3- In an air standard Brayton cycle, the pressure ratio is 6. The condition of air at the beginning of compressionis 1 bar, 300 K. Air fuel ratio is 60: 1. The calorific value of fuel is 42 kJ/kg. Determine (a) Maximum temperature; (b)Work ratio; (c) Net work; (d) th Answers: [(a) 1197.41 K, (b) Work ratio = 0.58197, (d) nth = 0.40066]

3- In an air standard Brayton cycle, the pressure ratio is 6. The condition of air at the beginning of compressionis 1 bar, 300 K. Air fuel ratio is 60: 1. The calorific value of fuel is 42 kJ/kg. Determine (a) Maximum temperature; (b)Work ratio; (c) Net work; (d) th Answers: [(a) 1197.41 K, (b) Work ratio = 0.58197, (d) nth = 0.40066]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. In an ideal air-standard Otto cycle, the initial conditions are 1 bar and 300 K. The compression ratio is 12:1, and the maximum cycle temperature is 2500 K. Assuming cp = 1.004 kJ/kg-K & k = 1.4, find: (a) show the cycle in both P-v and T-s diagrams. Clearly label all states and energy transfers. (b) temperature at the end of compression, T₂ in K. (c) heat added during the combustion process in kJ/kg. (d) thermal efficiency of the cycle. (e) net work output from the cycle in kJ/kg.
Air enters the compressor of an ideal air-standard Brayton cycle at 110 kPa, 289 K, with a volumetric flow rate of 5 m3/s. The compressor pressure ratio is 12:1. The turbine inlet temperature is 1567 K. Take the gas constant as 289 J/kg.K and Specific heat at constant pressure and constant volume for air as 1.004 kJ/kg K and 0.708 kJ/kg K respectively. Calculate the net power developed to two decimal places and include the correct SI unit symbol.
Air enters the compressor of an ideal air standard Brayton cycle at 100 kPa, 290 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1500 K. If a regenerator with an effectiveness of 70% is incorporated in the cycle, determine (i)turbine work, (ii) compressor work, (iii) heat supplied, and (iv) the efficiency of the cycle. Draw a suitable block diagram and T-s diagram. Take Cp=1.005 kJ/kg K and ϒ= 1.4
At the beginning of the compression process of an air-standard Otto cycle, P1=1bar, T1=290K, V1=400cm3. The maximum temperature in the cycle is 2200K and the compression ratio is 8.00. Determine the (a) heat addition, in kJ, (b) ????, in kJ, (c) thermal efficiency, and (d) mean effective pressure, in kPa. Consider the cycle as a model of the processes in each cylinder of a spark-ignition engine. Determine the (e) net power output, in kW, if the engine has four cylinders and the cycle is repeated 1200 times per minute in each cylinder. Note that the specific heats are NOT constant.
Consider a cold air-standard Diesel cycle. Operating data at principal states in the cycle are given in the table below. The states are numbered as in Fig. 9.5 with p1 = 100 kPa, T1 = 340 K, and T3 = 4850.3 K, r = 15 and rc = 2. For n = 1.3, cv = 0.718 kJ/(kg-K), and cp = 1.005 kJ/(kg-K), determine p2 in bar. determine T4 in deg-C. determine T2 in deg-C. determine the heat transfer during heat addition process per unit mass in kJ/kg.
At the beginning of the compression process of an air-standard Otto cycle, P1=1bar, T1=290K, V1=400cm3. The maximum temperature in the cycle is 2200K and the compression ratio is 8. Determine the (a) heat addition, in kJ, (b) ????, in kJ, (c) thermal efficiency, and (d) mean effective pressure, in kPa. Consider the cycle as a model of the processes in each cylinder of a spark-ignition engine. Determine the (e) net power output, in kW, if the engine has four cylinders and the cycle is repeated 1200 times per minute in each cylinder. Also, (f) show the T-s and P-? diagrams. Note that the specific heats are NOT constant.
Air enters the compressor of an ideal air-standard Brayton cycle at 80 kPa, 299 K, with a volumetric flow rate of 6.1 m3/s. The compressor pressure ratio is 7. The turbine inlet temperature is 1886 K. Adopting the cold air-standard assumption, calculate: the mass flow rate of air to 3 d.p. in SI unit and privide unit symbol. Take the gas constant as 289 J/kg.K
At the beginning of compression in an air-standard Diesel cycle, p1 = 96 kPa, V1 = 0.016 m3, and T1 = 290 K. The compression ratio is 15 and the maximum cycle temperature is 1290 K. Determine (a) the mass ofair, in kg. (b) the heat addition and heat rejection per cycle, each in kJ. (c) the net work, in kJ, and d) the thermal efficiency. (e) Solve the problem on a cold air-standard basis with constant specific heats.
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 90 kPa, 293 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10, and the turbine inlet temperature is 1300 K. The turbine and the compressor each have isentropic efficiencies of 85% and the regenerator effectiveness is 85%. Assume constant specific heats, take k = 1.4 and CP = 1.005 kJ/kgK. 3.2.1 Represent the cycle on a T – s diagram. Calculate: 3.2.2 the thermal efficiency of the cycle, 3.2.3 the back work ratio, and 3.2.4 the net power developed, in kW.
At the beginning of the compression process in an air standard dual cycle, P1 = 1 bar and T1 = 300 K. Qin is 1000 kJ/kg.Consider compression ratio ranging from 10 to 20. Determine v1 and v2
Air enters the compressor of an ideal air-standard Brayton cycle at 106 kPa, 281 K, with a volumetric flow rate of 1577 m3/s. The compressor pressure ratio is 13. The turbine inlet temperature is 1577 K. Take Specific heat at constant pressure and constant volume for air as 1.006 kJ/kg K and 0.717 kJ/kg K respectively. Calculate the work ratio of the plant to one decimal place and include the correct unit (percentage). Us cold air standard assumption.
Sketch the Brayton cycle . Air enters the compressor of the cycle at 1 bar and 25 °C. Pressure after compression is 3 bar. Temperature at turbine inlet is 650 °C. Determine per kg of air a. Cycle efficiency, b. Heat supplied to air c) Work available,