3. A beam simply supported on a 12-m span carries a uniformly distributed load of 30 kN/m over the middle 6 m. Using an allowable stress of 130 MPa, determine the lightest suitable beam. What is the actual maximum stress in the selected beam? (Shear and moment diagram are optional) 30 kN/m -3m- -3m- Ḥ 6 m

3. A beam simply supported on a 12-m span carries a uniformly distributed load of 30 kN/m over the middle 6 m. Using an allowable stress of 130 MPa, determine the lightest suitable beam. What is the actual maximum stress in the selected beam? (Shear and moment diagram are optional) 30 kN/m -3m- -3m- Ḥ 6 m

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter14: Sheet-pile Walls

Section: Chapter Questions

Problem 14.11P

See similar textbooks

Similar questions

A simply supported 4-m long beam is made up of 80% grade Malugai. The beam is carrying a uniform load of 10 KN/m all through out its length and a concentrated load of 500 N at the midspan. The cross-sectional area of the beam is indicated below. What is the actual bending stress of the beam in MPa? (use two decimal places, no need for unit) What is the actual shearing stress of the beam in MPa? (use two decimal places, no need for unit)
Given: Mmax= 15.625 kN-m Vmax= 12.5 kN Depth of the beam= 250 mm 1. A simply supported 5 meter timber beam carries a 5 kN/m uniformly distributed load. If the beam's Ix is 260.4166 x 10^6 mm^4 and fb = 7.50 MPa, what is the base of the beam? a) 150 mm b) 180 mm c) 200 mm d) 220 mm 2. The shear stress fv developed for the beam of question 1 is a) 0.375 MPa b) 0.50 MPa c) 0.75 MPa d) 0.85 MPa
Determine the normal stress in each of the cables? (MPa) a. 85.7 b. 75.7 c. 65.7 d. 55.7 If the cables elongated by 1 mm, what is the vertical displacement of the precasat slab? (mm) a. 1.758 b. 1.658 c. 1.458 d. 1.558 What is the tensile force in each of the cables? (kN) a. 5.98 b. 4.98 c. 7.98 d. 6.98 SOLVE ALL AND WILL GET A LIKE <3 ps: unit weight of concrete is 24kn/m^3
A rectangular beam has a dimension of 210 mm x 260 mm. The simply supported beam is 5-m long and carries a concentrated load of 25 KN at the midspan. What is the maximum flexural stress of the beam? Blank 1 (use two decimal places)
A simply supported rectangular beam of length 6.45m has a width of 437.5 and an effective depth of 692.5. The beam is to be reinforced using 12 mm bars. The beam supports service dead loads of 31 kN/m and 39.5kN/m., respectively. the fc' is 28MPa, fy is 420MPa and Wu is 89.9kN/m. 1. what is the ultimate moment capacity of the beam? 2. what is the height of the equivalent stress block? 3. Determine the number of bars required for this beam
A beam that rests on supports 3 m apart carries a load of 10 kN uniformly distributed. The beam is rectangular in section 7.5 cm deep. How wide should it be if the skin stress must not exceed 60 MN/m^2? (RNEC)
A 5-m simply-supported beam supports a uniformly distributed load equal to 40 kN/m applied throughout the beam. What is the maximum flexural stress if the beam has a rectangular cross-section with b = 300 mm and h = 600 mm? (in MPa) answer in 3 decimal places
The cantilever beam has a circular cross section of 263 mm diameter. If the working bending stress is 199 MPa, determine the largest allowable intensity wo of the uniformly distributed load that can be applied to the beam. Round your answer to 2 decimal places.
A simply supported rectangular beam of length 6.45m has a width of 437.5 and an effective depth of692.5. The beam is to be reinforced using 12 ?? bars. The beam supports service dead loads of31 kN/m and 39.5kN/m., respectively. 1. Calculate the ultimate moment capacity of the beam.2. Calculate the height of the equivalent stress block.3. Determine the number of bars required for this beam
Completely solve and box the final answer. Illustrate the problem. Write legibly 2. A cantilever beam 3 m long supports a uniform load of 4.5 kN/m and a concentrated load of 3.4 kN at the end. Determine the minimum diameter of the beam with a flexural stress of 12.5 MPa and a shearing stress of 1.4 MPa. For this question, round off to the nearest multiple of 25 mm.
A beam simply supported on a 8 m span carries a uniformly distributed load of 30 kN/m over the middle 5 m. Using an allowable stress, fb=120Mpa, determine the most economical W shape beam, with the condition that the depth of the beam should not exceed 500 mm W 460 x89 . What is the actual stress in the selected beam?
As shown in the figure below, determine the internal loadings at points A,B and. Consider the uniform weight of thewhole structure which is SN lbs per ft complete solution and drawing. if u can please add some explanation thankyou FN = 49 MN = 101 SN = 94