35. The intcrnal and external diameters of an inward flowreaction turbine are 0 6 metre and 1 metre respectively. The widthof the wheel at inlet and outlet is 12 cms.is 9 metres and the hydraulic efficiency is 90%. The vane angle atoutlet is 20°. The final discharge at outlet is radial at a velocity of2 70 metres per second.Find (a) The guide blade angle.The head on the turbinc(6) The runner vane angle at inlet.(c) The speed of the turbine.(d) The discharge of the turbine.(e) The WHP.(14° 8' ; 164° 43'; 236 rpm; 66 hp)

Given Data Internal diameter is: di=0.6 m External diameter is: do=1 m The width of the wheel at…

35. The internal and external diameters of an inward flow reaction turbine are 0 6 metre and 1 metre respectively. The width of the wheel at inlet and outlet is 12 cms. is 9 metres and the hydraulic efficiency is 90%. The vane angle at outlet is 20°. 2.70 metres per second. Find (a) The guide blade angle. The head on the turbinc The final discharge at outlet is radial at a velocity of (6) The runner vane angle at inlet. (c) The speed of the turbine. (d) The discharge of the turbine. (e) The WHP. (14° 8' ; 164° 43'; 236 rpm; 66 hp)

35. The internal and external diameters of an inward flow reaction turbine are 0 6 metre and 1 metre respectively. The width of the wheel at inlet and outlet is 12 cms. is 9 metres and the hydraulic efficiency is 90%. The vane angle at outlet is 20°. 2.70 metres per second. Find (a) The guide blade angle. The head on the turbinc The final discharge at outlet is radial at a velocity of (6) The runner vane angle at inlet. (c) The speed of the turbine. (d) The discharge of the turbine. (e) The WHP. (14° 8' ; 164° 43'; 236 rpm; 66 hp)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A Pelton wheel is to be designed for a head of 400 m when running at 500 rpm. The Pelton wheel develops 10000kW shaft power. The blade angle at outlet is 15º. The relative velocity of water is reduced by 5% by moving over the buckets. Velocity of the buckets = 0.45 times the velocity of the jet, overall efficiency = 0.8 and coefficient of the velocity = 0.98. If the Pelton wheel is provided with three nozzle, find (i) The diameter of jet (ii) Total flow rate and the force exerted by a jet on the buckets
[5] A Francis turbine operates at its maximum efficiency point at h0 = 0.94, corresponding to a power specific speed of 0.9 rad. The effective head across the turbine is 160 m and the speed required for electrical generation is 750 rev/min. The runner tip speed is 0.7 times the spouting velocity, the absolute flow angle at runner entry is 70 deg from the radial direction and the absolute flow at runner exit is without swirl. Assuming there are no losses in the guide vanes and the mechanical efficiency is 100%, determine (i) the turbine power and the volume flow rate; (ii) the runner diameter; (iii) the magnitude of the tangential component of the absolute velocity at runner inlet; (iv) the axial length of the runner vanes at inlet.
A Kaplan turbine runner is to designed to develop 10000 hp, the net head is 5.5 m. Assume that the speed ratio is 2.09 and the flow ratio is 0.68, and the overall efficiency is 60%. The diameter of the boss is 1/3 rd of the diameter of the runner . The discharge is ؟
A Pelton wheel works at the foot of a dam because of which the head available at the nozzle is 400 m. The nozzle diameter is 160 mm and the coefficient of velocity is 0.98, The diameter of the wheel bucket circle is 1.75 m and the buckets deflect the jet by 150°. The wheel-to-jet speed ratio is 0.45. Neglecting riction, calculate (1) the power developed by the turbine, (i) its speed and (i) hydraulic efficiency.
A Kaplan turbine runner is to designed to develop 10000 hp, the net head is 5.5 m. Assume that the speed ratio is 2.09 and the flow ratio is 0.68, and the overall efficiency is 60%. The diameter of the boss is 1/3 rd of the diameter of the runner . The diameter of the runner is *
It is desired to develop a 5 MW turbine under an effective head of 320 m. The turbine efficiency is85%. Velocity coefficient of the nozzle is 99%.(a)Select which is the appropriate turbine based on effective head.(b)What should be the wheel diameter in meters assuming it is 12 times the diameter of the jet?
An existing impulse turbine-generator installation operates at 450 rpm under a net Head of 520 m. The output current is 60 cycles per second. If a single 18-cm diameter waterjet is used, Cv = 0.98, Øe = 0.45 and ηT = 0.85. Find the flow through turbine in m3/sec.
A multi stage pump is required to deliver of 2 l/s water against a maximum discharge head of 240 m. The diameter of radial bladed impeller should not be more than 15 cm. Assume a speed of 2800 rpm. Determine the impeller diameter, and power. Overall efficiency is 0.7.
The mean radius of an axial flow reaction turbine is 2.6 ft. and the axial velocityis 25 ft./s. The wicket gates are turned at an angle such that relative velocity at theinlet flow makes an angle of -45° with the blade velocity. The wheel and hub radiiare 3.6 ft. and 1.6 ft., respectively. The turbine rotates at 240 rpm. If water leaves theblade in a purely axial direction, calculate H and all relevant angles.Ans: H=81.87 ft.; α1=31.8°; β2=20.93°
Before solve the problem please understand the question. Give me right solution according to the question. A flow rate of 0.14 m3 / s is required from a centrifugal pump with an outer radius of 23cm and rotating at 900 rpm. The width of the propeller is b = 8cm (at the outlet). Assuming 73% efficiency, what motor horsepower is required if the outlet angle is 165º? Suppose the pallets occupy 5% of the exit area.
In a francis turbine the vane angle at the entry to the runner is 90degrees, which is rotationg at 75rpm, outer radius is 0.6m and inner radius is 0.3m, velocity at entry and exit to the vanes is 1.8m/s. The water is discharged radially. If the discharge is 1.42m3/s and neglecting friction in the runner calculate: the vane angle at discharge the ouput power developed
Suppose that the axial-flow pump of Fig. with D =18 in, runs at 1800 r/min. (a) Could it efficiently pump25,000 gal/min of water? (b) If so, what head would result?(c) If a head of 120 ft is desired, what values of D and nwould be better?