Answered: 450 Ib 1500 Ib Gr 9 fí 280 lb 600 lb 7…

Engineering

Civil Engineering

450 Ib 1500 Ib Gr 9 fí 280 lb 600 lb 7 fi G4 12 ft. 5 ft 3 ft 8 ft. Sit 4 ft Prob. 9-87

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: 1. Consider the cantilevered beam shown in the diagram below. What are the resultant forces in the…

Q: 3.) AS SHOWN IN THE FIGURE, A RIGID BEAM WITH NEGLIBLE WEIGHT IS PINNED AT ONE END AND ATTACHED TO…

Q: A spar buoy is a rod weighted to float vertically, as shown in the image. Let the buoy be maple wood…

Q: A tripod supports the load W as shown in the figure. Determine the maximum load "W" (in pounds),…

Q: A diagonal tension brace, 15ft long with a round cross-section diameter of 3/4” is subjected to…

A: Change in length is given by ∆L ∆L = PLAE where ; ∆L = Change in length P = Tensile load = 10 k L =…

Q: ed beam shown is 5.6m long. A man of weight 'W' is standing at the middle of the beam. Neglect the…

Q: The beam is constructed from two boards fastened together at the top and bottom with three rows of…

Q: -1 ft 20 lb В 3 ft. 2 ft. C 4 ft. 30 lb 60 Ib

A: A free body diagram indicates all the external forces acting on a part of a system and shows it…

Q: Given a cantilever beam with given loadings and cross-section as shown in the figures, what is the…

Q: Determine the shear flow in wall AB. (Provide your answer in whole numbers and include units.…

A: Assume that shear flow in cell 1 is S1 and cell 2 is S2 The angle of rotation are: θ1=12AGϕs×dst…

Q: Determine the shear flow in wall AB. (Provide your answer in whole numbers and include units.…

Q: 30 „5 in. 18 in. B

A: to find - moment about A in given illustration

Q: The beam ABC shown in given figure is horizontal. The distance to the point of contraflexure from…

A: Given data, The distance to the point of contra flexure from the fixed end A

Q: A tripod supports the load W as shown in the figure. Determine the maximum load "W" (in pounds),…

A: Solution-The given values are,The capacity of each leg =87lbsTo Determine The maximum load W

Q: The top block weighs 50 16 while the bottom box weighs 25 Ib. The coefficient of static friction for…

A: as the block is present in the rest position so we have to consider static friction

Q: If d be the diameter of MS or tor steel bars in mm, the standard weight (in kg) per metre of the bar…

A: Given: Diameter of steel bar = d Length, l =1 m Density of steel bar = 7.85×10-3

Q: A 60-kg crate is lying on a horizontal plane. A pulling force P is applied to the crate by a rope…

A: Given :

Q: Determine the weight (mass) of steel bars used for stirrups needed for the delivery of the specified…

A: Here we use weight per unit length × total length of stirrup bars to determine the total weight of…

Q: What is the Final Moment in B for the 300 lb 300 lb 135 lb/ft given beam? a. 640 lb-ft b. 1077 lb-ft…

A: It is the beam that is most commonly subjected to bending moments. As the sum of the moments about a…

Q: A steel bar 1 in. square is 14ft long and has a modulus of elasticity of 29,000,000 psi. What total…

A: We know:Deformation =PLAEP=loadL=lengthA=areaE=modulus of elasticity of so,

Q: Problem 20 k G y 10k E 15 ft F 10k russ is subjected to the following forces as pwn. Determine: 10…

A: To find the support reactions and resultant force-

Q: x106 mm4. C dimension in mm is the height of the vertical The built-up beam shown in the fig…

Q: 05. A timber column, 8 in. by 8 in. in cross section, is reinforced on all four sides by steel…

Q: The weights of the various components of the truck are shown. Replace this system of forces by an…

A: Draw Free Body Diagram:

Q: Determine the Plastic Section Modulus (Zx) and Elastic Section Modulus ($x). Express your answer in…

Q: m 1 Replace the loading system by an equivalent resultant Force and couple moment acting at point A.…

