4. The %Mn in steel can also be determined spectrophotometrically by oxidizing the manganese to the intensely colored permanganate, MnO4. Standard solutions of permanganate gave the following absorbances (in a 1 cm cell): ABSORBANCE CONC. OF MnO4 (g/mL) 0.210 1.05 x 10-5 0.315 1.61 x 10-5 0.429 2.21 x 10-5 0.599 2.98 x 10-5 0.801 4.04 x 10-5 The following samples of steel were thoroughly reacted to convert the manganese ir permanganate and then diluted to 500.00 mL. WT. OF STEEL (g) ABSORBANCE 0.5886 0.611 0.3498 0.359 0.4555 0.482 Again using Excel, plot the calibration data and calculate the %Mn in the steel.

4. The %Mn in steel can also be determined spectrophotometrically by oxidizing the manganese to the intensely colored permanganate, MnO4. Standard solutions of permanganate gave the following absorbances (in a 1 cm cell): ABSORBANCE CONC. OF MnO4 (g/mL) 0.210 1.05 x 10-5 0.315 1.61 x 10-5 0.429 2.21 x 10-5 0.599 2.98 x 10-5 0.801 4.04 x 10-5 The following samples of steel were thoroughly reacted to convert the manganese ir permanganate and then diluted to 500.00 mL. WT. OF STEEL (g) ABSORBANCE 0.5886 0.611 0.3498 0.359 0.4555 0.482 Again using Excel, plot the calibration data and calculate the %Mn in the steel.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter26: Molecular Absorption Spectrometry

Section: Chapter Questions

Problem 26.15QAP

See similar textbooks

Similar questions

Equations for the chemiluminescence determination of SO2 are given on page 383. Derive an expression for the relationship between the concentration of SO2 in a sample, the luminescence intensity, and the equilibrium constant for the first reaction.
The absorbances of solutions containing K2CrO4 in 0.05 M KOH were measured in a 1.0-cm cell of 375 nm. The following results were obtained: Calculate the concentration of K2CrO4 (g/L) if the A is 0.550.
Resistivity measurements at 300 K show that an annealed metal single crystal has amonovacancy concentration CV = 10-9. When the same crystal is quenched from a hightemperature, the measurements indicate CV = 2x10-3. Calculate the temperature of thequench [Take Hf = 51.4 kJ/mol and R = 8.314 J/mol.K]. State any assumption involved. (5)(b) Explain why the esistivity of a metal is expected to be found more at room temperature after quenching. Hint: Use Matthiessen’s rule (find out by self-studying and cite thesource.)
In the determination of iron in fortified cereals by atomic absorption, 0.9133 g of sample was weighed. After a previous treatment, it was dissolved and diluted to 100 mL, an aliquot of 25.0 mL was taken, this was diluted to 100 mL and this solution presented an absorbance reading of 0.251. A series of iron standards of the following concentrations were prepared: 0.0; 1.0; 2.0; 2.5 and 3.0 ppm. Whose absorbances were 0.0; 0.241; 0.405; 0.520 and 0.640. Determine the iron concentration in mg/100 g of sample.
In an analysis of chromium in steel containing 1.76% Cr. 0.5000 g of that steel is weighed and dissolved in acid, whereupon the Cr is oxidized to Cr2O72- (dichromate), and blunt to a volume of 250 mL. A 10 mL aliquot of this solution is diluted with water and acid to a final volume of 100 mL. The resulting solution shows a transmittance of 41.7% in a 1 cm pathlength cell. When a 0.7500 g sample of unknown steel is dissolved in acid, oxidized, and diluted to 250 mL, the resulting solution exhibits a transmittance of 61.3% under identical experimental conditions. What is the percentage of Cr in the steel?
The absorbance of a 0.00105% m/v solution of tolbutamide in methanol when measured in a 1 cm path length cell was found to be 0.796 at 228 nm. Calculate the specific absorbance.
A solution containing 5.54 ppm KMnO4 exhibits72.5 %T in a 1.50-cm cell at 520 nm. A. Calculate the absorbance of the solution. B. Calculate the molarity of potassium permanganate. C.
A 10.0-mL aliquot of a standard manganese solution containing 62.5 mg/L of Mn is oxidized to MnO4- and diluted to 50.0 mL in a volumetric flask. The absorbance is measured in a 1.00-cm cell at 525 nm is 0.343. Next, a 850-mg steel sample containing manganese in dissolved in acid and diluted to 250 mL. A 50.0-mL aliquot is treated with KIO4 to oxidize Mn to MnO4- and diluted to 100.0 mL. If the absorbance at 525 nm is 0.468 in a 1.00-cm cell, calculate the weight percent of Mn in the steel.
A 0.2653 g of pure potassium dichromate was dissolved in 15 mL of 1.5 M sulfuric acid and transferred to a 250.0 mL volumetric flask and diluted to the mark with distilled water. A 25.0 mL aliquot of this solution was transferred to another 250.0 mL volumetric flask and diluted to the mark with distilled water and this solution has an absorbance 0f 0.387 in a 2.00 cm cell. Calculate the molar absorptivity of potassium dichromate.
using the graph provided, find the concentration of a solution that had an absorption of .269 when measured at 460nm in a 1.0cm cuvette.
You want to determine the amount of iron(III) in acomplex salt. You make a 100.0 mL solution of the complex salt by dissolving 0.0670 g of complex salt with water to the mark on a 100.0 mL volumetric flask. You get an absorbance reading for the iron from the spectrometer of 0.334. The molar absorptivity is determined to be 17605 L/mole∙cm and the pathlength is 1.00 cm. Determine the molarity of iron(III) in solution. Determine the mass percentage of iron(III) in the complex salt.
Ammonium iron(II) sulfate crystals have the following formula: (NH4)2SO4.FeSO4.nH2O . In an experiment to determine n 8.492g of the salt were dissolved and made up to 250cm^-3 of solution with distilled water and sulphuric acid. A 25.0cm^-3 portion of the solution was titrated against 0.0150 mol dm^-3 KMnO4. A volume of 22.5cm^-3 was required. Find the value of n