determine the dead load acting on the beam CD if a 6-inch-thick brick wall, which is 7 ft high and 25 ft long, bears directly on the top of beam CD.
The floor of a building, shown in Fig. 2.6(a), is subjected to a uniformly distributed load of 3.5 kPa over its surface area.Determine the loads acting on all the members of the floor system.
The floor system of an apartment building consists of a 4-inch-thick reinforced concrete slab resting on three steel floor beams, which are in turn supported by two steel girders, as shown below. The areas of cross section of the floor beams and the girders are 18.3 in.2 and 32.7 in.2, respectively. Determine the live load acting on beam CD.
Question 1) in FIG loading condition is given beam F force F = 65 kN , first distributed load W 1 = 41 kN / m , w 2 distributed load w 2 = 51 kN / m , θ angle θ = 48 ° and L length of L = 5 m . According to this; Question 1-A) B at the point y direction ( B y ) Determine the support reactions. Question 1-B) to the point in y direction ( A y ) Determine the support reactions. Question 1-C) to the point in x direction ( A x ) Determine the support reactions.
The roof system of an office building consists of a 4-in.- thick reinforced concrete slab resting on four steel beams (A ¼ 16:2 in.2), which are supported by two steel girders (A = 42:9 in.2). The girders, in turn, are supported by four columns, as shown in Fig. P2.8. Determine the dead loads acting on the girder AG.
The floor system of a gymnasium consists of a 130-mm-thick concrete slab resting on four steel beams (A=9,100 mm2) that, in turn, are supported by two steel girders (A=25,600 mm2), as shown below. Determine the point load acting on girder AD at point C.
After a severe rainstorm, the ﬂat roof of the building shown in Fig. (a) is covered by 2.5 in. of rainwater. The speciﬁc weight of water is 62.4 lb/ft3, so water at a depth of 2.5 in. causes a uniform pressure of 62.4(2.5/12)= 13 lb/ft2 . Determine the resultant force that the water exerts on the roof
determine the resultant of the forces : A = 800N at 40degrees , B=600N at 160degrees and C=200N at 300 degrees
Calculate the natural frequency of the shear wall carrying concentrated masses at the floor levels of a three-story building as shown in Fig. P21.12. Assume that the deflection shape of the shear wall is that resulting from a concentrated lateral force applied at its tip. Take flexural rigidity, EI=30×10 11 lb⋅in 2 ; length L=36ft .; concentrated masses, m=100lb . sec 2 /in and mass per unit of length along the wall, m ˉ =10lb⋅sec 2 /in 2 .