A: Given F1=130lb F2=60lb F3=180lb

Q: A flanged wooden shape is used to support the loads shown on the beam. The dimensions of the shape…

A: Given values: Consider the loaded beam and the cross section of the beam. b1 =10 in, b2 =2 in, b3 =5…

Q: 5. A steel tape is 150 m. long at a standard pull of 65 N. Compute the pull correction in mm if…

Q: Given the beam loaded below, compute the following: a. Reaction @ support A b. Reaction @ support B…

A: Given:- To find:- Reaction at support A Reaction at support B

Q: 75 mm - 300 mm Exercise #3: The short legs of four 6" x 4" x ½" angles are connected to a web plate…

A: The essentials of mechanics sound more appropriate to the structure of airplane and boats and…

Q: 14 100 lb Given the space force below, what is its x-component? 8. O A. 87.4 lb to the right O B.…

Q: Q) Four forces act on an eye bolt as shown in figure below. Determine the resultant and direction of…

A: Given:- Four forces are acting on an eye bolt The magnitude of force F1 = 30 N The magnitude of…

Q: Show how to resolve each force into its x, y, zcomponents. Set up the calculation used to find…

A: (a) Consider the figure,

Q: Consider a beam shown in the figure below. (Figure 1) Figure 1 of 1 400 lb/ft 900 lb Express the…

A: Given :

Q: Example 2.8 diameter being 10 mm as shown in Fig. 2.23. Under a load of 25 kN, if the extension of…

A: As per Hooke’s law, up to the proportional limit for small deformation, stress is directly…

Q: Q1) Three bars each made of different materials are connected together and placed between two walls…

Q: A spar buoy is a rod weighted to float vertically, as shown. Let the buoy be wood (SG = 0.6) with…

Q: A metal part is hanging by a thin cord from a floating wood block. The wood block has a specific…

Q: The triangular block shown in the figure is subjected to loads P = 1600 N and F = 600 kN. If AB = 8…

Q: The loads acting on a 3 mm diameter bar at different points are as shown in the figure: В A D 5kN…

Q: A box of weight 100 kN shown in the figure to be lifted without swinging. If all the forces are…

Q: A force P is being applied laterally to the crate which has a center of gravity at G. The…

A: Find P value to impend tipping of the crate

Q: I kir Ok 05 kir 20 10 10 10

A: An axial loaded beam is given and it has been asked to draw axial force diagram, please refer step 2…

Q: 1. A force of 250 kN at 25° is combined with a force of 180 kN at 100°. What is the resultant force…

Q: A steel tape weighing 0.85 kg has a cross-sectional area of 0.05 cm2. The tape measures exactly…

Q: 10 ft C D. 10 ft 10 ft 10 ft- 4k 4 k Refer to the figure, which force member s equal to zero?

Q: Z 900 N 65⁰- y O 20⁰ 35⁰ 750 N 25⁰ X

Q: A simply supported beam with a span of 6 m whose cross section shown in fig. (6). Calculate the…

A: Solution; Given that; fC'=21 MPafy=350 MPan=9Live load=40 KN/mSelf weight=30 KN/mSpan=6 m

Q: PROBLEM 1 The platform scale consists of a combination of third and first class levers so that the…

Concept explainers

Bars

In civil engineering, bars refer to steel reinforcement bars or rebars. These are structural members primarily used for reinforcement purposes in masonry works. A bar is characterized by its cross-sectional area, which is negligible compared to its length. Bars are usually manufactured by steel which is uniform throughout the length, or by meshing multiple steel wires. Other materials of the bar include carbon steel, glass fiber, carbon fiber, and basalt fiber. The reinforcing bars are coated with epoxy resins and other materials to enhance some of their properties including corrosion resistance.

Question

Major floor loadings in a shop are caused by the weights of the objects shown. Each force acts through its respective center of gravity G. Locate the center of gravity (x̄, y̅) of all these components.

