Solve for the Resultant of the six loads on the truss shown the loads are given in Kips ( K ) ( 1 Klp = 1000lbs ). Three loads are vertical the wind loads are perpendicular to the side. The Truss is symmetrical. 12K 10K10K 20K15K7KSolve for the resultant of the six loads on the truss shownThe loads are given In kips (K)(I klp = 1000lbs ). Three loads are vertical.The wind loads are perpendicular to the alde. The truss is symmetrical.

Answered: Image /qna-images/answer/0c0c5b09-456e-4abb-b99f-3781462495a2.jpg

12K 10K 10к 20к 15K 7K Solve for the resultant of the six loads on the truss shown The loads are given In kips (K)(I klp = 1000lbe ). Three loads are vertical. The wind loads are perpendicular to the side. The truss is symmetrical.

12K 10K 10к 20к 15K 7K Solve for the resultant of the six loads on the truss shown The loads are given In kips (K)(I klp = 1000lbe ). Three loads are vertical. The wind loads are perpendicular to the side. The truss is symmetrical.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A reinforced concrete beam has a width of 425mm and an effectivedepth of 900mm. The longitudinal bars at compression side are 4-25mm dia. and 2layers of 4-32mm dia. at tension side. Concrete strength f’c=27.60 MPa and fy=420.4) Calculate the Transformed moment of Inertia.5) Calculate the moment capacity of the section.6) Calculate for the safest uniform load that can carry by the beam if ihas a lengthof 10m.
The main beam of UB 610 x 229 x 101 kg/m in steel grade S275 supportssecondary beamsof UB 406 x 140 x 39 kg/mon its top flange.The schematic diagram of the floor supported by the beams is presented in Figure 1. b)The slab floor is reinforced concrete 150 mm thickwith 50 mm screed on top of it. The slab floor carriesthe uniform distributed load of 400 kg/m2.Calculate the ULS load on the secondary beam. 4xxx= 4715 1xxx= 1715 50xx= 5015
A reinforced concrete beam has a width of 400mm and an effective depth of 600mm. It is reinforced for tension with 4-28mm rebars. F'c = 20.7MP and Fy = 414.6MPa. 7. Determine the ultimate moment capacity. a 484.76KN.m b. 448.67KN.m 8. Determine the percent increase in ultimate b. 34.4% a. 25.1% c. 487.46KN.m d. 446.87KN.m moment if depth is increase to 700mm. c. 18.98% 15.68%
Determine support reaction. Given a=5 m b=10 m P=30 KN
Determine support reaction. P=800 lb , a=5 ft b=9 ft
A steel beam having a simple span of 8 m. is subjected to a clockwise moment M at the left end and 25% of M (counter clockwise) at the right end. The steel section has the following properties. Fy = 248 MPa rt = 0.053 m d = 0.533 m bf = 0.210 m tf = 0.016 m Sx = 0.00206 m^3 1. Compute for the maximum slenderness ratio of the beam which is considered as long beam. 2. Compute the allowable bending stress in the compression flange. 3. Compute for the value of the moment at the left end.
A cantilever beam has a span of 4 m and carries a uniformly distributed load throughout its span. bf = 0.210 m Sx = 0.002077 m3 d = 0.533 m rt = 0.053 m tf = 0.016 m Fy = 248 MPa a. Compute the allowable bending stress. b. Compute the maximum uniform load that can be carried by the beam.
2. The beam AB shown is supported at A and B. the beam is loaded with three fixed concentrated loads and an overhead hoist carrying a load W. P1 P2-320 KN. P3-200 KN and W-500 KN A. Find the distance of W from A in meters if the resultant of the external loads is at the midspen B. What is the reaction at A when W is at midspan?
For the given continuous beam. 1. Which of the following gives the fixed end moment at C for the triangular loads alone. a. 3800 N•m b. 4800 N•m c. 6200 N•m d. 7500 N•m 2. Which of the following gives the distribution factor for member BA? a. 0.20 b. 0.30 c. 0.40 d. 0.50 3. Which of the following gives the moment at B? a. 6510 N•m b. 4810 N•m c. 8724 N•m d. 7092 N•m
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 14100 ksi] rods, and a solid steel [E = 30100 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.8 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.49 in. Assume L1=31 in and L2=61 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 18 kips is applied.
A 6-m simply supported reinforced concrete rectangular beam is 250 mm wide. The total depth is 400 mm and its effective depth is 340 mm. It is reinforced for tension only with 4-28mm diameter bars. It carries a total dead load of 21.6 kN/m including its weight. Fy = 350 MPa and f’c = 20.7 MPa. 1. Compute the distance of the neutral axis from the top most fiber. a. 195.98 mm b. 230.56 mm c. 186.01 mm d. 218.84 mm 2. Which of the following gives the ultimate moment capacity of the beam? a. 202.09 kN.m b. 181.88 kN.m c. 171.4 kN.m d. 186.2 kN.m 3. Which of the following most nearly gives the unfactored uniform live load capacity using the load combination 1.2D+1.6L? a. 40.42 kN/m b. 15.38 kN/m c. 9.06 kN/m d. 3.84 kN/m
Refer to the beam loaded as shown. (a)What is the Value of horizontal reaction at the fixed support?(b)What is the value of resulting couple at A?