*4-4. The A-36 steel rod is subjected to the loading shown. If the cross-sectional area of the rod is 50 mm², determine the displacement of C. Neglect the size of the couplings at B, C, and D. -1 m 1.5 m- -1.25 m- PA 9 kN B C 4 kN D 2 kN

*4-4. The A-36 steel rod is subjected to the loading shown. If the cross-sectional area of the rod is 50 mm², determine the displacement of C. Neglect the size of the couplings at B, C, and D. -1 m 1.5 m- -1.25 m- PA 9 kN B C 4 kN D 2 kN

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.8.1P: The shear stresses t in a rectangular beam arc given by Eq. (5-43): in which Fis the shear force, /...

See similar textbooks

Related questions

Q: 5-62. The two shafts are made of A-36 steel. Each has a diameter of 1 in., and they are supported by…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 39.00 N-m 37.00…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 36.00 N-m 28.00…

Q: *4-12. The rigid metal strip of negligible weight is used as part of an electromagnetic switch. If…

A: Draw the FBD of the beam. ΣMB = 0FA50 mm-FC50 mm = 0FA= FC.......(1)ΣFV = 0FA-FB+FC = 02FA =FB…

Q: 3-105. The building slab is subjected to four parallel column loadings. Determine F, and F, if the…

Q: 4-135. The building slab is subjected to four parallel column loadings. Determine F, and F, if the…

A: Given data , Four forces are at location(units are meter) F1=(22,0) 12 kN=(6,8) 6kN=(26,20) F2=…

Q: B 50 mm 0.75 m 100 mm- 500 N-m C 1.5 m

Q: 6-75 A 500-lb homogeneous circular plate is supported by three cables as shown in Fig. in the three…

A: Write the expression of the position vector of point A. Write the expression of the position vector…

Q: Given the axially-loaded rod below, which has a diameter of d = 20 mm and %3D is made of steel with…

Q: 4-133. If the resultant force is required to act at the center of the slab, determine the magnitude…

Q: The rigid bar is supported by the two short white spruce wooden posts and a spring. If each of the…

Q: F4-3. The 30-mm-diameter A-36 steel rod is subjected to the loacing shown. Determine the…

A: Given data The 30-mm-diameter A-36 steel rod is subjected to the loading shown To determine the…

Q: Q1) The A36 steel rod is subjected to the loading shown. If the cross-sectional area of the rod is…

A: Given data as per question Cross-section area = 75 bmm2 considering the forces in between section AB…

Q: 1- The work done by the force F 41-31+2 k to displace a body from point (3,2,-1) to point (2,-1,4)…

Q: The machine is moving with a constant velocity. It has a total mass of 20 Mg, and its center of mass…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 22.00 N-m 31.00…

A: Let us discuss about internal torque under equilibrium for section 3.

Q: 5-86. Operation of exhaust and intake valves in an automobile engine consists of the cam C, push rod…

A: Given Data The copression of the spring is: 20 mm=0.02 m The stiffness is: 300 N/m To Determine…

Q: 4-14. The post is made of Douglas fir and has a diameter of 60 mm. If it is subjected to the load of…

Q: 4-59. The friction at sleeve A can provide a maximum resisting moment of 125 N m about the x axis…

A: Given Data M=125 N.m

Q: 7-18. The shaft is supported at its ends by two bearings A and B and is subjected to the forces…

A: To determine : RA & RB in z-direction RA & RB in the y-direction…

Q: Determine the extension (m) of the whole system shown if k1 - 14.28 N/m, k2 = 28.89 N/m, k3 =- 37.72…

A: Given:k1=14.28 N/mk2=28.89 N/mk3=37.72 N/mk4=41.16 N/mk5=51.08 N/mF=65.48 N

Q: 4-6. The bar has a cross-sectional area of 3 in?, and E = 35(10') ksi. Determine the displacement of…

Q: The truss is made of three A-36 steel members, each having a cross-sectional area of 400 mm2.…

A: There will be only vertical reaction at 'C' because it is a roller support and can allow horizontal…

Q: 4-53. The automobile has a mass of 2 Mg and center of mass at G. Determine the towing force F…

Q: A force of 10 kN is applied to the hook. If the CB cable is made of steel (E= 200 GPa) and has a…

Q: 4-1. The A992 steel rod is subjected to the loading shown. If the cross-sectional area of the rod is…

Q: 6-106. Consider the general case of a prismatic beam subjected to bending moment components M, and…

A: To find: The value of constants a,b and c and show that the normal stress is…

Q: If P = 4.1 kN , determine the horizontal displacement of end F of rod EF.

Q: The 500-kg large chandelier is suspended from the wall and ceiling using rods AB and BC which have…

A: The free-body diagram of the given system will be as follows, The data given is, Diameter of rod…

Q: 7-21. Determine the resultant internal loadings acting on the cross section at point C in the beam.…

A: Given, The mass of load D, m=300 kg The radius of the pulley, r= 0.1 m Now free body diagram of the…

Q: The cable AB prevents bar OA from rotating clockwise about the pivot O. If the cable tension is 81O…

Q: 3-45. The lug nut on the wheel of the automobile is to be removed using the wrench and applying the…

A: given data as per question Force= 30 N

Q: 1-1. Determine the resultant internal normal force acting on the cross section through point A in…

Q: Segments AB and CD of the assembly are solid circular rods, and segment BC is a tube. If the…

A: →Consider the free body diagrams of the following systemsolid circular shaft AB FAB=10-10-10FAB=-10…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 38.00 N-m 28.00…

Q: The spring ABC has a stiffness of 500 N/m and an unstretched length of 6 m. A horizontal force F is…