450 Ib
1500 Ib
Gr
9 fí
280 lb
600 lb
7 fi
G4
12 ft.
5 ft
3 ft
8 ft.
Sit
4 ft
Prob. 9-87

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

22 Determine the plastic moment strength (kN-m) of a C10x30, A572 Gr. 50 steel, about the minor axis. d = 254 mm bf = 80.52 mm tw = 12.95 mm tf = 12.73 mm A. 16.85 B. 27.46 C. 19.74 D. 23.44
22 Determine the plastic moment strength (kN-m) of a C15x40, A992 steel, about the minor axis. d = 381 mm bf = 89.41 mm tw = 13.21 mm tf = 16.51 mm A. 36.24 B. 30.98 C. 43.11 D. 50.41
Use fc=14.3N/mm^2 ft=1.43N/mm^2 HRB400 fy=360N/mm^2
At-beam has a width of flange equal to 700mm and a thickness of 100mm. It has an effective depth of 450mm and the width of the web section is 350mm. It is reinforced at the bottom with a steel area of 2925sq.mm. fc'=17.24MPa, fy=413.7MPa. The depth of the compression block is _mm. A. 136.00mmB. 146.00mmC. 126.00mmD. 156.00mm
answer key : m = 450 kg, W = 45.89N = 10.32lb, m=450kg, W=275.3N
A W 12 a x 72 is used as a column to carry an axial load P. The column has a fixed . oport at the bottom and hinged at the top. The column has an unsupported height of 6m. Using A 36 steel with Fy = 248 MPa. Es = 200000 MPa. Properties of W 12 x 72 A = 13677A0 mm2 d = 311.15 mm bf= 305.82 mm tf = 17.04 nun tw = 10.92 mm Ix = 248.5 x 106 mm4 Iy = 81.17 x 106 mm4 rx = 134.87 mm ry = 77.22 rnm a) Compute the recommended value of the slenderness ratio. b) Compute the allowable compressive stress. c) Compute the allowable axial load P.
Perform the indicated operation: (5+2i)+(7+4i)
Steel Design Given: S = 2m L = 10m Superimposed dead load = 5 kPa Live load = 3.6 kPa Properties of Beam BFA section = W 460 x 97 kg/mArea (A) = 12320 mm^2Depth (d) = 465 mmFlange Width (bf) = 193 mmFlange Thickness (tf) = 19mmWeb Thickness (tw) = 11 mm Moment of InertiaIx = 445 x 10^6 mm^4Iy = 23 x 10^6 mm^4Yield Strength, Fy = 248 MPar (radius of gyration of a section compromising the compression flange plus 1/3 of the compression web area of compression flange = 50 mm. Consider bending about the x-axis. 1. The compression flanges are laterally supported only at midspan. With this condition, what is the permissible flexural stress if Cb = 1.0?
A W12 x 79 is used as a column section with an unbraced length of 4.1m. Assume Kx = Ky =1.0.Use Fy = 245 MPa, fc' = 28 MPa. The column is interfaced to a concrete pedestal. E = 200000 MPa. Properties of W12 x 70 A = 14968 mm2 Sx = 1753 x 103 mm3 d = 314.45 mm Sy = 587 x 103 mm3 bf = 306.83 mm rx = 135.64 mm tf = 18.69 mm ry = 77.47 mm tx = 11.94 mm a) Compute the max. Capacity of the column section. b) Design the size of the column base plate. c) Design the thickness of the base plate.
d1 (mm)=16 d2 (mm)=22 P (kN)=55 L (mm)=400
A built-up I-section is composed of two 10" x 3/8" flange plates welded to a 12" x 1/4" web plate. Both flanges and web are made of A992 steel. The column is 10-ft high with one end pinned and the other is free to translate but restricted from rotating. Determine the moment of inertia about the x-axis, in x 106 mm4? Select one: a. 323.23 b. 307.80 c. 469.37 d. 405.12
How much is the required Area of reinforced As only for a T-beam (h=275mm, bw=475mm) carrying a factored moment of 440 kNm? Let db=20mmds=10mmCc=40mmfc=21MPafy=345MPaln=5.5msw on both sides = 2000mm