5. Consider a carton of milk that is refrigerated at a temperature of Tm = 5 °C. The kitchen temperature on a hot summer day is T- -30 °C. If the four sides of the carton are of height and width L 200 mm and w= 100 mm, respectively, determine the heat transferred to the milk carton as it sits on the kitchen counter for durations of t=10 s, 60 s, and 300 s before it is returned to the refrigerator. The convection coefficient associated with natural convection on the sides of the carton is h= 10 W/m²K. The surface emissivity is 0.90. Assume the milk carton temperature remains at 5 °C during the process. Your parents have taught you the importance of refrigerating certain foods from the food safety perspective. Comment on the importance of quickly returning the milk carton to the refrigerator from an energy conservation point of view.

5. Consider a carton of milk that is refrigerated at a temperature of Tm = 5 °C. The kitchen temperature on a hot summer day is T- -30 °C. If the four sides of the carton are of height and width L 200 mm and w= 100 mm, respectively, determine the heat transferred to the milk carton as it sits on the kitchen counter for durations of t=10 s, 60 s, and 300 s before it is returned to the refrigerator. The convection coefficient associated with natural convection on the sides of the carton is h= 10 W/m²K. The surface emissivity is 0.90. Assume the milk carton temperature remains at 5 °C during the process. Your parents have taught you the importance of refrigerating certain foods from the food safety perspective. Comment on the importance of quickly returning the milk carton to the refrigerator from an energy conservation point of view.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The open-ended pipe has a wall thickness of 2mm and an internal diameter of38mm. Calculate the pressure that the ice exerts on the interior wall of the pipe tocause it to burst along the cross-section and along the longitudinal section. Allowablestress at freezing temperature of the material is 350MPa
The wall of a furnace has an inner temperature of 500 F. The wall has a thickness of 2 inches and has a thermal conductivity of 0.02 Btu/(h·ft·F). On the outside, air at 30 F flows over the 10 ft x 10 ft wall at a speed of 10 ft/s. Determine the rate of heat loss from the furnace to the environment. Use thermal resistance to solve
A Gasoline engine operating on an air standard condition has a clearance volume of 15cm3 and a displacement volume of 100cm3 . Determine the theoretical thermal efficiency of the engine.
A 3-meter high room is heated through a vertical steam pipe. If the bulk temperature of steam in the room was 25 degrees Celsius when the steam in the pipe is 98 degrees Celsius. Determine the minimum dimension of the pipe that could generate a power of 725 Watts if the pipe is (a) square and (b) circular.
A thermometer is being designed for a process in which the temperature varies from 0 to 180 °C; from experience it is known that the process temperature, when it gets out of control, reaches up to 240 ° C. Considering that only the bulb is in contact with the part inside the equipment, what should be the volume of the safety vial? It is known that the bulb has a length of 1.2 cm and a diameter of 0.5 cm; the capillary has a length of 20 cm and the scale of the thermometer is -10 to 190 ° C. Consider that the coefficient of volumetric expansion for mercury is 1.82×10−4 ° C− 1
The jet plane is flying upward such that its wings make an angle of attack of 15∘∘ with the horizontal. The plane is traveling at V� = 750 m/sm/s , in air having a temperature of 8∘C∘C and absolute pressure of 95 kPakPa . The leading edge of the wing has an angle of 8∘∘. (Figure 1) Express your answer to three significant figures and include the appropriate units. Determine the temperature of the air just in front or to the right of the expansion waves. Express your answer using three significant figures.
The clear plastic bottles used for carbonated beverages (sometimes also called “soda,” “pop,” or “soda pop”) are made from poly(ethylene terephthalate) (PET). The “fizz” in pop results from dissolved carbon dioxide (CO2); because PET is permeable to CO2, pop stored in PET bottles will eventually go “flat” (i.e., lose its fizz). A 20-oz. bottle of pop has a CO2 pressure of about 570 kPa inside the bottle, and the CO2 pressure outside the bottle is 7 kPa. Assuming conditions of steady-state, calculate the diffusion flux in cm3 at STP/cm2.s of CO2 through the wall of the bottle. The Permeability Constant of the PET bottle is 0.23 x 10^-13 cm3@STP.cm/cm2.s.Pa. Note: assume that each bottle has a surface area of 500 cm2 and a wall thickness of 0.07 cm. Answer in Scientific Notation example 1.1e-12. Round your answer to 2 significant figures.
Derive the general energy equation for an open system and closed system?Show the free body diagram as basis for your derivation.
An electric generator at a power plant produces energy bypassing super heated steam from the high temperature container reservoir through a pipe connected to a series of fans and then into a low temperature reservoir. As the theme passes across the blades of the fan some of the heat energy of this steam is transferred into the mechanical energy which turn the fence which intern are connected to a generator which intern converts the mechanical energy into electrical energy. If the high temperature steam has a temperature of 362.3 K and the low temperature reservoir has a temperature of 134.9 K what is the carnot Efficiency of this process?
Determine the amount of energy (kJ) that needs to be transferred to the water toraise its temperature to 160°F if a water heater is initially filled with 55 gallons ofwater at 50°F.
Volume 0.05 m3 while the piston is attached with the pinin a cylinder with 200 kPa pressure and 300 Kthe temperature is. As a result of heat transfer from the environment, the pressure is 0.4 MPa, the pin breaks, and when the system becomes thermodynamically balanced, its volume is 0.1 m3. Area of piston 0.05 m2, piston and masses on 150 kg and atmospheric pressure102 is KPA. Calculate the pressure and temperature after the pin breaks and reaches the equilibrium position.
On a frictionless horizontal surface a 6.1 kg block is pushed up against a spring and compresses it 0.11 m. The block is then pushed relapsed and upon leaving the spring it is going 14.3 m/s. - determine spring constant K= - the block then slides off the surface edge and falls 1 m on to the ground below. Determine how much thermal energy is generated if the block is going 10 m/s upon impact