8-41 Air enters a 10-m-long section of a rectangular duct of cross section 15 cm x 20 cm made of commercial steel at 1 atm and 35°C at an average velocity of 5 m/s. Disregarding the entrance effects, determine the fan power needed to overcome the pressure losses in this section of the duct. Answer: 2.55 W 15 cm Air 5 m/s 10 m 20 cm

8-41 Air enters a 10-m-long section of a rectangular duct of cross section 15 cm x 20 cm made of commercial steel at 1 atm and 35°C at an average velocity of 5 m/s. Disregarding the entrance effects, determine the fan power needed to overcome the pressure losses in this section of the duct. Answer: 2.55 W 15 cm Air 5 m/s 10 m 20 cm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

water enters a horizontal nozzly with diameter 60 mm at 6 m/s and exits to the atmosphere through a 40 mm diameter outlet. find the pressure at the entrance of the nozzle ? Please urgenttttttttt
A fan has a static head of 100m at 1kg/cm3 and 70F. If air velocity is 15m/s, find the total equivalent head in mm of water gage. ANSWER: 129.53 mm
Design a bar screen for the following conditions:Peak design flow = 54451 m3/d Velocity through the rack at peak flow = 0.9 m/s Angle with the horizontal = 60o
A fire pump delivers water through 15cm main pipe to a hydrant to which is connected an 8cm hose, terminating in a nozzle 2cm in diameter. The nozzle, trained vertically up, is 1.60m above the hydrant and 12m above above the pump. The ead lossesare: pump to hydrant 12J/N; Nozzle: 6% velocuty head in the nozzle. If the gage pressure at the pump is 550kpa to what height can the jet be thrown? Neglect air friction.
Heavy fuel oil at 60°F flows through the 3′′diameter end of pipe orifice, causing the deflection of the mercury in the U-tube gage. Determine the power in the jet. (ANSWER MUST BE = 2.90 Hp )
1. A centrifugal fan supplies 4.7m3 / s of air at a total static pressure of 325Pa. If the fan efficiency is% 60 and rotates at a speed of 950rpm and supplies air with a velocity of 12m / s, determine the fan total pressure, air power, and fan power? Ans. 411 Pa 2. If the efficiency of the fan given in Problem - 1 becomes 70%, determine the power required for running it. Then, find the power required and airflow rate supplied if the fan speed is increased to 1050rpm. Also, assume that the fan static pressure does not change and determine the air velocity out of the fan. Ans. 4.6kW, 6.21kW, 5.195m3 / s, 17.2m /
Circulation of water (1000 kg/m3, 1E − 6 m2/s), takes place through a filter as shown in fig. below. The water at 0.005 m3/s is pumped through 120-m-long and 5-cm-diameter pipe, - made up of brass. Find the total ∆p if the head loss in the pump is 55m.1. Sharp entrance2. At (2), (3), and (4) Screwed elbows (90°) 3. At (6), Bend of R/d=124. At (7), fully opened globe valve5. At (8), Reentrant exitNote: Must make a table of the minor losses
A fire pump delivers water through a 15 cm main pipe to a hydrant to which is connected an 8 cm. hose, termination in a nozzle 2 cm in diameter. The nozzle, trained vertically up is 1.60 m above the hydrant and 12 m above the pump. The headlosses as follows: pump to hydrant: 3 m. ; at the hydrant 2 m. ; Hydrant to nozzle 12 m. and at the nozzle: 6 % of the velocity head of the nozzle. If the gage pressure at the pump is 550 kPa, to what vertical height can the jet of water thrown? include your free body diagram A.23.5 m B.27.5 m C.29.5 m D.25.5 m
A fire pump delivers water through a 15 cm main pipe to a hydrant to which is connected an 8 cm. hose, termination in a nozzle 2 cm in diameter. The nozzle, trained vertically up is 1.60 m above the hydrant and 12 m above the pump. The headlosses as follows: pump to hydrant: 3 m. ; at the hydrant 2 m. ; Hydrant to nozzle 12 m. and at the nozzle: 6 % of the velocity head of the nozzle. If the gage pressure at the pump is 550 kPa, to what vertical height can the jet of water thrown? (WITH FREE BODY DIAGRAM) CHOICES: A.23.5 m B.29.5 m C.25.5 m D.27.5 m
A fire pump delivers water through a 15 cm main pipe to a hydrant to which is connected an 8 cm. hose, termination in a nozzle 2 cm in diameter. The nozzle, trained vertically up is 1.60 m above the hydrant and 12 m above the pump. The headlosses as follows: pump to hydrant: 3 m.; at the hydrant 2 m.; Hydrant to nozzle 12 m. and at the nozzle: 6 % of the velocity head of the nozzle. If the gage pressure at the pump is 550 kPa, to what vertical height can the jet of water thrown? A. 25.5 m B. 29.5m C. 27.5 m D. 23.5m
A fire pump delivers water through a 15 cm main pipe to a hydrant to which is connected an 8 cm. hose, termination in a nozzle 2 cm in diameter. The nozzle, trained vertically up is 1.60 m above the hydrant and 12 m above the pump. The headlosses as follows: pump to hydrant: 3 m. ; at the hydrant 2 m. ; Hydrant to nozzle 12 m. and at the nozzle: 6 % of the velocity head of the nozzle. If the gage pressure at the pump is 550 kPa, to what vertical height can the jet of water thrown? A.23.5 m B.27.5 m C.25.5 m D.29.5 m
A fire pump delivers water through a 15 cm main pipe to a hydrant to which is connected an 8 cm. hose, termination in a nozzle 2 cm in diameter. The nozzle, trained vertically up is 1.60 m above the hydrant and 12 m above the pump. The headlosses as follows: pump to hydrant: 3 m. ; at the hydrant 2 m. ; Hydrant to nozzle 12 m. and at the nozzle: 6 % of the velocity head of the nozzle. If the gage pressure at the pump is 550 kPa, to what vertical height can the jet of water thrown? Show its FBD. Choices: A.29.5 m B.25.5 m C.27.5 m D.23.5 m