x=1, y=5 9. In figure 4, determine the pressure head difference in feet of water between m and n, whenz is (a)6.y in; (b)2y.x in; (c) 3y.x in9.1 Determine the value of z when the pressure at m is 1y.x Ib per sq in greater that at n9.2 If z=1y.xy in, then the pressure at m is increased by 5.yx Ib per sq in, while the pressureat n remains constant, determine the new value of z. Water,MercuryFig. 4

Since you have asked multiple questions, we will solve the first question for you. If you want any…

9. In figure 4, determine the pressure head difference in feet of water between m and n, when z is (a)6.y in; (b)2y.x in; (c) 3y.x in 9.1 Determine the value of z when the pressure at m is 1y.x lb per sq in greater that at n 9.2 If z=1y.xy in, then the pressure at m is increased by 5.yx lb per sq in, while the pressure at n remains constant, determine the new value of z.

9. In figure 4, determine the pressure head difference in feet of water between m and n, when z is (a)6.y in; (b)2y.x in; (c) 3y.x in 9.1 Determine the value of z when the pressure at m is 1y.x lb per sq in greater that at n 9.2 If z=1y.xy in, then the pressure at m is increased by 5.yx lb per sq in, while the pressure at n remains constant, determine the new value of z.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

If the pressure in a tank of oil (sp gr 0.85) is 376 kN/m2, what is the equivalent head (a) inmeters of oil; (b) in meters of water; (c) in meters of mercury? maintaining the liquid head h at 5.67 ft, to what pressure PA be raised in order to double the discharge?
A pipe, 12 inch in diameter at A, discharges 4.0 cfs of heavy fuel oil (sp gr = 0.899) into the air at B, where the diameter is 6 inch. If B is 12 ft above A and the frictional loss between the two points is equivalent to 3.0 lb per sq in, determine the pressure at A in pounds per square inch.
Q1 Determine the minimum size of glass tubing that can be used to measure water level, if the capillary rise in the tube is not to exceed 0.3 mm. Take surface tension of water in contact with air as 0.0735 N/m. A U-tube is made up of two capillaries of bores 1.2 m and 2.4 mm respectively. Q2) The tube is held vertical and partially filled liquid of surface tension 0.06 N/m and zero contact angle. If the estimated difference in the level of two menisci is 15 mm, determine the density the liquid. Q10) In measuring the unit energy of a mineral oil (specific gravity = 0.85) by the bubble method, a tube having an internal diameter of 1.5 mm is immersed to depth of 12.5 mm in oil. Air is forced through the tube forming a bubble at the lower end. What magnitude of the unit surface energy will be indicated by a maximum bubble pressure intensity of 150 N/m.
a. the total head loss due to friction (HL = hfs + hfd) in meters b. the total dynamic head in meters c. the water power in kW
In order to measure the pressure difference between two points in a pipeline carrying water, an inverted U tube is connected to the points, and air under atmospheric pressure is entrapped in the upper portion of the U-tube. If the manometer deflection is 0.8 m and the downstream tapping is 0.5 m below the upstream point, find the pressure difference between the two points
U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
Water at 20°C flows through the orifice in Fig. ,which is monitored by a mercury manometer. If d = 3 cm,(a) what is h when the flow rate is 20 m3/h and (b) what isQ in m3/h when h = 58 cm?
The plunger diameter of a single-acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10.3 m of water, and the water level in the sump is 3 m below the pump cylinder axis.1. Find the maximum allowable speed to operate the pump
Nitrogen gas under a pressure pn = 15 psig is used for pumping kerosene at 25°C (density = 816 kg/m3, viscosity = 1.81 cP) through an elevation increase of 6 m. If there is an effective length of 45 m of nominal 2-in. schedule No. 40 pipe (commercial steel) between the two tanks, what is the flow rate of kerosene? Neglect exit kinetic-energy effects.
The plunger diameter of a single acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10,3 m of water, and the water level in the sump is 3 m below the pump cylinder axis. 2.1 Find the maximum allowable speed to operate the pump 2.2 What power is expected in overcoming friction at this speed, take f=0.01
171 about industrial piping HOW IS THE HYDROSTATIC TEST PRESSURE DEFINED IN INDUSTRIAL PIPELINES?
Determine the surface tension in a tube with 0.3m radius and wetting angle 80 and capillary rise of 4.5mm in N/m and in lb/ft.