3. Air occupies a 0.3 m³ piston-cylinder at 150 kPa and 278 K. The piston-cylinder operates on a three-process cycle where from state 1 to state 2 the pressure constant and V2 = 1.4 V1. From state 2 to 3 the compression is reversible adiabatic until V3 = V1, and the temperature at state 3 is 450 K. A constant-volume process completes the cycle. Sketch the cycle on a p-V diagram and determine the network and heat flows for the cycle.

3. Air occupies a 0.3 m³ piston-cylinder at 150 kPa and 278 K. The piston-cylinder operates on a three-process cycle where from state 1 to state 2 the pressure constant and V2 = 1.4 V1. From state 2 to 3 the compression is reversible adiabatic until V3 = V1, and the temperature at state 3 is 450 K. A constant-volume process completes the cycle. Sketch the cycle on a p-V diagram and determine the network and heat flows for the cycle.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water is compressed adiabatically, but inefficiently, from p1 = 150 kPa and T1 = 160 ∘C to a pressureof p2 = 700 kPa. A throttle valve is connected to the outlet of the compressor and has a temperature reading atits outlet of T3 = 440 ∘C at atmospheric pressure (1 bar). If the compressor operates at steady state, stray heattransfer can be neglected, and the changes in kinetic and potential energy are negligible, determine the isentropicefficiency of the compressor, in percent.
At the beginning of a cycle using air, the pressure, volume and temperature are 550 kN/m 2 , 0.025 m 3 and 15°C, respectively. The air is heatedat constant pressure until the temperature is 204°C. It is then expanded adiabatically until the temperature becomes 120°C. The air is cooled atconstant volume to a temperature of 15°C then restored to its original volume by isothermal compression. (a) Draw the pressure volume and temperature entropy diagram.(b) Determine for the cycle, the heat received,(c) the work done,(d) the thermal efficiency, Take Cp =1.00 kJ/kgK, Cp /Cv =1.4
hown below is P-V diagram for a reversible cycle enclosed by 4 reversible process curves. The curve 1-2 and the curve 3-4 are reversible isothermal processes, and the curve 2-3 and the curve 1-4 are reversible adiabatic processes. If the cycle direction is counter clockwise, answer the question below. Select curve(s) which represent process(es) that the system was compressed?____ A. curve 1-4 B. curve 2-3 C. curve 1-2 D. curve 3-4
An ideal gas, initially at 30°C and 100 kPa, undergoes the following cyclic processes in a closed system: (a) In mechanically reversible processes, it is first compressed adiabatically to 500 kPa, then cooled at a constant pressure of 500 kPa to 30°C, and finally expanded isothermally to its original state. (b) The cycle traverses exactly the same changes of state, but each step is irreversible with an efficiency of 80% compared with the corresponding mechanically reversible process. Note: The initial step can no longer be adiabatic. Calculate Q, W, ∆U, and ∆H for each step of the process and for the cycle. Take CP = (7/2)R and CV = (5/2)R.
The turbine with a 4.85 kg/s mass flow rate is initially in the state where h1 = 3221 kJ/kg, u1 = 2925 kJ/kg, P1 = 2.6 MPa, T1 = 393.2 °C and s1 = 6.972 kJ/(kg·K). Steam is exhausted at a state where h2 = 2343 kJ/kg, u2 = 2206 kJ/kg, P2 = 25 kPa, T2 = 64.97 °C, x2 = 0.9012 and s2 = 7.146 kJ/(kg·K). If the 41 kW of heat leaks from the system, what is the turbines power output?
In order to analyze an internal combustion engine, consider an ideal gas with constant specific heats (Cv = 4.18 J / g ∙ K) that performs a thermodynamic cycle, with adiabatic compression from V1 to V2, with the addition of heat at constant volume from state 2 to state 3, an adiabatic expansion from V3 = V2 to V4 = V1 and a constant volume cooling until reaching the original state. Check the Clausius inequality and conclude what type of process it is, considering that T3T1 = T2T4.
Two lbm of air initially at P1 = 15 psia and T1 = 150 F undergoes a cycle consisting of the following three reversible processes: a) an adiabatic compression (PV^k = Constant) from state 1 to state 2 with P2 = 45 psia b) a constant volume process from state 2 to state 3, and c) a constant pressure process back to the initial state (state 1). Assuming constant specific heats and if kair = 1.4 and Rair = 0.3704 psia-ft^3/lbm-R (0.06855 Btu/lbm-R), determine: 1) The initial air volume, V1 2) The temperature of the air at the end of adiabatic process, T2 3) The total volume of the air at the end of adiabatic process, V2 4) The temperature of the air at the end of the constant volume process 5) the entropy change during the first process, S2 - S1 6) The entropy change during the second process, S3 - S2 7) The total heat transfer during these processes, 1Q2, 2Q3, 3Q1 8) The total net work dorn during the cycle, Wnet 9) Sketch the P-V diagram for the cycle
Apply SFEE for the steam nozzle used in the steam powerplant and determine the outlet velocity of the steam using thefollowing details.Steam at 18 bar and 350°C steadily enters a nozzle whose inletarea is 200 cm2. The mass flow rate of the steam is 4.5 g/s. Heatlosses from the nozzle per unit mass of the steam are estimatedto be 2.8 kJ/kg. Steam leaves the nozzle at 14 bar, 300 °C.Determine the outlet velocity of the steam.
Air enters the turbine of a gas turbine at 1200 kPa, 1200 K, and expands to 100 kPa in two stages. Between the stages, the air is reheated at a constant pressure of 350 kPa to 1200 K. Both turbines have same isentropic efficiency 85% Determine, in kJ per kg of air flowing (a) the work developed by each stage. (b) the heat transfer for the reheat process. (c) the increase in net work as compared to a single stage of expansion with no reheat
Steam at a massflow rate of 10 kg/s at 5 MPa and 600 °C enters an insulated turbine operating at steady state and exits as saturated vapor (x = 1) at 56 kPa. Kinetic and potential energy effects are negligible. [7.5] a) Calculate the work output of the turbine. [5] b) Does the expansion process inside this particular turbine occur in a reversible or irreversible way ? Please briefly explain your reasoning. [5] d) Sketch the process path inside the turbine in a T-S diagram. Include the two-phase region in your diagram as well. [7.5] c) Calculate the isentropic efficiency of the turbine show linear interpolation
True or false For an internally reversible, steady-state flow process, the heat transfer per unit mass can be represented as the area below the process line on a T-s diagram.
a cycle 1-2-3-4-1 is proposed in which 1-2 is a reversible adiabatic process, 2-3 is a reversible constant temperature endothermic process, 3-4 is a reversible adiabatic process, 4-1 is an irreversible adiabatic process, and 1, 2, 3 and 4 are three equilibrium points respectively. can this cycle be realized and why?