Q: 4-6. The bar has a cross-sectional area of 3 in', and E = 35(10³) ksi. Determine the displacement of…

Q: Q3 The solid steel shaft has a diameter of 20 mm. If it is subjected to the two torques, determine…

A: Torque is the moment that twists the member along its longitudinal axis Given- Data:- Diameter=20mm…

Q: The tapered shaft is confined by the fixed supports at A and B. If a torque T is applied at its…

A: Given data: The radius of the shaft at point A is 2c. The radius of the shaft at point B is c. The…

Q: *4-76. The device is used to measure a change in temper- ature. Bars AB and CD are made of A-36…

Q: •5-13. If the applied torque on shaft CD is T' = 75 N•m, determine the absolute maximum shear stress…

A: According to given conditionWe haveRadius of Gear F=rf=125mmRadius of Gear E=re=50mmNow max. shear…

Q: *4-4. The A-36 steel rod is subjected to the loading shown. If the cross-sectional area of the rod…

Q: Q4. The steel shaft is L mm long and is screwed into the wall using a wrench. Determine the maximum…

A: Given data: The length of the steel rod is L = 380 mm. The magnitude of the couple forces F = 400…

Q: 3–19. The tongs are used to grip the ends of the drilling pipe P. If a torque (moment) of Mp = 1200…

A: Given data Mp=1200 N·m

Q: E = 200 GPa A = 300 mm2 L= 3 m P. A 2 m 2 m D BO 1.5 m 3.0 m

Q: If the 20-mm-diameter rod is made of A-36 steel and the stiffness of the spring is k = 50 MN>m,…

Q: Q.3 The solid steel shaf has a diameter of 20 mm. If it is subjected to the two torques, determinet…

Q: P9-1 D The steel rod (E= 200GPA) is subjected to the loading shown. If the cross-sectional area of…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 39.00 N-m 37.00…

A: take momentum about x axis is zero answer in second step

Question

100%

02:27
MENG360 - C...
Problems (8th edition): 4.4 - 4.6 – 4.14 - 4.19
1
*4-4. The A-36 steel rod is subjected to the loading
shown. If the cross-sectional area of the rod is 50 mm²,
determine the displacement of C. Neglect the size of the
couplings at B, C, and D.
1m
1.5 m
–1.25 m ·
ÞA 9 kN B
C 4 kN
D 2 kN
4-6. The bar has a cross-sectional area of 3 in?, and
E = 35(10) ksi. Determine the displacement of its end A
when it is subjected to the distributed loading.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The truss is made of three A-36 steel members, each having a cross-sectional area of 400 mm2. Determine the horizontal displacement of the roller at C when P = 8 kN.
The A-36 solid steel shaft is 2 m long and has a diameter of 60 mm. It is required to transmit 60 kW of power from the motor M to the pump P. Determine the smallest angular velocity the shaft if the allowable shearstress is tallow = 80 MPa.
The A-36 steel tubular shaft is 2 m long and has an outer diameter of 50 mm. When it is rotating at 40 rad>s, it transmits 25 kW of power from the motor M to the pump P. Determine the smallest thickness of the tube if the allowable shear stress is tallow = 80 MPa.
The rigid bar is supported by the two short white spruce wooden posts and a spring. If each of the posts has an unloaded length of 1 m and a cross-sectional area of 600 mm2, and the spring has a stiffness of k = 2 MN >m and an unstretched length of 1.02 m, determine the vertical displacement of A and B after the load is applied to the bar.
The five-bolt connection must support an applied load of P = 3500 lb. If the average shear stress in the bolts must be limited to 29 ksi, determine the minimum bolt diameter that may be used for this connection.
The cylindrical pressure vessel with hemispherical end-caps is made of steel. The vessel has a uniform thickness of 0.02R mm and an outer diameter of 0.444R mm. When the vessel is pressurized to 0.004R MPa, determine the change in the overall length of the vessel. Use E = 200 GPa and µ = 0.3 for steel. Neglect localized bending. Note R=993
The shaft consists of three concentric tubes, each made from the same material and having inner and outer radii as given below. Length of shaft is 2m. One end is fixed to the wall and to the other end a disc is attached. If a torque of T =800 N.m is applied at the disc end, determine the maximum shear stress in the shaft. 1. Inner tube: r; = 20mm, r, = 25 mm 2. Center tube: r; = 26 mm, r. = 30 mm 3. Outer tube: r = 32mm, r, = 38mm
: The cylindrical pressure vessel with hemispherical end-caps is made of steel. The vessel has a uniform thickness of 0.44mm and an outer diameter of 9.768mm. When the vessel is pressurized to 0.088 MPa, determine the change in the overall length of the vessel. Use E = 200 GPa and µ = 0.3 for steel. Neglect localized bending.R=22
A992 steel bar is subjected to the loading shown. If the cross-sectional area of the bar is 80 mm², determine the displacement of C and D.
The L-shaped frame is made from two fixed-connected segments. Determine the horizontal displacement of the end C. Use the method of virtual work. EI is constant.
The drive shaft of the motor is made of a material having an allowable shear stress of τallow= 72 MPa. the shaft is operating at an angular velocity of 1700 rev/min. Take ci= 0.75 co. A) If the motor is to deliver a power of 25 kW, determine the required minimum outer diameter of the tubular shaft to the nearest mm. Express your answer in millimeters. B)Determine the required corresponding inner diameter of the tubular shaft to the nearest mm. Express your answer in millimeters
The steel shaft is made from two segments: AC has a diameter of 0.5 in., and CB has a diameter of 1 in. If the shaft is fixed at its ends A and B and subjected to a torque of 500 lb.ft at point C, determine the maximum shear stress in the shaft. G = 10.8x10^3 ksi