2. The following results were obtained from liquid limit and plastic limit tests conducted on the soil from Question 1. Please: a. Draw the flow curve and determine the liquid limit. b. Calculate the plasticity index. c. Comment on the results obtained. Liquid Limit Test No. Number of Blows, Moisture Content (%) 186 N 1 34 2 26 22 143 109 4 14 80 67 9. Plastic Limit Moisture Content (%) 34.5 37.6 35.3 36.8 Test No. -234

2. The following results were obtained from liquid limit and plastic limit tests conducted on the soil from Question 1. Please: a. Draw the flow curve and determine the liquid limit. b. Calculate the plasticity index. c. Comment on the results obtained. Liquid Limit Test No. Number of Blows, Moisture Content (%) 186 N 1 34 2 26 22 143 109 4 14 80 67 9. Plastic Limit Moisture Content (%) 34.5 37.6 35.3 36.8 Test No. -234

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.5P: The following data were obtained by conducting liquid limit and plastic limit tests on a soil...

See similar textbooks

Similar questions

The laboratory consolidation test is conducted on a clay sample. The following data results were obtained P1 =55 kPa P2 = 130 kPa e1= 0.95 e2= 0.80 Thickness of the sample of clay= 35mm Time for 50% consolidation = 3.0 min Tv= 0.197 a. Find the coefficient of volume compressibility b. Determine the coefficient of consolidation if a sample of clay was drained on both sides c. Compute the hydraulic conductivity of the clay
ANSWER MUST BE: (a) t50 = 8.37 years, (b) t90 = 35.96 years, (c) U ≈ 17%, (d) U ≈ 39% A clay specimen was tested in a laboratory consolidation device, whichwas 12.7 mm (½ in.) thick and the top and the bottom boundaries weredrained. A 50% consolidation time on the specimen was obtained as28.4 minutes. Determine the following:(a) Time for 50% consolidation in the field with this soil with a 2.5 mthickness where only the top layer is drained (b) Time for 90% consolidation in the field with this soil with a 2.5 mthickness where only the top layer is drained (c) For the same field condition above, at the end of 1 year after theplacement of load, how much primary consolidation settlementoccurs relative to its final amount of the settlement? (d) The same question as in (c), but at the end of 5 years
Subject: Soil Mechanics Please provide a solution and a diagram For a laboratory consolidation test on a clay specimen (drained on both sides) the following results were obtained: Thickness of clay soil= 25 mm; P_1 = 50 kPa; P_2 = 120 kPa; e_1 = 0.92; e_2 = 0.78; Time for 50% consolidation= 2.5 min. Tv = 0.197. Determine the hydraulic conductivity of the clay for the loading range in m/min. a. 1.081 x 10^-3 b. 2.56 x 10^-2 c. 1.31 x 10^-7 d. 1.23 x10 ^-5
During a falling head test, the head fell from 80cm to 65cm in 83 seconds. The specimen was 5cm in diameter and had a length of 100mm. the diameter of the standpipe was 0.80 cm. Temperature during the test is 90deg. C. a.) Compute the coefficient of permeability of the soil at 20deg. C _____cm/min b.) Compute Seepage velocity if the void ratio is 0.90 _____cm/min c.) Determine the Rate of flow _____cm/min
Coefficient Permeability of Soil A falling head permeability test is conducted on silty soil. The sample diameter is 10.0 cmand its length or thickness is 7.8 cm. The diameter of the standpipe is 6.0 mm. The head at thestart of the test is 47.8 cm. The test lasts 8.5 min and the head falls to 22.6 cm. Find thecoefficient of permeability of this soil in cm/s? Provide step by step solution.
A block of soil in a permeability test has a length of 120 mm and a cross-sectional area of 600 mm2. The water level at one end is 200 mm above a fixed datum and at the other end is 30 mm above the same plane. The flow rate was 2 ml in 90 seconds. Compute the coefficient of permeability of the soil in m/s. a.2.61 x 10-5 m/s b.0.98 x 10-5 m/s c.1.78 x 10-5 m/s d.3.97 x 10-5 m/s e.1.89 x 10-5 m/s
From the constant head permeability test arrangement shown, the following values are given: Void ratio of specimen = 0.46 Length of Soil Sample = 450mm Constant head difference = 700mm Water collected in a period of 3 min = 0.000354 m3 Cross-sectional Area of Soil Sample = 0.00226 m2 Determine the coefficient permeability in m/hour (Ans: 2.102 m/hr) Compute the discharge of velocity in m/min. (Ans: 0.052 m/min) Compute the seepage velocity in m/min. (Ans: 0.165 m/min)
Problem: For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen - 16 cm Diameter of specimen - 9.6 cm Constant head difference - 50 cm Volume of water collected in 4 min - 420 cc Void ratio of the soil specimen - 0.55 A.) Determine the hydraulic conductivity of the soil in cm/sec B.) Determine the discharge velocity in cm/sec C.) Determine seepage velocity in cm/sec Problem: For a falling head permeability test, the following are given: Length of Soil Specimen - 200mm Area of Soil Specimen - 1000mm^2 Area of Stand pipe - 40mm^2 Head Difference at time t = 0 min - 500mm Head Difference at time t = 3 min - 300mm A.) Compute hydraulic conductivity of the soil in cm/sec B.) Compute the seepage velocity if the porosity is 0.25 in cm/sec C.) What is the head difference at time t = 100 sec in mm
A sand cone in place unit test was conducted on the field during the construction of the embanklment in CALAX. The following data were obtained in the field: Moisture content of soil from the test hole+ 12.8% ; Weight of sand to fill the funnel(cone) = 320g; Weight of weight soil from the test hole= 750g; Unit weight of sand= 15.4 kN/m3 and Weight of sand used to fill the test hole and thefunnel of sand-cone device=870 g. Compute for the dry unit weight of the compacted soil in kN/m3. a.17.80 b.18.74 c.20.08 d.21.14
Q1: A clay specimen was tested in a laboratory consolidation device, which was 12.7 mm thick and the top & bottom boundaries were drained. A 50% consolidation time on the specimen was obtained as 28.4 minutes, Determine the Following: a- The time for 50% consolidation in the field with a 2.5 m thickness where ‘only the top layer is drained. b- The time for 90% consolidation in the field with a 2.5 m thickness where only the top layer is drained. c- For the same field condition above, find the settlement after 1year, if the final consolidation settlement = 0.0345 m.
FUNDAMENTALS OF GEOTECHNICAL ANALYSIS A constant head permeability test is performed on soil that is 2 cm x 2 cm square, and 2.5cm long. The head difference applied during the test is 20 cm and 7 cm3 is collected over a time of 100 sec. Provide step by step solution. a) Compute the permeability based on these test conditions and results. b) A falling head test is conducted on the same soil specimen at the same time (t1 – t2 = 100 sec), and the standpipe diameter is 0.8 cm. If the average head during the test should be 18 cm, what are h1 and h2 values?
In an Oedometer test, the void ratio of a clay decreased from 0.652 to 0.51 under change in effective pressure from 60 KPa to 130 KPa. Under two-way drainage (for the same test) it was found that the required time to achieve 50% tso consolidation was 12 mins with the sample of thickness 12mm. Find the coefficient of permeability of the clay for the given stress range. No wrong answers please i will downvote and box the final answer