A 10 KW full load output power of shunt generator having an armature circuit resistance of 0.75 Q and a field resistance of 125 Q, generates a terminal voltage of 250 V at full load, Rotational losses is 400W. the efficiency of the generator at full load equals to 79.22% 81.81% 83.17% 82.49% A Moving to another question will save this response. Windows bu Windows slacl Jabl 25°C GJle ailE

A 10 KW full load output power of shunt generator having an armature circuit resistance of 0.75 Q and a field resistance of 125 Q, generates a terminal voltage of 250 V at full load, Rotational losses is 400W. the efficiency of the generator at full load equals to 79.22% 81.81% 83.17% 82.49% A Moving to another question will save this response. Windows bu Windows slacl Jabl 25°C GJle ailE

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction motor? Explain your answer.
Name three factors that determine the torque produced by an induction motor.
A separately excited generator has no-load voltage of 125V. A certain load rated at 1200W, 120V is then connected at the terminal. Calculate the series resistance needed to connect to the armature circuit in order for the load to operate at rated condition if the armature resistance is 0.0692Ω.
A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
A short shunt compound DC generator delivers a load current of 30 A at 220 V and has armature, series field and shunt field resistances of 0.05, 0.3 and 200Ω respectively. Calculate the induced emf, the armature current and the voltage regulation. Allow 1 V per brush for contact dro
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.
An A 20kW DC shunt generator having an armature circuit resistance of 0.8Ω and a field resistance of 140 Ω, generates a terminal voltage of 230V at full load. Determine the total iron, friction and windage losses if the efficiency of the generator at full load= 83%.
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A 110V shunt generator has a full load current of 100A, shunt field resistance of 55 ohms and constant losses of 500W. If full load efficiency is 88%, find the armature resistance. Assuming voltage to be constant at 110V, calculate the efficiency at half load. Find the load current.
A 10 kW shunt generator having an armature circuit resistance of 0.75 ohm and a field resistance of 125 ohm, generates a terminal voltage of 250V at full load. Determine the efficiency of the generator at full load, assuming the iron, friction and windage losses amount to 600W.
A 480 V, 50 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of 1.0 Ω. Its full-load armature current is 60 A at 0.8 PF lagging. Its friction and windage losses are 1.5 kW and core losses are 1.0 kW at 60 Hz at full load. Assume that the armature resistance (and, therefore, the I2Rlosses) a.b. i.ii. iii.c. d. e.can be ignored. The field current has been adjusted such that the no-load terminal voltage is 480 V. What is the speed of rotation of this generator?What is the terminal voltage of the generator if :it is loaded with the rated current at 0.8 PF lagging;it is loaded with the rated current at 1.0 PF;it is loaded with the rated current at 0.8 PF leading.What is the efficiency of this generator (ignoring the unknown electrical losses) when it is operating at the rated current and 0.8 PF lagging?How much shaft torque must be applied by the prime mover at the full load? how large is the induced counter-torque?What is the voltage regulation of this…